Fix T88808.
Caused by {rB5f2c5e5bb8c15bf0d6679351e3482f9c38c00935}
object type for `TEXT object` was missing in following check
that's why `Set Origin` option was lost from object context menu.
Reviewed By: lichtwerk
Maniphest Tasks: T88808
Differential Revision: https://developer.blender.org/D11495
This patch adds support for filtering rows based on rules and values.
Filters will work for any attribute data source, they are a property
of the spreadsheet rather than of the attribute system. The properties
displayed in the row filter can depend on data type of the currently
visible column with that name. If the name is no longer visible, the
row filter filter is grayed out, but it will remember the value until
a column with its name is visible again.
Note: The comments in `screen.c` combined with tagging the sidebar
for redraw after the main region point to a lack of understanding
or technical debt, that is a point to improve in the future.
**Future Improvements**
* T89272: A search menu for visible columns when adding a new filter.
* T89273: Possibly a "Range" operation.
Differential Revision: https://developer.blender.org/D10959
Currently B-Bone scaling can only be controlled via their
properties, thus requiring up to 8 drivers per joint between
B-Bones to transfer scaling factors from the handle bone.
A Scale Easing option is added to multiply the easing value
by the Y scale channels to synchronize them - this produces a
natural scaling effect where both the shape of the curve and
the scale is affected.
In addition, four toggles are added for each handle, which
multiply each of the X, Y, Z and Ease values by the matching
Local Scale channel of the handle bone, thus replacing trivial
drivers. The Scale Easing option has no effect on this process
since it's easy to just enable both Length and Ease buttons.
Differential Revision: https://developer.blender.org/D9870
In addition to the base bone transformation itself, B-Bones have
controls that affect transformation of its segments. For rotation
the features are quite complete, allowing to both reorient the
Bezier handles via properties, and to control them using custom
handle bones. However for scaling there are two deficiencies.
First, there are only X and Y scale factors (actually X and Z),
while lengthwise all segments have the same scaling. The ease
option merely affects the shape of the curve, and does not cause
actual scaling.
Second, scaling can only be controlled via properties, thus
requiring up to 6 drivers per joint between B-Bones to transfer
scaling factors from the handle bone. This is very inefficient.
Finally, the Z channels are confusingly called Y.
This commit adds a B-Bone Y Scale channel and extra B-Bone flag
fields to DNA with appropriate versioning (including for F-Curves
and drivers) in preparation to addressing these limitations.
Functionality is not changed, so the new fields are not used
until the following commits.
Differential Revision: https://developer.blender.org/D9870
This patch allows Windows users to specify that their current blender
installation should be used to create thumbnails and be associated
with ".blend" files. This is done from Preferences / System. The only
way to do this currently is from the command-line and this is sometimes
inconvenient.
Differential Revision: https://developer.blender.org/D10887
Reviewed by Brecht Van Lommel
This moves the flash on mode transfer effect option from the overlays to
an operator property of the mode transfer operator.
- This effect is intended to show the target object when no overlays or
a minimal set of overlays is enabled. Making it part of the whole set of
overlays invalidates this use case.
- The effect is not intended to be configurable per viewport, it should
be a global option.
The effect is still implemented using the overlay engine (instead of a
draw modal callback) due to performance and drawing artifacts. Having it
implemented as an overlay with runtime timer data in the objects makes
also possible to run multiple animations at the same time without any
visual glitches.
Reviewed By: campbellbarton, JulienKaspar
Differential Revision: https://developer.blender.org/D11519
Note: Linking in this case as in link vs. append. Easily confused with linking
a data-block to multiple usages (e.g. single material used by multiple
objects).
Adds a drop-down to the Asset Browser header to choose between Link and Append.
This is probably gonna be a temporary place, T54642 shows where this could be
placed eventually.
Linking support is crucial for usage of the asset browser in production
environments. It just wasn't enabled yet because a) the asset project currently
focuses on single user, not production assets, and b) because there were many
unkowns still for the workflow that have big impact on production use as well.
With the recently held asset workshop I'm more confident with enabling linking,
as design ideas relevant to production use were confirmed.
Differential Revision: https://developer.blender.org/D11536
Reviewed by: Bastien Montagne
Since Limit Rotation is based on Euler decomposition, it should allow
specifying the order to use for the same reasons as Copy Rotation does,
namely, if the bone uses Quaternion rotation for its animation channels,
there is no way to choose the order for the constraint.
Ref D9626
Fixed the logic for seeking in ffmpeg video files.
The main fix is that we now apply a small offset in ffmpeg_get_seek_pos
to make sure we don't get the frame in front of the seek position when
seeking backward.
The rest of the changes is general cleanup and untangling code.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11492
These were only showing in the Properties Editor, but there is no reason
to have the panels be different in the sidebar (they should not show in
the top bar though).
agreed upon by both @anoniov and @mendio
ref T88787
This implements T87633
This overlay renders a flash animation on the target object when
transfering the mode to it using the mode transfer operator.
This provides visual feedback when switching between objects without
extra overlays that affect the general color and lighting in the scene.
Differences with the design task:
- This uses just a fade out animation instead of a fade in/out animation.
The code is ready for fade in/out, but as the rest of the overlays
(face sets, masks...) change instantly without animation, having a fade
in/out effect gives the impression that the object flashes twice (once
for the face sets, twice for the peak alpha of the flash animation).
- The rendering uses a flat color without fresnel for now, but this can
be improved in the future to make it look more like the shader in the
prototype.
- Not enabled by default (can be enabled in the overlays panel), maybe
the defaults can change for 3.0 to disable fade inactive and enable this
instead.
Reviewed By: jbakker, JulienKaspar
Differential Revision: https://developer.blender.org/D11055
Sometimes is required to reset the thickness or the opacity of the strokes. Actually this was done using a modifier, but this operators solves this.
Reviewed By: mendio, filedescriptor
Maniphest Tasks: T87427
Differential Revision: https://developer.blender.org/D11453
This patch adds the base code needed to make the full-frame system work for both current tiled/per-pixel implementation of operations and full-frame.
Two execution models:
- Tiled: Current implementation. Renders execution groups in tiles from outputs to input. Not all operations are buffered. Runs the tiled/per-pixel implementation.
- FullFrame: All operations are buffered. Fully renders operations from inputs to outputs. Runs full-frame implementation of operations if available otherwise the current tiled/per-pixel. Creates output buffers on first read and free them as soon as all its readers have finished, reducing peak memory usage of complex/long trees. Operations are multi-threaded but do not run in parallel as Tiled (will be done in another patch).
This should allow us to convert operations to full-frame in small steps with the system already working and solve the problem of high memory usage.
FullFrame breaking changes respect Tiled system, mainly:
- Translate, Rotate, Scale, and Transform take effect immediately instead of next buffered operation.
- Any sampling is always done over inputs instead of last buffered operation.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D11113
Now FPS is displayed in the video source for videos to provide easy
access.
Reviewed By: Richard Antalik
Differential Revision: http://developer.blender.org/D11441
Added missing topbar in VSE.
Also added the Stabilizer options to Topbar for all modes.
Reviewed By: mendio, pepeland
Maniphest Tasks: T86465
Differential Revision: https://developer.blender.org/D11347
This patch adds an option in the Layers > Relations panel called "Disable Masks in Render".
When checked, no masks on this layer are included in the render.
Example:
| {F10087680} | {F10087681} |
See T88202 for why this is needed.
Reviewed By: antoniov
Maniphest Tasks: T88202
Differential Revision: https://developer.blender.org/D11234
This operator is a common request of animators to convert the transformation (inluding modifiers) of one grease pencil object, into a new object, generating strokes.
Reviewed By: pepeland
Maniphest Tasks: T87424
Differential Revision: https://developer.blender.org/D11014
Accessing data through RNA should never implicitely create it. Objects'
and particles' forcefields and collision settings were doing this.
Note that UI code also had to be tweaked to properly handle `None`
(NULL) cases.
Differential Revision: https://developer.blender.org/D11341
Previously, the "follow path constraint" and "follow parented curve"
were clamped. This restriction was lifted in rBcf2baa585cc8
Add back an option to get the old behavior in the "Path animation" settings.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D11263
Since version 2.80, the annotations of the Scene strip were not displayed in VSE. Also, the UI panel was`Grease Pencil` and must be `Annotation`
The problem was the offscreen render hasn't evil_CTX and the section of the annotation was never called.
Differential Revision: https://developer.blender.org/D11329
- Used try/except instead of a poll function.
- The error case referenced a non-existent error handling module.
Prefer poll functions over exception handling where possible,
also having an operators logic in a try block isn't good practice
as it can hide more serious errors in the code.
Note that duplicate pencil settings access should be moved into a
utility function. This can be part of a separate cleanup.
Now the operators work like other areas of Blender using the list of selected objects.
Also, the name has been changed to:
```Layers:
- Copy Layer to Selected
- Copy All Layers to Selected
Materials:
- Copy Material to Selected
- Copy All Materials to Selected```
Reviewed By: mendio, pablovazquez, pepeland
Differential Revision: https://developer.blender.org/D11216
Add translation/rotation/scale parameters for custom bones shapes. The
new scale is a 3D vector `custom_shape_scale_xyz`, and replaces the
`custom_shape_scale` float.
Reviewed By: #animation_rigging, sybren, zeddb
Differential Revision: https://developer.blender.org/D10974
The Cycle-Aware Keying option was added in 2.8 and is used
to allow keyframing over cyclic F-Curves without disturbing
the cycle (e.g. overwriting an end keyframe updates both ends).
This effect is not limited to auto keyframing and is applied
to any key insertion, but when the popovers were rearranged
it was put in the Auto-Keyframing related one for some reason.
This is misleading, especially since because of that the
option is incorrectly greyed out when auto keyframing is
disabled, so move it to the generic Keyframing popover.
Differential Revision: https://developer.blender.org/D11213
Now it's possible to append materials of one grease pencil object into another one. The operator allows active material or all materials.
Also, the Layer Copy To Object has been renamed to Layer Append to Object to keep consistency and now allows to append all layers at once.
This option should always be available. Even if it does not affect the
current object depending on its mode, it affects the rest of the geometry
of the scene.
The rest of the options also work this way. For example, a grease pencil
object does not have face orientation, but the ovelay option is still
there for the rest of the scene.
Reviewed By: JulienKaspar, HooglyBoogly
Maniphest Tasks: T83398
Differential Revision: https://developer.blender.org/D10215
Internally, when using Fill brush a dilate of the filled area was done, but this was hardcoded to 1 pixel.
In some situations, this was not enough, so now the value is accesible in the UI and can be set with different values.
Also, as this value is more used than `Leak Size`, the new Dilate is on Topbar, and Leak Size has been moved to Advanced panel.
All changes:
* Include `file.pack_libraries` and `file.unpack_libraries` to the menu
[1].
* Rename "Pack Blender Libraries" → "Pack Linked Libraries" [2].
* Rename "Unpack Blender Libraries" → "Unpack Linked Libraries" [2].
* Rename "Pack All Into .blend" → "Pack Resources" [3]
* Rename "Unpack All Into Files" → "Unpack Resources" [3]
* Rename "☑ Automatically Pack Into .blend" → "☑ Automatically Pack
Resources" [3]
* Rename "Make All Paths Relative" → "Make Paths Relative" [4]
* Rename "Make All Paths Absolute" → "Make Paths Absolute" [4]
* Add separators accordingly
---
[1] - This was never exposed since its original commit rB16411da41e40.
Now that operator not listed in menus don't
show up in the search, this became even more hidden.
[2] - The original name (Pack Blender Library) was not clear enough.
Pose Libraries and Asset Libraries are also technically Blender
libraries.
[3] - The term All was misleading since it didn't include the Linked
Libraries.
[4] - No need to use "All". It is not used in the Report/Find Missing
Files either.
This commit put this in the File > External Data menu.
Differential Revision: https://developer.blender.org/D11109
