There are cases where the default input passes of color+albedo do not yield useful results
and while this was possible to change that for final frame rendering (in the layer settings),
viewport denoising always used a fixed color+albedo. This adds an option to change the
input passes for viewport denoising too, so that one can use it in scenes that otherwise
wouldn't work well with it.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D10404
Support Python 3.10a5 or 3.9x with support explicitly enabled.
- Enable Python's postponed annotations for Blender's RNA classes
types registered on startup.
- Using postponed annotations has implications for how they are defined,
since they must evaluate in the modules name-space instead of the
classes name-space. See changes to annotations in `release/scripts`.
- Use `from __future__ import annotations` at the top of the module
to ensure the script will run with Python 3.10.
- Old logic is kept since it could be used if PEP-649 is supported.
Resolves T83626
Ref D10474
This makes custom mesh attributes available in Cycles. Typically,
these attributes are generated by Geometry Nodes, but they can also
be created with a Python script.
* The `subdivision` code path is not yet supported.
* This does not make vertex weights and some other builtin attributes
available in Cycles, even though they are accesible in Geometry Nodes.
All attributes generated in Geometry Nodes should be accessible though.
* In some cases memory consumption could be removed by not storing all
attributes in floats. E.g. booleans and integer attributes for which
all values are within a certain range, could be stored in less than
4 bytes per element.
Differential Revision: https://developer.blender.org/D10210
This patch will share the AOV settings between Cycles and Eevee.
It enable using the AOV name conflict detection of Blender. This
means that unlike how Cycles used to work it isn't possible to add an
AOV with a similar name. Conflicts with internal render pass names will
be indicated with an Warning icon.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D9774
Eevee is now used for Freestyle rendering by default, since other engines are
unlikely to have support for this. Workbench and Cycles do their own rendering.
RenderEngine add-ons can do their own Freestyle rendering by setting
bl_use_custom_freestyle = True.
Differential Revision: https://developer.blender.org/D8335
Using rna iterators in range-based for loops is possible since {rBc4286ddb095d32714c9d5f10751a14f5871b3844}.
This patch only updates the places that are easy to update
without more changes in surrounding code.
Differential Revision: https://developer.blender.org/D10195
The implementation is currently optimized to load animation sequences once
and then quickly scrubbing through them. Later on an option should be added
to optimize for memory usage and only load the current frame into memory.
Currently mesh and curve objects are supported, including support for UV and
vertex color attributes. Missing still is support for arbitrary attributes and
motion blur, as well as better handling of changing topology. Shader assignments
are made using FaceSets found in the Alembic archive.
The animation (and constant) data of the objects inside the Alembic archive is
loaded at once at the beginning of the render and kept inside a cache. At each
frame change we simply update the right socket of the corresponding Cycles node
if the data is animated. This allows for fast playback in the viewport
(depending on the scene size and compute power).
Note this is not yet exposed in the Blender UI, it's a feature that is still under
development and not ready for general use.
Ref T79174, D3089
Procedurals are nodes in the scene that can generate an arbitrary number of
other nodes at render time. This will be used to implement an Alembic procedural
that can load an Alembic file into Cycles nodes. In the future we also expect to
have a USD procedural.
Direct loading of such files at render time is a standard feature in other
production renderers. Reasons to support this are memory usage and performance,
delayed loading of heavy scene data until rendering, Cycles standalone rendering
using standard file formats beyond our XML files, and shared functionality for
Cycles integration in multiple 3D apps.
Ref T79174, D3089
This optimizes device updates (during user edits or frame changes in
the viewport) by avoiding unnecessary computations. To achieve this,
we use a combination of the sockets' update flags as well as some new
flags passed to the various managers when tagging for an update to tell
exactly what the tagging is for (e.g. shader was modified, object was
removed, etc.).
Besides avoiding recomputations, we also avoid resending to the devices
unmodified data arrays, thus reducing bandwidth usage. For OptiX and
Embree, BVH packing was also multithreaded.
The performance improvements may vary depending on the used device (CPU
or GPU), and the content of the scene. Simple scenes (e.g. with no adaptive
subdivision or volumes) rendered using OptiX will benefit from this work
the most.
On average, for a variety of animated scenes, this gives a 3x speedup.
Reviewed By: #cycles, brecht
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D9555
Branched path tracing is not supported for OptiX, and it would still use the
number of AA samples from there when branched path was enabled by the user
earlier but auto disabled and hidden in the UI when using OptiX.
Ref D10159
Partially reverts 2250b5cefe.
Removing the user count and fake user count icons was controversial (which was
expected) and there are a few further changes needed, that won't make it in
time for the release, see D9946.
While there is a design to bring back the user count and fake user indicators,
a new design idea was proposed that the UI team wants to follow. This came too
late for the 2.92 release, the new design is targeted at the 2.93 release now.
Meanwhile, UI team decision was to simply revert the design changes.
The new design is being worked on in https://developer.blender.org/T84669.
Note that this commit does not revert some internal changes done in
2250b5cefe. Namely the introduction of `ed_util_ops.c` and data-block
operators in there. These will still be needed in the new design.
The issue is that the "Noisy Image" pass is added even though it should not.
`use_denoising` has to be enabled on the scene and on the view layer
to actually enable it.
Differential Revision: https://developer.blender.org/D10048
Reviewers: lukasstockner97, brecht
In the Bake > Output panel, there is now a choice between Image Textures and
Vertex Colors. The active vertex color layer is used for baking. This works
with both existing per-corner and sculpt per-vertex vertex colors.
The previous design is rather old and has a couple of problems:
* Scalability: The current solution of adding little icon buttons next to the
data-block name field doesn't scale well. It only works if there's a small
number of operations. We need to be able to place more items there for better
data-block management. Especially with the introduction of library overrides.
* Discoverability: It's not obvious what some of the icons do. They appear and
disappear, but it's not obvious why some are available at times and others
not.
* Unclear Status: Currently their library status (linked, indirectly linked,
broken link, library override) isn't really clear.
* Unusual behavior: Some of the icon buttons allow Shift or Ctrl clicking to
invoke alternative behaviors. This is not a usual pattern in Blender.
This patch does the following changes:
* Adds a menu to the right of the name button to access all kinds of operations
(create, delete, unlink, user management, library overrides, etc).
* Make good use of the "disabled hint" for tooltips, to explain why buttons are
disabled. The UI team wants to establish this as a good practise.
* Use superimposed icons for duplicate and unlink, rather than extra buttons
(uses less space, looks less distracting and is a nice + consistent design
language).
* Remove fake user and user count button, they are available from the menu now.
* Support tooltips for superimposed icons (committed mouse hover feedback to
master already).
* Slightly increase size of the name button - it was already a bit small
before, and the move from real buttons to superimposed icons reduces usable
space for the name itself.
* More clearly differentiate between duplicate and creating a new data-block.
The latter is only available in the menu.
* Display library status icon on the left (linked, missing library, overridden,
asset)
* Disables "Make Single User" button - in review we weren't sure if there are
good use-cases for it, so better to see if we can remove it.
Note that I do expect some aspects of this design to change still. I think some
changes are problematic, but others disagreed. I will open a feedback thread on
devtalk to see what others think.
Differential Revision: https://developer.blender.org/D8554
Reviewed by: Bastien Montagne
Design discussed and agreed on with the UI team, also see T79959.
Adds support for building multiple BVH types in order to support using both CPU and OptiX
devices for rendering simultaneously. Primitive packing for Embree and OptiX is now
standalone, so it only needs to be run once and can be shared between the two. Additionally,
BVH building was made a device call, so that each device backend can decide how to
perform the building. The multi-device for instance creates a special multi-BVH that holds
references to several sub-BVHs, one for each sub-device.
Reviewed By: brecht, kevindietrich
Differential Revision: https://developer.blender.org/D9718
The issue is caused by stale data on the Mesh Node which is not cleared
during synchronizing since the socket API refactor so that we can detect
changes. However, synchronization only updates the sockets of the Mesh,
so other properties were left with outdated values.
This caused an underflow when computing attribute size for undisplaced
coordinates as it was using the current number of vertices minus the
previous count of subdivision vertices, which at this point should be 0.
Added a simple method to clear non socket data. Also modified
Mesh.add_undisplaced to always use an ATTR_PRIM_GEOMETRY as the data is
not subdivided yet and it avoids any further issues regarding computing
attribute sizes.
OptiX support is not in fact experimental anymore, so it is time for that notice to go.
All Cycles features that are currently supported on the GPU do work now when OptiX is selected.
This enables support for baking when OptiX is active, but uses CUDA for that behind the scenes, since
the way baking is currently implemented does not work well with OptiX.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D9784
Blender has now the place to store the Cryptomatte settings. This patch
migrates Cycles to use the new settings.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D9746
Now that the Blender sync mechanism deletes nodes from the scene, we need to
ensure scene update is stopped before we do this.
Also add some more early out in scene geometry update to ensure we do not
continue working on incomplete geometry data, though that was not the cause of
this crash.
Two issues:
* Automatic deduplication of OpenVDB grid data was failing when Cycles had
already cleared the OpenVDB grid, causing an empty grid. Instead rely on
Blender return the same OpenVDB grid pointer when deduplication is possible.
* The volume bounds mesh was not properly cleared when the OpenVDB grid was
empty, causing a mismatch between mesh and voxel data.
The issue is that the shaders are stolen from the original Geometry by
the temporary Geometry used to accumulate data, but the main thread
still needs them for syncing the attributes.
So make a copy of the shader array to preserve the data on the original
Geometry.
This encapsulates Node socket members behind a set of specific methods;
as such it is no longer possible to directly access Node class members
from exporters and parts of Cycles.
The methods are defined via the NODE_SOCKET_API macros in `graph/
node.h`, and are for getting or setting a specific socket's value, as
well as querying or modifying the state of its update flag.
The setters will check whether the value has changed and tag the socket
as modified appropriately. This will let us know how a Node has changed
and what to update, which is the first concrete step toward a more
granular scene update system.
Since the setters will tag the Node sockets as modified when passed
different data, this patch also removes the various modified methods
on Nodes in favor of Node::is_modified which checks the sockets'
update flags status.
Reviewed By: brecht
Maniphest Tasks: T79174
Differential Revision: https://developer.blender.org/D8544
This patch allows the user to type a property name into the
Attribute node, which will then output the value of the property
for each individual object, allowing to e.g. customize shaders
by object without duplicating the shader.
In order to make supporting this easier for Eevee, it is necessary
to explicitly choose whether the attribute is varying or uniform
via a dropdown option of the Attribute node. The dropdown also
allows choosing whether instancing should be taken into account.
The Cycles design treats all attributes as one common namespace,
so the Blender interface converts the enum to a name prefix that
can't be entered using keyboard.
In Eevee, the attributes are provided to the shader via a UBO indexed
with resource_id, similar to the existing Object Info data. Unlike it,
however, it is necessary to maintain a separate buffer for every
requested combination of attributes.
This is done using a hash table with the attribute set as the key,
as it is expected that technically different but similar materials
may use the same set of attributes. In addition, in order to minimize
wasted memory, a sparse UBO pool is implemented, so that chunks that
don't contain any data don't have to be allocated.
The back-end Cycles code is already refactored and committed by Brecht.
Differential Revision: https://developer.blender.org/D2057
Uniform attributes require immediate access to the shader list
in object update code, so setting the field can't be deferred
to a background task. This required adding a parameter to the
clear method of Geometry.
Ref D2057
The issue stems from the fact that scene arrays are not cleared when rendering is done. This was not really an issue before the introduction of the ownership system (rB429afe0c626a) as the id_map would recreate scene data arrays based on their new content. However, now that the id_maps do not have access to the scene data anymore the arrays are never created.
Another related issue is that the BlenderSync instance is never freed when the persistent data option is activated.
To fix this, we delete nodes created by the id_maps in their destructors, and delete the BlenderSync instance before creating a new one, so the id_maps destructors are actually called.
Reviewed By: brecht
Maniphest Tasks: T82129
Differential Revision: https://developer.blender.org/D9378
