Add an RNA function `activate_asset_by_id(asset_id: ID, deferred: bool)`
to the File Browser space type, which intended to be used to activate an
asset's entry as identified by its `ID *`. Calling it changes the active
asset, but only if the given ID can actually be found.
The activation can be deferred (by passing `deferred=True`) until the
next refresh operation has finished. This is necessary when an asset has
just been added, as it will be loaded by the filebrowser in a background
job.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10549
I landed D10527 in rB1a8aee0a7cec accidentally, and the version there was
missing a name change discussed in review. This commit just renames the
boolean variable controlling the special behavior for attribute search.
Original message meant for this change:
For geometry nodes we will use search buttons to display a list of
attributes available the last time the node tree was executed (D10519).
Because this list is just a hint, we need to be able to enter any string,
not just strings from the search items.
This patch adds a boolean option to string buttons to enable this.
The change is quite simple, changes to behavior are only required in
two places. The type-specific button struct changes help a lot here.
Differential Revision: https://developer.blender.org/D10527
Currently when you open an RNA collection search button, like a
vertex group selector, the search filter isn't applied until you
start typing, in order to display every option at the start.
Otherwise they wouldn't be visible, since the search filter would
run for the current text.
Currently this check happens in one place, but it relies on the
`changed` value of `uiBut`. This is fine in the interface directory,
but anywhere else it would require exposing `uiBut.changed`, which
is probably too low-level to expose.
The solution is adding an `is_first` argument to the search callbacks,
which is nice for a few reasons:
- They work at a higher level of abstraction, meaning they don't
have to worry about how exactly to tell if this is the first
search.
- It makes it easier to do special behavior when the search menu
is first opened.
- Then, obviously, it makes that state accessible without including
`interface_intern.h`.
Needed for attribute search: T85658
Differential Revision: https://developer.blender.org/D10528
Move some drawing code from `area.c` and `ed_util.c` into `ed_draw.c`.
This is to support the new generic slider that wil be used in T81785.
No functional changes.
Reviewed By: #animation_rigging, #user_interface, Severin, sybren
Maniphest Tasks: T81785
Differential Revision: https://developer.blender.org/D9313
Render previews for Action datablocks by rendering the scene camera with
the Workbench (solid) engine. The //look// can be configured by setting
the scene's render engine to Workbench and editing the scene's shading
properties.
It is assumed that the pose has already been applied and that the scene
camera is capturing the pose. In other words, the render function just
renders from the scene camera without evaluating/applying the Action
stored in `preview->id`. The ID is only used to determine its type and
to store the resulting preview.
Not all code paths that lead to the `action_preview_render()` function
actually provide a depsgraph. The "Refresh Asset Preview" button
(`ED_OT_lib_id_generate_preview`) does, but `WM_OT_previews_ensure` does
not.
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D10543
When closing the blender, while the callbacks are removed, the
reference count of the object used as `customdata` is not decremented.
This commit adds two functions that correctly release the
python `draw_callbacks` before releasing all `draw_callbacks`.
Differential Revision: https://developer.blender.org/D10478
The "quick setup" dialog is actually a 'menu', and the "splash screen" block
contains the UI_BLOCK_LOOP flag which causes the buttons' text to align
to the left, however, usually regular buttons have centered text.
As a workaround, add the UI_BLOCK_QUICK_SETUP flag which prevents
the text from being left-aligned.
Differential Revision: https://developer.blender.org/D10486
Reviewed by: Julian Eisel
This patch implements the list panel system D7490 for FCurve modifiers.
The UI layouts are updated to make use of subpanels and to be consistent
with the rest of the interface, and easier to understand.
See the differential revision for screenshots.
This commit also significantly cleans up the FModifier UI code, and
improves, mainly by replacing the old button creation code is with
the newer interface API using RNA. In turn there is a bit of complexity
added because each FModifier has a separate panel.
Although reordering of FModifiers was not implemented before, we get
drag and drop basically for free here, so it is also included.
As noted in some older to do tasks, FModifiers aren't evaluated
in perfect order, which may be a point of improvement for the future.
Differential Revision: https://developer.blender.org/D7997
E.g. steps to reproduce:
* Enter Vertex Paint mode
* In the tool settings, right-click > "Edit Source"
When creating a number slider via `layout.prop(..., slider=True)`, the UI code
would reallocate the number button to be a number-slider button. That's because
we now actually have different button data-structures for these (see
e6f0b60c2e). The edit source code stored data based on the button pointers,
which didn't get updated after changing the type. The fix just adds this
updating.
This will allow using C++ data structures to draw node error messages.
This required removing a forward declared enum for grease pencil undo.
Compiles with clang tidy.
Caused by rB5b34d11b55e0.
Above commit restored the view matrices in ED_view3d_draw_offscreen
_before_ they can be stored in the ImBuff (see ED_view3d_draw_offscreen
/ texture_paint_image_from_view_exec).
Now make restoring the view matrices optional and dont do this in case
of reprojection, so the used matrices can still be saved in the ImBuff
later.
Reviewed By: campbellbarton
Maniphest Tasks: T85395
Differential Revision: https://developer.blender.org/D10331
Add a bar between keyframes to indicate that keyframe is still used. This is part of a change to make the rec button be used by gpencil.
Example:
Before:
{F9592704}
After:
{F9592702}
Reviewed By: #user_interface, #grease_pencil, pepeland, Severin
Maniphest Tasks: T85463
Differential Revision: https://developer.blender.org/D10179
This commit is a refactor of the fill tool to solve several problems we had since the first version of the tool.
Changes:
* The filling speed has been improved for each step of the process with the optimization of each algorithm/function.
* New `AutoFit` option to fill areas outside of the viewport. When enable, the total size of the frame is calculated to fit the filling area.
* New support multiframe filling. Now it is possible to fill multiple similar frames in one go.
* New `Stroke Extension` option to create temporary closing strokes. These strokes can be displayed and adjusted dynamically using wheel mouse or PageUp/Down keys.
* Parameter `Resolution` now is named `Precision` and has been moved to topbar.
* `Resolution` now has decimals and can be lower than 1 to allow quick filling in storyboarding workflows. Maximum value has been set as 5.
* Parameter `Simplify` has been moved to Advanced panel.
* Improved fill outline detection. In some cases, the outline penetrated the area to be filled with unexpected results.
* Fixes some corner case bugs with infinite loops.
As a result of this refactor, also these new functionalities has been added.
* New support for multiframe in `Draw` mode. Any drawing in active frame is duplicated to all selected frame.
* New multiframe display mode. Keyframes before or after of the active frame are displayed using onion colors. This can be disable using Onion overlay options.
This avoids adding DNA_ID.h into other headers, recently changed in
cfa48c84d0
Note that other enums could be moved too, this is a smaller change
to avoid indirectly including DNA_ID.h in many places.
This commit moves the property layout callbacks for node types to their
implementation files from `drawnode.c`. This was proposed a while ago in
T75724.
**Benefits**
- Fewer files need to be changed when adding a new node.
- Makes it possible to reuse functions from the node's implementation
in the layout code.
- Except for RNA, all of the node "inputs" are in the same place.
- Code gets shorter overall, avoids the large switch statements.
**Downsides**
- Requires including two UI headers.
- Requires adding an editors dependency to the nodes folder.
This commit only changes function nodes and geometry nodes, more can be
moved later.
Differential Revision: https://developer.blender.org/D10352
Simple change that shows all the enums used in the transform code and helps
to better understand the role of the members of the struct TransInfo.
It also allows the IDE to show the name of the value represented by the
member instead of a number that needs to be consulted.
Differential Revision: https://developer.blender.org/D10312
This is something what comes after an experiment, which makes behavior
more desirable. Basically, for Lock-to-Selection functionality always
use control point position if any of control point itself or handles
are selected.
Initial patch from Sebastian, modification from Sergey.
Differential Revision: https://developer.blender.org/D10265
Move `eUndoStepDir` to `BKE_undo_system.h` and use its values
everywhere.
Note that this also introduce the `STEP_INVALID` value in that enum.
Finally, kept the matching struct members in some lower-level readfile
code as an `int` to avoid having to include `BKE_undo_system.h` in a lot
of unrelated files.
Previously this relied on the dependency graph to detect changes in the screen
datablock, which would then notify the renderers. This was rather indirect an
not even really by design. Instead use notifiers to tag specific 3D viewports
to be updated.
Includes changes to BKE_scene_get_depsgraph to accept a const Scene pointer.
Testing if this works correctly requires adding back commits 81d444c and 088904d,
since those have been temporarily reverted.
Differential Revision: https://developer.blender.org/D10235
Long data-block names are clipped to fit into data-block selector menus. For
linked data-blocks, there's also a hint indicating the source library, which
takes further space and may get clipped too.
So this commit adds a tooltip to the menu items, which displays the full,
unclipped data-block name and the unclipped library name. Plus, the library
path is shown too, which is also useful info.
Adds helper functions for search menu item tooltips, so these are easier to add
to other search menus in future.
Part of T84188.
Adding new tracks, mask points, mask primitives, changing selection was
causing an unwanted jumps in the view.
This change makes it so those operations are preserving view offset.
Differential Revision: https://developer.blender.org/D10146
Passing 4x arguments for the rectangle,
mixed in with round-box radius & color wasn't very readable.
Instead, pass a `rctf` as the first argument to UI box drawing functions.
The new GPU_SHADER_2D_WIDGET_BASE shader allows us to draw
many complex shapes with anti-aliasing.
One thing it can do is draw an opaque rounded rectangle with colors
that differ between its interior and outline.
In order to do the above in a single pass I recently added an "_ex"
version of UI_draw_roundbox that exposes most of that shaders features.
This simplifies interface_draw.c by removing redundancy in the calling
of this shader by using this new uber "_ex" version.
Ref D10189
Simplification and changes to the Navigation gizmo. Better indication of negative axes, consistent use of color and size to indicate orientation, ability to be resized.
Differential Revision: https://developer.blender.org/D9744
Reviewed by Campbell Barton
Regression from d8992192e5
The original code relied on having a separate edit-object pointer
than the active object.
Use a utility function to avoid code duplication as there are
other areas that have similar functionality.
This commit moves runtime-only variables from the `SpaceNode`
DNA struct to a private struct in `node_intern.h`. Before, it was hard
to tell which data needed to be saved in files, this should make it
more clear.
Node that the `edittree` field is basically a runtime variable, since
it's set from the `treepath` list on read, but moving it would require
some more invasive changes that I don't think are worth it right now.
Also, not all of the moved variables were explicitly cleared on read--
`aspect` is set at the start of a redraw, `cursor` is set in a region
callback, and `recalc` was used as an update flag.
Differential Revision: https://developer.blender.org/D10141
