This is a leftover from when there was a global option for transparent
shadows, but since it's now per material this makes no sense anymore.
Solution found by Olivier Maury.
Pull Request: https://projects.blender.org/blender/blender/pulls/117735
The first two dimensions of scrambled, shuffled Sobol and shuffled PMJ02 are
equivalent, so this makes no real difference for the first two dimensions.
But Sobol allows us to naturally extend to more dimensions.
Pretabulated Sobol is now always used, and the sampling pattern settings is now
only available as a debug option.
This in turn allows the following two things (also implemented):
* Use proper 3D samples for combined lens + motion blur sampling. This
notably reduces the noise on objects that are simultaneously out-of-focus
and motion blurred.
* Use proper 3D samples for combined light selection + light sampling.
Cycles was already doing something clever here with 2D samples, but using
3D samples is more straightforward and avoids overloading one of the
dimensions.
In the future this will also allow for proper sampling of e.g. volumetric
light sources and other things that may need three or four dimensions.
Differential Revision: https://developer.blender.org/D16443
Materials now have an enum to set the emission sampling method, to be
either None, Auto, Front, Back or Front & Back. This replace the
previous "Multiple Importance Sample" option.
Auto is the new default, and uses a heuristic to estimate the emitted
light intensity to determine of the mesh should be considered as a light
for sampling. Shaders sometimes have a bit of emission but treating them
as a light source is not worth the memory/performance overhead.
The Front/Back settings are not important yet, but will help when a
light tree is added. In that case setting emission to Front only on
closed meshes can help ignore emission from inside the mesh interior that
does not contribute anything.
Includes contributions by Brecht Van Lommel and Alaska.
Ref T77889
Changing volume parameters during rendering could cause a crash
when guiding was enabled. It was due to an unintialized state paramter
at the beginning of the path tracing process.
In addition guiding is disabled when dealing with almost delta volumes
(i.e., g close to 1.0 or -1.0).
This adds path guiding features into Cycles by integrating Intel's Open Path
Guiding Library. It can be enabled in the Sampling > Path Guiding panel in the
render properties.
This feature helps reduce noise in scenes where finding a path to light is
difficult for regular path tracing.
The current implementation supports guiding directional sampling decisions on
surfaces, when the material contains a least one diffuse component, and in
volumes with isotropic and anisotropic Henyey-Greenstein phase functions.
On surfaces, the guided sampling decision is proportional to the product of
the incident radiance and the normal-oriented cosine lobe and in volumes it
is proportional to the product of the incident radiance and the phase function.
The incident radiance field of a scene is learned and updated during rendering
after each per-frame rendering iteration/progression.
At the moment, path guiding is only supported by the CPU backend. Support for
GPU backends will be added in future versions of OpenPGL.
Ref T92571
Differential Revision: https://developer.blender.org/D15286
The multi-dimensional Sobol pattern required us to carefully use as low
dimensions as possible, as quality goes down in higher dimensions. Now that we
have two sampling patterns that are at least as good, there is no need to keep
it around and the implementation can be simplified.
Differential Revision: https://developer.blender.org/D15788
Based on the paper "Practical Hash-based Owen Scrambling" by Brent Burley,
2020, Journal of Computer Graphics Techniques.
It is distinct from the existing Sobol sampler in two important ways:
* It is Owen scrambled, which gives it a much better convergence rate in many
situations.
* It uses padding for higher dimensions, rather than using higher Sobol
dimensions directly. In practice this is advantagous because high-dimensional
Sobol sequences have holes in their sampling patterns that don't resolve
until an unreasonable number of samples are taken. (See Burley's paper for
details.)
The pattern reduces noise in some benchmark scenes, however it is also slower,
particularly on the CPU. So for now Progressive Multi-Jittered sampling remains
the default.
Differential Revision: https://developer.blender.org/D15679
These replace float3 and packed_float3 in various places in the kernel where a
spectral color representation will be used in the future. That representation
will require more than 3 channels and conversion to from/RGB. The kernel code
was refactored to remove the assumption that Spectrum and RGB colors are the
same thing.
There are no functional changes, Spectrum is still a float3 and the conversion
functions are no-ops.
Differential Revision: https://developer.blender.org/D15535
This was tested in some places to check if code was being compiled for the
CPU, however this is only defined in the kernel. Checking __KERNEL_GPU__
always works.
For transparency, volume and light intersection rays, adjust these distances
rather than the ray start position. This way we increment the start distance
by the smallest possible float increment to avoid self intersections, and be
sure it works as the distance compared to be will be exactly the same as
before, due to the ray start position and direction remaining the same.
Fix T98764, T96537, hair ray tracing precision issues.
Differential Revision: https://developer.blender.org/D15455
This patch unifies the names of math functions for different data types and uses
overloading instead. The goal is to make it possible to swap out all the float3
variables containing RGB data with something else, with as few as possible
changes to the code. It's a requirement for future spectral rendering patches.
Differential Revision: https://developer.blender.org/D15276
This adds support for selective rendering of caustics in shadows of refractive
objects. Example uses are rendering of underwater caustics and eye caustics.
This is based on "Manifold Next Event Estimation", a method developed for
production rendering. The idea is to selectively enable shadow caustics on a
few objects in the scene where they have a big visual impact, without impacting
render performance for the rest of the scene.
The Shadow Caustic option must be manually enabled on light, caustic receiver
and caster objects. For such light paths, the Filter Glossy option will be
ignored and replaced by sharp caustics.
Currently this method has a various limitations:
* Only caustics in shadows of refractive objects work, which means no caustics
from reflection or caustics that outside shadows. Only up to 4 refractive
caustic bounces are supported.
* Caustic caster objects should have smooth normals.
* Not currently support for Metal GPU rendering.
In the future this method may be extended for more general caustics.
TECHNICAL DETAILS
This code adds manifold next event estimation through refractive surface(s) as a
new sampling technique for direct lighting, i.e. finding the point on the
refractive surface(s) along the path to a light sample, which satisfies Fermat's
principle for a given microfacet normal and the path's end points. This
technique involves walking on the "specular manifold" using a pseudo newton
solver. Such a manifold is defined by the specular constraint matrix from the
manifold exploration framework [2]. For each refractive interface, this
constraint is defined by enforcing that the generalized half-vector projection
onto the interface local tangent plane is null. The newton solver guides the
walk by linearizing the manifold locally before reprojecting the linear solution
onto the refractive surface. See paper [1] for more details about the technique
itself and [3] for the half-vector light transport formulation, from which it is
derived.
[1] Manifold Next Event Estimation
Johannes Hanika, Marc Droske, and Luca Fascione. 2015.
Comput. Graph. Forum 34, 4 (July 2015), 87–97.
https://jo.dreggn.org/home/2015_mnee.pdf
[2] Manifold exploration: a Markov Chain Monte Carlo technique for rendering
scenes with difficult specular transport Wenzel Jakob and Steve Marschner.
2012. ACM Trans. Graph. 31, 4, Article 58 (July 2012), 13 pages.
https://www.cs.cornell.edu/projects/manifolds-sg12/
[3] The Natural-Constraint Representation of the Path Space for Efficient
Light Transport Simulation. Anton S. Kaplanyan, Johannes Hanika, and Carsten
Dachsbacher. 2014. ACM Trans. Graph. 33, 4, Article 102 (July 2014), 13 pages.
https://cg.ivd.kit.edu/english/HSLT.php
The code for this samping technique was inserted at the light sampling stage
(direct lighting). If the walk is successful, it turns off path regularization
using a specialized flag in the path state (PATH_MNEE_SUCCESS). This flag tells
the integrator not to blur the brdf roughness further down the path (in a child
ray created from BSDF sampling). In addition, using a cascading mechanism of
flag values, we cull connections to caustic lights for this and children rays,
which should be resolved through MNEE.
This mechanism also cancels the MIS bsdf counter part at the casutic receiver
depth, in essence leaving MNEE as the only sampling technique from receivers
through refractive casters to caustic lights. This choice might not be optimal
when the light gets large wrt to the receiver, though this is usually not when
you want to use MNEE.
This connection culling strategy removes a fair amount of fireflies, at the cost
of introducing a slight bias. Because of the selective nature of the culling
mechanism, reflective caustics still benefit from the native path
regularization, which further removes fireflies on other surfaces (bouncing
light off casters).
Differential Revision: https://developer.blender.org/D13533
* Replace license text in headers with SPDX identifiers.
* Remove specific license info from outdated readme.txt, instead leave details
to the source files.
* Add list of SPDX license identifiers used, and corresponding license texts.
* Update copyright dates while we're at it.
Ref D14069, T95597
We need to increase GPU memory usage a bit. Unfortunately we can't get away
with writing either reflection or transmission passes because these BSDFs may
scatter in either direction but still must be in a fixed reflection or
transmission category to match up with the color passes.
We need to store the continuation probability used to make the termination
decision in intersect_closest, instead of recomputing it in shade_surface.
Because otherwise a shade_volume in between can change the throughput and
change the probability.
Remove prefix of filenames that is the same as the folder name. This used
to help when #includes were using individual files, but now they are always
relative to the cycles root directory and so the prefixes are redundant.
For patches and branches, git merge and rebase should be able to detect the
renames and move over code to the right file.
