This makes it easier to track as well as allowing us to sample the same
texture with different sampling parameters (which should fix the related
T73942 in the long run).
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D7831
When editing a complex curve is very annoying to have all handles at a time. Also, this is a requirement for the current GSoC Edit Grease Pencil using curves.
I have seen that this improvement can be used in any other area of blender, so I have decided to publish the option in the overlay panel..
Reviewed By: fclem, #user_interface, billreynish, Severin
Differential Revision: https://developer.blender.org/D7754
This resolves a performance regression in 2.8x where every edit-mode
update performed an edit-mesh to mesh conversion.
Now the conversion will be lazily initialized if/when it's required.
New BKE_mesh_wrapper_* functions abstract over mesh data access.
Currently only edit-mesh and regular meshes are supported.
In the future sub-surface meshes may be supported too.
Also put glDisable(GL_DITHER) in it since we don't even use it (but is
enabled by default).
Also leave GL_MULTISAMPLE on by default since it has no impact on non-MSAA
framebuffers.
When sculpting the GPU batches are constructed with only the required data
for a single viewport. When that viewport changes shading or coloring mode (object
to vertex) batches might not hold all the needed information.
There is also a case when you have two 3d viewport one in object color
mode and the other in vertex color mode that the GPU batches were
updated without any vertex colors.
In order to fix these category of issues this patch would always
construct the full GPU batches for sculpting.
Reviewed By: Clément Foucault, Pablo Dobarro
Maniphest Tasks: T75908
Differential Revision: https://developer.blender.org/D7701
Now the brushes have several new random settings and use curves to define the effect. The curves have been moved below the parameter to keep UI standards and extra curve panels have been removed.
{F8505387}
The new curves are:
* Hue.
* Saturation.
* Value.
New option to random at stroke level instead to random at point level for the following values:
* Thickness.
* Strength.
* UV.
* Hue.
* Saturation.
* Value.
Curves have been moved below the corresponding parameter and only are displayed in properties panel. Display the curves in the popover made it unusable.
{F8505392}
Also, the Pressure random has been renamed to Radius because the old name was not clear enough.
Reviewed By: mendio, pablovazquez
Differential Revision: https://developer.blender.org/D7577
Allow render engine info to display correctly among other text overlays and scene statistics.
Differential Revision: https://developer.blender.org/D7586
Reviewed by Brecht Van Lommel
This patch enables TBB as the default task scheduler. TBB stands for Threading Building Blocks and is developed by Intel. The library contains several threading patters. This patch maps blenders BLI_task_* function to their counterpart. After this patch we can add more patterns. A promising one is TBB:graph that can be used for depsgraph, draw manager and compositor.
Performance changes depends on the actual hardware. It was tested on different hardwares from laptops to workstations and we didn't detected any downgrade of the performance.
* Linux Xeon E5-2699 v4 got FPS boost from 12 to 17 using Spring's 04_010_A.anim.blend.
* AMD Ryzen Threadripper 2990WX 32-Core Animation playback goes from 9.5-10.5 FPS to 13.0-14.0 FPS on Agent 327 , 10_03_B.anim.blend.
Reviewed By: brecht, sergey
Differential Revision: https://developer.blender.org/D7475
Caused by rBe82827bf6ed5.
DRW_draw_depth_object calls DRW_mesh_batch_cache_create_requested with
NULL scene, but that is accessed later on...
Scene is actually available, so pass that around.
Maniphest Tasks: T76131
Differential Revision: https://developer.blender.org/D7540
The material indices in a mesh can exceed the number of available materials
slots in the object or mesh, sculpt drawing was not taking that into account.
Other draw loops also avoid the overhead of grease pencil drawing when there
are no grease pencil objects in the scene. It's a little faster to skip those
shaders and buffer when not needed.
The loop normal VBO is used in two manners. In edit mode to draw the
edge normals. And in paint mode to draw the wireframe. This commit
checks which VBO is needed and build the correct one.
This allows show the wireframe correct in paint mode, when the object is
subdivided.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D7419
This solution involves adding a uniform to each fragment shader that is
used by gizmo drawing and use the framebuffer state to set this uniform
accordingly.
This solution can also be carried to external shaders (addons).
A single line of code would then be enough to fix the issue.
The only trickery here is the dummy define:
`#define srgb_to_framebuffer_space(a)`
This is in order to avoid breaking other DRW shaders that use the same
fragment shader code but do not need the tranformation.
Related to T74139
Reviewed By: brecht, campbellbarton
Differential Revision: https://developer.blender.org/D7261
The radius component is only one float. This resulted in only a third of
intended points to draw and could lead to glitches.
Pointcloud drawing will still change a lot in the future, this is just
to be able to work on some simple tools.
Differential Revision: https://developer.blender.org/D7390
Tasks: move priority from task to task pool {rBf7c18df4f599fe39ffc914e645e504fcdbee8636}
Tasks: split task.c into task_pool.cc and task_iterator.c {rB4ada1d267749931ca934a74b14a82479bcaa92e0}
Differential Revision: https://developer.blender.org/D7385
Since rBcf258b02f449, only wires and edges that are mapped to the
original mesh were drawn if the mesh was modified by modifiers.
Above commit was only meant for showing orig wires for paint mask
overlays [where final wireframe is not desired], so now only use
MR_EXTRACT_MAPPED when we are in a paint mode.
Maniphest Tasks: T75343
Differential Revision: https://developer.blender.org/D7333
This was already fixed in rB985f33719ce9 once.
But resurfaced after rB7070e4c15e6c [which just reverted a bit too much
;)].
Spotted while looking into T75263.
Differential Revision: https://developer.blender.org/D7308
Note this only changes cases where the variable was declared inside
the for loop. To handle it outside as well is a different challenge.
Differential Revision: https://developer.blender.org/D7320
The files are now split up into the following sections:
- `BKE_anim_path.h` and `anim_path.c` for path/curve functions.
- `BKE_anim_visualization.h` and `anim_visualizationanim_path.c` for
animation visualization (mostly motion paths).
- `BKE_duplilist.h` for DupliList function declarations. These were
already implemented in `object_dupli.c`, so they were rather out of
place being declared in `BKE_anim.h` in the first place.
No functional changes.
In Blender 2.81 we update and draw all nodes inside the view planes.
When navigating with a pen tablet after an operation that tags the whole
mesh to update (like undo or inverting the mask), this introduces some
lag as nodes are updating when they enter the view. The viewport is not
fully responsive again until all nodes have entered the view after the
operation.
This commit delays nodes updates until the view navigation stops, so the
viewport navigation is always fully responsive. This introduces some
artifacts while navigating, so it can be disabled if you don't want to
see them.
I'm storing the update planes in the PBVH. This way I can add support
for some tools to update in real-time only the nodes inside this plane
while running the operator, like the mesh filter.
Reviewed By: jbakker
Differential Revision: https://developer.blender.org/D6269
Due to legacy this overlay was implemented twice (Edit Mesh and Weight
Painting) with different results. This patch consolidates both drawing
and uses only the Weight Painting drawing.
