#define B_UNLINKIMA 1358
Since it was undefined and causing things not to compile. Whoever added it
might want to move it but hey its working again for now. ;)
Kent
When choosing "render engine" in Scene Buttons, the newly added or removed
Panels didn't invoke a re-alignment event yet.
Also added code that inserts new panels as good as possible on their
previous locations. This works reliable for 1 new panel, not for more, this
because a Panel only stores its old location, not the locations of all
Panels in a given configuration. Consider that minor issue...
On large changes of the Lattice resolution button, the undopush crashed.
Reason was that the push happened for buttons before the actual event for
buttons was executed.
Solved by creating new event UNDOPUSH that's being added to the queue by
by buttons now.
- Made button undo texts for number buttons more clear
- Added undo push for missing Add lamp/empty/lattice/camera
- Deformed mesh didnt give correct 'orco' anymore on render
- Mesh editmode, "Separate loose parts", crash on empty mesh (no verts)
- Global undo; buttons sending redraw events gave extra undo push called
"Make single user or local". That latter was wrong event handling for
REDRAW event, harmless, until now :)
First one is a real showstopper... bah!
compiled in (datatoc) and doesn't need installation anymore.
Also reviewed weird path conventions for searching AA fonts;
- U.fontdir is only used as standard search path for fileselecting
- U.fontname stores only full path to AA font if used one
- If a font cannot be found, it always falls back to the compiled in one
- If .B.blend is saved with default font, U.fontname is not set
Also added a button in usermenu "restore default".
When this works as expected, I'll commit changes for installation too.
- The function "convex()" in editmesh_lib() actually did not deliver
a proper test for convex at all. It was checking only if a quad could
be subdivided into 2 trias. Code for adding face (FKEY) used this
call in total confusing manner. That code was there in 1.40 already,
cannot find any clue what it was supposed todo... :)
Recoded convex() to deliver a proper test. FKEY will give warning on
attempt to make convex faces now.
- Added undo-free for editmode undo on file load
- Curve Join now moves all curves to 2D (if its 2D)
- FGon extrude keeps FGon flags correctly
- After Append undo-push added
- In almost all Ipo editing commands; undo-push added
- Icons in outliner now all consistant grey
- Zoffs button had to 20 high (hmetal :)
- Individual faces
Keeps Mesh manifold, so removes old faces always. Also uses a
transform based on different vectors per vertex.
- Only edges
Just extrudes the edges (not really 'individual', the edges still
share the vertices. Uses same transform as normal extrude for that
reason
- Only Vertices
Uses normal transform after extrude
Also changed code a bit, to detect whether to call a normal-based
transform after extrude, or whether to call normal grabber. For example
when you just extrude 1 edge, it uses normal grabber.
Note; extruding an entire sphere goes OK with 'individual faces'. for
other extrudes you should press 's key' when in transform. Just cannot
predict (yet) when one method has preference over another.
selection already is 2 triangles, it should create a new face but
remove the old triangles. It actually calls the 'ALT+J' command then
(join triangles)
While testing found out more cases where new selection flags were not
properly used (join trias, beauty fill, flip edges, rotate edges)
adds new features for indenting and commenting.
Note: I am not sure if the best menu spot for these features
is under the Select menu, but we can argue about that later.
They do work on a selection, though.
from the mailing list post:
1&2. Added Indent/Unindent under Edit->Select
just select the text you want to indent and go to the menu (
note if nothing is selected Indent will just indent ( tab )
the line the line )
3&4. Added Comment/Uncomment to the same menu
same applies as above
5. Added Tab setting on the menu bar in text editor
Sets the number of spaces a tab ==
changing the setting will change the hole script
6. Added Auto indent
when you hit enter it goes to the next line at the same
tab number and the line above it ( needs more testing and input)
Since color is stored RGB only in Blender, the conversion from and to HSV
causes values to be clipped all the time.
Solution found is adding a persistant hsv storage to the uiBut struct, and
have it working on that only while hsv button is open. Still, after usage
(leaving picker) the conversion will change values to rgb.
Also added; redraw event for editing buttons, to show correct changed
color while using nkey picker
When you PAD-enter on a popup-number button (like for add circle) it
accidentally de/increased the value before assigning an "OK". Fixed.
Also: restored functionality that allows to use Enter keys as a mouse
button click. This de/increases values now, opens menus, etc. Not in
pupup or pulldown menus though!
Made extrude along normals more sane. Now behave like a move along an arbitrary axis (including Ctrl/Shift applications and typemode). Also prints "Along faces normal" in the header, to tell the user what's happening.
- Rename!
CTRL+leftmouse click on name, makes it a text button. Works for all items as
currently being displayed.
Most work was doing the Bones, which is a nightmare :) But it uses same
code as buttons in Armature-Editmode now, without even needing EditMode :)
When renaming a bone, the Outliner makes the Object active though.
- PageUp / PageDown keys
Do what you expect.
As a means to indicate items in the Outliner to do operations on, you can
select with RMB items. Works like FileSelect here. Since selection in
Outliner is only on outliner level, no further UI updates happen. That is
reserved for LMB actions.
Implemented right now are only few operations... they can be called up with
the WKEY (the famous spare key :)
- if objects selected, a menu appears with choices
- if materials or textures selected, a meny appears to unlink them
If you make mixed or confusing selections you get a warning message.
TODO: add selection color in theme, and of course more operations.
- added Images in overview
- added Scripts in overview, if clicked it makes it active in open Text
Window
- Padplus/Padminus keys now open one level deeper or less
- fix: Akey didn't really open all...
- fix: click on item of non-active scene, activates new scene
- Added in pulldown the current view commands, including the 'show
hierachy' option, which shows only the full object tree
- You now can activate data by clicking on the hidden icons (displayed in
a row of a collapsed item)
- Added selection and display of active NLA strips
- Cleanup; white text in outliner only for active object
- Made hierachy helplines 1 pixel wide and black, looks nicer
- Made visualization of object hierarchy more clear with lines; this
solves the sometimes confusing mix of 'children objects' and
'linked data'.
- Enter editmode on click, also shows editing context buttons
- SHIFT+click on a item closes/opens all below that item
- Added constraints and Hooks (watch fun icon!)
Note; global undo doesnt restore former view for outliner... it does not
save the GUI, remember? :)
(i tried sort 'by type', but thats very unclear... need think over)
- Vertex Groups are visualized in Outliner (and selectable)
- Armature Bones are visualized & editable too
In general; Outliner now also supports indirect data (Structs with no ID)
- changed weirdo NLA icon into something that makes sense. (Thnx sten!)
- enter/exit posemode now updates outliner view too
- New: outliner option "Show same type". Shows only object types as
current active one. Nice to browse all lamps, mballs, armatures, etc
The outliner is a hierarchical diagram displaying a list of data in Blender
and its dependencies. The 'databrowse' doesn't really show it, and Oops is
too chaotic still. And most of all, the former two don't offer much tools.
After discussions on irc, Matt came with this design proposal;
http://mke3.net/blender/interface/layout/outliner/
Which is closely followed for the implementation.
The current version only shows all 'library data' in Blender (objects,
meshes, ipos, etc) and not the 'direct data' such as vertex groups or NLA.
I decided to make it inside the Oopw window, as an option. You can find the
option in the "View" pulldown, or directly invoke it with ALT+SHIFT+F9
Here's a quick overview of the Outliner GUI:
- Header pulldown has options what it can show (Visible = in current layers)
- click on triangle arrow to open/close
- press AKEY to open/close all
- Leftmouse click on an item activates; and does based on type a couple of
extra things:
- activates a scene
- selects/activates the Object
- enters editmode (if clicked on Mesh, Curve, etc)
- shows the appropriate Shading buttons (Lamp, Material, Texture)
- sets the IpoWindow to the current IPO
- activates the Ipo-channel in an Action
- Selected and Active objects are drawn in its Theme selection color
- SHIFT+click on Object does extend-select
- Press DOTkey to get the current active data in center of view
TODO;
- rightmouse selection; for indicating operations like delete or duplicate
- showing more data types
- icon (re)design...
- lotsof options as described in Matts paper still...
If backbuffer is in use for selection codes, the system switches back to
frontbuffer drawing temporally. Is easier solution now.
Next commit; fix for new 'zbuffer clipped selection', which also doesnt
work after using a pulldown or popup menu.
----- Killed UI frontbuffer draw
The interface toolkit was drawing all live updates (while using menus/buttons)
in the frontbuffer. This isn't well supported cross-platform, so time to be
killed once. Now it uses *only* glReadPixels and glCopyPixels for frontbuffer
access.
Live updates or menus now are drawn in backbuffer always, and copied to
front when needed.
NOTE: it was tested, but needs thorough review! On PC systems I suspects
backbuffer selection to screw up (check!). On SGI/SUN workstations it
should work smooth; but I need evidence
----- Smaller fixes;
- AA fonts were garbled on ATI systems. Now the AA fonts are drawn exact
on pixel positions. Needs the new FTGL libb too, patch is on maillist
- Rounded theme uses antialiased outlines
- Pulldown and popup menus have nice softshadow now
- New button type 'PULLDOWN', thats the one that callsup a pulldown menu.
Should be added to themes, as is the full menu/pulldown drawing
- Screendump for 1 window does the full window now, including header
- Empty pulldowns (for example running blender without scripts) give no
drawing error anymore
For review & fun;
- added curved lines as connectors, for Oops window
Meaning menus come back to previous selection almost always. Also fixed
annoying bug that caused Mirror menu (M in editmode) to start at 2nd item
- New hotkey (test :) CTRL+TAB in editmode gives (and shows!) current
selectmode. I prefer this over cycling, since the menu is informing you
what happens.
- To enforce pupmenus to start at specific item, use pupmenu_set_active()
- pupmenu_col() to be done
actually, adding vertices and edges to displist.
Now the subsurfer gives editvertices a pointer to the subsurfed vertex
location; allowing not only vertices in 'optimal' draw to show correct, but
also gives proper handling of borderselect and lasso for edges. :)
Is committed now for further test;
What works:
- Hold CTRL while leftmouse-draw (gesture) for lasso-select
- Hold also SHIFT for lasso-deselect
- In Object mode it only selects on object centers now
- In Mesh edit mode it works on same level as borderselect
Not:
- other editmodes or objects in general
Also fixed crash with circle-selecting outside of window edge.
Also put back wire-extra draw for curves (previous trial broke mball wire)
Turned borderselect, circle, lasso into dashed lines for visual language.
- edges now sample on three locationsm gives more hits
- own version of glPolygonOffset remains cumbersome... but for select
now the selection routine gets more offset than draw.
- first attempt to clean drawobject.c and displists
- generic call for draw object in backbuf for select purposes, cleans up
a lot in the other calls.
- also to verify if we can (in future) use this for vertex/edge/face
select, but the whole drawobject code works against me... this is
for another refactory (incl. displist) and out of the focus for now
- subsurf.c: now creates new faces in order of original. Not used yet, but is
handy to recover the original order for selection/paint purposes.
- vertex hidden, always means edge is hidden too
- edge hidden, always means face is hidden too
- face hidden, only means face hides
This means, that in face mode you can hide a face, whilst in edge mode
the edges will still display.
Please note, that when you have no edges saved in a Mesh, it also doesnt
store the hide flags for it, causing in/out editmode too reset hidden
edges.
- Zbuffer clipped selection
Based on same algos as for drawing (blender polygon offset) vertices, edges
and faces now are clipped for draw and selection when Zbuffer is used.
Note that it works for endpoint vertices of edges, and for facecenters.
Also works for border and circle-select
- Optimal draw subsurfs
This now draws optimal with faces and edges selected/unselected, hiding the
original 'cage' (mesh) completely.
TODO: edge select, which still uses original (invisible) edge.
http://www.blender3d.org/cms/Mesh_editing_rewrite.425.0.html
- circle-select now works
- delete options for edge/face select work as to be expected.
should check on a better set of choices in menu though
- assign material / select material options work for new modes
- shift+f fill didnt leave proper select flags...
- border select on face-gones (fgons) works
- 'draw normals' and fgons works now
Just select a bunch of faces (selection should be valid flat poly) and
press FKEY. Works in fact as selection-group optimizing. Nice in solid
drawmode!
Further some small additional fixes in the whole debugging process.
Found old error in loopselect for triangles, subdivision code, and
selection still.
NOTE: subdivide still works on vertex level only.
- hide flags now save correctly in mesh, to restore after going in/out
editmode
- after an extrude, faces/edges could have wrong select flags
(only in vertex select mode)
- new rule for addfacelist(); this now copies edges too, if an example
is provided. That prevents a lot of awkward code, still testing if it
goes as desired though...
The changelog is very long... it's on the web too:
http://www.blender3d.org/cms/Mesh_editing_rewrite.425.0.html
EditMesh refactor notes (user)
**** New selection modes
When entering Edit Mode for a Mesh, you now have the choice for three selection modes. These are shown as icons in the 3D header (hotkey is being searched for!).
- Vertex Select
Select vertices as usual, fully compatible with how previous version work
- Edge Select
Vertices are not drawn anymore, and selections happen by default on the edges. It is a true edge select, meaning that you can select three out of four edges in a face, without automatic having the 4th edge selected.
- Face Select
Instead of vertices, now selection 'points' are drawn in the face centers. Selected faces also get a colored outline, like for edges. This also is true face select, for each face individual regardless selection status of its vertices or edges.
While holding SHIFT, and press a selection mode, you can also combine the above choices. Now selection becomes mixed, and will behave as expected.
For example; in Edge+Face select mode, selecting the 4 edges of a face will select the face too.
The selection modes and optional drawing modes (like transparant faces, normals, or solid drawing) all work together. All of Blender's mesh editing tools now react to the correct selection mode as well.
Most noticeable it's in:
**** Extrude
Extruding in Edge or Face Select mode allows much more precise control over what's extruded and what should be excluded. Try for example a checker pattern selection, and extrude it.
New is the fixed translation when faces are extruded. This always follows the (averaged) face normal(s) of the old face(s), enabling much easier working in 3D views . A single 'G' (Grab) or 'R' (Rotate) or 'S' (Scale) will change transform modus as usual.
**** Other things to note
- Hiding edges/faces will also behave different based on Select Mode.
- while editing, normals of faces are updated always now
- Border select (BKEY) has 2 different rules for edges; when one edge is fully inside of the border, it will only select edges that are fully inside. Otherwise it selects each edge intersecting with the border.
- in face mode, adding vertices, edges or a circle is invisible...
- "Add monkey" now works as a normal primitive (rotated and on 3d cursor)
- Mesh undo was fully recoded, hopefully solving issues now with Vertex Keys and Groups
- Going in and out of editmode was fully recoded. Especially on larger models you'll notice substantial speed gain.
**** Todo
Add 'FaceSelect mode' functionality in EditMode, including zbuffered selection, display and editing of UV texture.
EditMesh refactor notes (coder)
**** Usage of flags in general
The "->f" flags are reserved for the editmesh.c and editmesh_lib.c core functions. Actually only selection status is there now.
The "->f1" and "->f2" flags are free to use. They're available in vertex/edge/face structs. Since they're free, check carefully when calling other functions that use these flags... for example extrude() or subdivide() use them.
**** Selection flags
EditVert: eve->f & SELECT
EditEdge: eed->f & SELECT
EditFace: efa->f & SELECT
- Selection is only possible when not-hidden!
- Selection flags are always up-to-date, BUT:
if selection mode >= SELECT_EDGE vertex selection flags can be incorrect
if selection mode == SELECT_FACE vertex/edge selection flags can be incorrect
This because of shared vertices or edges.
- use for selecting vertices:
eve->f &= SELECT
- use for selecting edges always:
void EM_select_edge(eed, 1) // 1 = select, 0 = deselect
- use for selecting faces always:
void EM_select_face(efa, 1) // 1 = select, 0 = deselect
- To set the 'f' flags in all of the data:
void EM_set_flag_all(int flag);
void EM_clear_flag_all(int flag);
- the old faceselectedOR() and faceselectedAND() are still there, but only
to be used for evaluating its vertices
**** Code hints for handling selection
If the selectmode is 'face'; vertex or edge selections need to be flushed upward. Same is true for 'edge' selection mode. This means that you'll have to keep track of all selections while coding... selecting the four vertices in a face doesn't automatically select the face anymore.
However, by using the above calls, at least selections flush downward (to vertex level). You then can call:
void EM_selectmode_flush(void);
Which flushes selections back upward, based on the selectmode setting. This function does the following:
- if selectmode 'vertex': select edges/faces based on its selected vertices
- if selectmode 'edge': select faces based its selected edges
This works fine in nice controlled situations.
However, only changing the vertex selections then still doesn't select a face in face mode! If you really can't avoid only working with vertex selections, you can use this call:
void EM_select_flush(void);
Now selection is flushed upward regardless current selectmode. That can be destructive for special cases however, like checkerboard selected faces. So use this only when you know everything else was deselected (or deselect it). Example: adding primitives.
**** Hide flags
EditVert: eve->h
EditEdge: eed->h
EditFace: efa->h
- all hide flags are always up-to-date
- hidden vertices/edges/faces are always deselected. so when you operate on selection only, there's no need to check for hide flag.
**** Unified undo for editmode
New file: editmode_undo.h
A pretty nice function pointer handler style undo. Just code three functions, and your undo will fly! The c file has a good reference.
Also note that the old undo system has been replaced. It currently uses minimal dependencies on Meshes themselves (no abuse of going in/out editmode), and is restricted nicely to editmode functions.
**** Going in/out editmode
As speedup now all vertices/faces/edges are allocated in three big chunks. In vertices/faces/edges now tags are set to denote such data cannot be freed.
ALso the hashtable (lookup) for edges uses no mallocs at all anymore, but is part of the EditEdge itself.
