This patch renames the node "String Substring" to "Slice String"
to conform to the "verb first" naming convention.
Default length is also changed to 10 to make it easier for users
to understand what the node does.
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12931
* Open File Browser when pressing "Add Asset Library". This just makes sense,
since users have to select a directory for the asset library anyway.
* Move '+' icon back to the right side of the box. Then it is right under the
'x' icons for each indivdual library, which seems like the more natural
place.
* Correct tooltip for the "Add Asset Library" operator.
* Mark empty asset library name or paths field in red, to make clear that these
need to be set.
This node takes a geometry set with instances as input and outputs
points located on the origins of the top level of instances in the
geometry set (not nested instances). It also has position and radius
inputs to allow overriding the default, and a selection input to only
generate points for some instances.
The use case for this node is a method to use geometry proximity on
instance origins, but in a more generic way that is flexible and useful
in other situations.
Differential Revision: https://developer.blender.org/D12893
Fixes several notable mistakes and missing information
regarding the API documentation (*.rst).
This will allow API stub generators like bpystubgen or
fake-bpy-module to produce more accurate result.
Differential Revision: https://developer.blender.org/D12639
Adds a filter popup to the header that allows specifiying which data-block
types to show. The menu automatically reflects all supported ID types, so it
shows a checkbox for materials, worlds and actions currently by default, and
all ID types with the "Extended Asset Browser" experimental feature enabled.
The checkboxes integrate better with the surrounding layout and are not that
attention grabbing. To my knowledge the only reason not to use checkboxes was
so the icons could be displayed. But this does it just like the Outliner filter
settings: Show the icon before the checkbox.
Also widen the popover a bit to fit longer labels (didn't fit before this patch
even).
These nodes just output a single value of their respective types,
making it possible to control multiple inputs with the same value.
Differential Revision: https://developer.blender.org/D12932
Camera, lattice and speaker object types were missing there own proper
`USER_DUP_` flags, leading to not properly handling duplication of their
object data.
NOTE: We could probably simply opions here, by using categories (like
'GEOMETRY', 'SHADING', etc.) instead of exact object types. But this is
beyond bugfix scope.
Updates UI code so that we can enable the asset UI for specific data-block
types by default, i.e. irrespective of the "Extended Asset Browser"
experimental feature.
"Mark as Asset" and "Clear Asset" are always visible in the Outliner context
menu now, but are grayed out if not applicable and show a disabled hint in the
tooltip.
A known side-effect of this: The "Mark as Asset" and "Clear Asset" operators
are enabled for action data-blocks now, even though only pose actions created
through the Pose Libraries add-on are supported. If this is something worth
addressing is being discussed still.
Differential Revision: https://developer.blender.org/D12955
Reviewed by: Sybren Stüvel
This patch includes code from D9891 and D12754, so credit goes to Juanfran and Dalai.
I updated the patches to work with `master` and with the new overlay toggle.
The reason to include both changes as part of one patch is that the dimmed dashed lines work much better together with colored wires.
Theme setting for dash opacity:
{F11370574, size=full}
{F11286177, size=full, autoplay, loop}
{F11149912, size=full}
For adding the overlay I used `SpaceImageOverlay` as reference, although I'm not familiar with this code so there might be mistakes.
Reviewed By: #user_interface, HooglyBoogly
Differential Revision: https://developer.blender.org/D12886
Show the scaled down tool icon when the tool region is collapsed. Show a
blank space when the tool region is visible.
* Minimize the UI flickering when changing the active tool.
* Show the active tool when the tool region is collapsed.
* Smaler header footprint (the tool name is not visible).
This is a follow up for T91536.
Differential Revision: https://developer.blender.org/D12939
Since 2D cursor will be used rarely in VSE and it is adding visual
noise, it will be hidden by default.
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D12933
For some reason the Annotate tool has an extra padding when compared to
other tools. This makes the UI to flicker a bit (specially with D12939
applied).
Differential Revision: https://developer.blender.org/D12943
This commit adds an updated version of the curve to points that
supports fields. Only the position and radius are transferred
by default now, which should improve performance. The other outputs
like tangent and rotation are outputted with anonymous attributes.
I took the opportunity to change a few other small things:
- Name geometry sockets "Curve" and "Points" like other nodes.
- Remove the radius multiple of 0.1, which was confusing.
Thanks to @Johnny Matthews (guitargeek) for an initial patch.
Differential Revision: https://developer.blender.org/D12887
Caused by the Cycles-X merge.
The old style of tile rendering was removed, leaving the script to error
out trying to set the tile size.
Tile rendering came back in a new form (but only really relevant for
large resolution rendering), so now leave setting auto_tile & tile_size
alone (since previews are rendered at PREVIEW_RENDER_DEFAULT_HEIGHT 128
-- which should never make a difference here).
Maniphest Tasks: T91808
Differential Revision: https://developer.blender.org/D12937
* Show asset path in a (read only) text button. Makes it possible to see the
full path in the tooltip, brings support for copying the path and integrates
better with the sourrounding layout. Previous label needed lots of space to
show the full path without clipping.
* Remove "Details" panel, it only contained one item (description). That is
moved next to the name and asset path button.
* Use property split layout for name source and description buttons. Now that
there are multiple buttons, it's better to have a label for them.
* Always show operators for asset previews, just gray them out if not
applicable instead of hiding. Keeps the layout consistent and graying out is
less confusing than hiding UI elements.
This commit adds a node that can be used to find and replace strings
inside of the input string. One initial use case is to have an easier
way to add line breaks to strings to the string to curves node.
Differential Revision: https://developer.blender.org/D12721
This patch includes an updated version of the raycast node that uses
fields instead of attributes for inputs instead of outputs. This makes
the node's UI much clearer. It should be faster too, since the
evaluation system for fields provides multi-threading.
The source position replaces the input geometry (since this node is
evaluated in the context of a geometry like the other field nodes).
Thanks to @guitargeek for an initial version of this patch.
Differential Revision: https://developer.blender.org/D12638
Adds a button, Update All Paths, to the Motion Paths property tabs and
will always show. The operator goes through all visible objects and
updates their motion paths.
The current implementation has a subtle functional change. Calculating
or updating motion paths for armature objects (through the Object tab,
not Armature tab) now also updates the paths for its bones. We could
preserve the old behavior but it doesn't seem necessary. It seems more
likely that the animator wants to update both anyways.
Reviewed by: sybren
Maniphest Tasks: T83068
Differential Revision: https://developer.blender.org/D11667
The Endpoint Selection node allows for the Selection of an aribitrary
number of endpoints from each spline in a curve. The start and end
inputs are evaluated on the spline domain. The result is outputted
as a boolean field on the point domain.
Differential Revision: https://developer.blender.org/D12846
- Rename RNA SpaceSeq.show_strip_overlay to show_overlays
matching the 3D View, the term "strip" was misleading as this is used
for the preview as well.
- Rename various RNA overlay settings to overlay_frame
since "Frame Offset" is a specific feature, avoid having both
Editor.show_overlay and SpaceSeq.show_overlays.
- Rename Editing `over_*` -> `overlay_frame_*` in DNA,
as well as flags.
Back in Blender 2.30, the GUI project brought panels into Blender among other important visual updates.
For the first time it was possible to move the wall of buttons around. Providing a clear separation
between sections (it even allowed the grouping of panels in tabs!)
During the 2.5 redesign, the separation between panels became a line on top of each panel, and panels received
theme settings for background and header colors. The default theme used the same color for both.
In 2.8 the background color of panels was different from headers in the default theme, so the separator
line was removed. While the separator line wasn't elegant (only on top, non-themeable, hard-coded emboss effect),
it provided a sort of separation between panels.
This patch solves the panels-separation by simply adding a margin space around them (not visible in default theme yet).
Even though the margin reduces the width of the working area slightly, it makes room for the upcoming always-visible scrollbars.
Other adjustments:
* Use arrow icon instead of triangle to collapse/expand
* Use rounded corners to match the rest of the UI (editor corners, nodes, etc).
{F10953929, size=full}
Margin on panels makes use of the `style->panelouter` property that hasn't been
used in a while. Also slight tweaks to `boxspace` and `templatespace` style properties so they
are multiples of 2 and operations on them round better.
There is technically no need to update the themes for them to work, so no theme changes are included in this patch.
{F10953931, size=full}
{F10953933, size=full}
{F10953934, size=full}
{F10954003, size=full}
----
A new theme setting under Style controls the roundness of all panels (added it to Style instead of ThemeSpace because I think controlling the panel roundness per editor is a bit overkill):
{F11091561, size=full, autoplay, loop}
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D12814
Tools currently used by VSE don't have much useful settings, but they
use a lot of space. Therefore these headers will be hidden by default.
Property `show_region_tool_header` was added to view menu to enable tool
settings.
This could be resolved by region overlap, but it isn't working well
currently.
Differential Revision: https://developer.blender.org/D12875
Replaces the old Subdivision Surface Node.
Changes:
- Removes implicit instance realization, instead the node runs once
per unique instance.
- "Use Creases" becomes a crease field input applied to edges.
The values are clamped between zero and one.
Addresses T91763
Differential Revision: https://developer.blender.org/D12830
This commit adds an updated version of the old attribute transfer node.
It works like a function node, so it works in the context of a
geometry, with a simple data output.
The "Nearest" mode finds the nearest element of the specified domain on
the target geometry and copies the value directly from the target input.
The "Nearest Face Interpolated" finds the nearest point on anywhere on
the surface of the target mesh and linearly interpolates the value on
the target from the face's corners.
The node also has a new "Index" mode, which can pick data from specific
indices on the target geometry. The implicit default is to do a simple
copy from the target geometry, but any indices could be used. It is also
possible to use a single value for the index to to retrieve a single
value from an attribute at a certain index.
Differential Revision: https://developer.blender.org/D12785
This menu doesn't have an effect on the importing while in the "Current File"
asset library. This can be quite confusing.
However, just hiding the menu may be a temporary solution. Decision
actually to instead show a different menu, that allows choosing between
duplicating and reusing data on drop. This is being reviewed here
https://developer.blender.org/D12879.
Meanwhile (or in case we end up rejecting that), this change should
avoid some confusion.
Differential Revision: https://developer.blender.org/D12752
There were several places attempting to check to see if scene lights
and world were enabled for display. This tries to find a common place
for both of these to reduce duplication.
Honestly, I couldn't find a really good spot for these and settled on
DRW_engine. It's not the best spot since they're not strictly drawing
related, but let's start here.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D12658
In editors with vertical scale indicators, such as Graph Editor,
Drivers, or VSE, display the values aligned to the view.
Also add a shadow (similar to the 3D View info) to improve readability when the text is on top of curves, strips, or other content.
{F10987240, size=full}
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D12809
This commit adds a fields version of the mesh to curve node, with a
field for the input selection. In order to reduce code duplication,
it adds the mesh to curve conversion to the new geometry module
and calls that implementation from both places.
More details on the geometry module can be found here: T86869
Differential Revision: https://developer.blender.org/D12579
Currently `PoseBone.children` is implemented by a linear scan of
the list of armature bones. This is doubly inefficient, since
not only is it scanning all bones, the `obj.data.bones` list
is actually synthetic and generated from Bone children lists.
Instead, use the `Bone.children` native RNA property.
Differential Revision: https://developer.blender.org/D12727
