The `create_liquid_geometry` still used the older attributes
API to write the velocities.
This replaces the use of `BKE_attribute_new` with
the newer attribute API.
No functional changes expected.
Pull Request: https://projects.blender.org/blender/blender/pulls/123854
The attribute API defined in `attribute.cc` was dependent on
the assumption that `ID`s are always the "direct" owners of attributes.
For Grease Pencil drawings, this is not the case. The Grease Pencil ID
stores the attributes for layers, and the attributes for drawings are stored
in `CurvesGeometry` on the drawings themselves.
In order to make use of `rna_attribute.cc`, we need that API to handle
other types of attribute owners.
This adds an `AttributeOwner` which is basically just a type and a
pointer. We replace the `ID` pointers and pass `AttributeOwner`s instead.
For cases where we have to do a switch based on the type, all the
types are handled and the `default` statment is left out. This ensures
that we get a compiler warning when a new `AttributeOwnerType`
is added.
No functional changes expected.
Pull Request: https://projects.blender.org/blender/blender/pulls/122765
The `object_to_world` and `world_to_object` matrices are set during
depsgraph evaluation, calculated from the object's animated location,
rotation, scale, parenting, and constraints. It's confusing and
unnecessary to store them with the original data in DNA.
This commit moves them to `ObjectRuntime` and moves the matrices to
use the C++ `float4x4` type, giving the potential for simplified code
using the C++ abstractions. The matrices are accessible with functions
on `Object` directly since they are used so commonly. Though for write
access, directly using the runtime struct is necessary.
The inverse `world_to_object` matrix is often calculated before it's
used, even though it's calculated as part of depsgraph evaluation.
Long term we might not want to store this in `ObjectRuntime` at all,
and just calculate it on demand. Or at least we should remove the
redundant calculations. That should be done separately though.
Pull Request: https://projects.blender.org/blender/blender/pulls/118210
Caused by e968b4197b / 67e23b4b29
Since culprit commits, we are not running `MANTA::initGuiding` /
`fluid_alloc_guiding` if guiding is meant to be pulled from other
domains (it does work with effectors though). This is because atm. only
the `FLUID_DOMAIN_ACTIVE_GUIDE` flag sets `mUsingGuiding` to true
(activated in `update_obstacleflags`, so only for effectors).
So to fix this, we have to ensure that `MANTA::initGuiding` runs (also
if guiding is pulled from domains), but also make sure we dont run into
the crashes from T102257.
It seems that the real reason we were getting crashes in T102257 is that
67e23b4b29 made it so that resetting the cache (including a call to
`fluid_modifier_reset_ex`) in `fluid_modifier_processDomain` happens
**after** `FluidDomainSettings.active_fields` have been updated (this
happens in `update_flowsflags` & `update_obstacleflags`).
But `fluid_modifier_reset_ex` also resets
`FluidDomainSettings.active_fields`. If we then update pointers later in
`fluid_modifier_processDomain`, we never get anything in the guiding
related pointers for the new `mCurrentID` (specifically `mPhiGuideIn`
will be a nullptr). This is the real reason `initGuiding()` runs a
second time (it does once for `fluid_modifier_init` then again as a
consequence of the call to `manta_guiding`).
This patch proposes to move the resetting process from 67e23b4b29
**above** the refreshing of the `FluidDomainSettings.active_fields`,
this way these field stay intact, we do get the first run of
`initGuiding()` from `fluid_modifier_init`, manta pointers get updated
with intact fields afterwards (so we then get a valid `mPhiGuideIn`),
which then prevents the second run from `manta_guiding` to actually call
the python script again.
The fix from e968b4197b is then not needed and reverted in this patch.
This should be good for LTS I think.
Pull Request: https://projects.blender.org/blender/blender/pulls/117067
Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
Each value is now out of the global namespace, so they can be shorter
and easier to read. Most of this commit just adds the necessary casting
and namespace specification. `enum class` can be forward declared since
it has a specified size. We will make use of that in the next commit.
Use the standard "elements_num" naming, and use the "corner" name rather
than the old "loop" name: `verts_num`, `edges_num`, and `corners_num`.
This matches the existing `faces_num` field which was already renamed.
Pull Request: https://projects.blender.org/blender/blender/pulls/116350
Make the naming consistent with the recent change from "loop" to
"corner". Avoid the need for a special type for these triangles by
conveying the semantics in the naming instead.
- `looptris` -> `corner_tris`
- `lt` -> `tri` (or `corner_tri` when there is less context)
- `looptri_index` -> `tri_index` (or `corner_tri_index`)
- `lt->tri[0]` -> `tri[0]`
- `Span<MLoopTri>` -> `Span<int3>`
- `looptri_faces` -> `tri_faces` (or `corner_tri_faces`)
If we followed the naming pattern of "corner_verts" and "edge_verts"
exactly, we'd probably use "tri_corners" instead. But that sounds much
worse and less intuitive to me.
I've found that by using standard vector types for this sort of data,
the commonalities with other areas become much clearer, and code ends
up being naturally more data oriented. Besides that, the consistency
is nice, and we get to mostly remove use of `DNA_meshdata_types.h`.
Pull Request: https://projects.blender.org/blender/blender/pulls/116238
The term `looptri` was used ambiguously for both single & arrays.
The term `tri` was also used, causing `tri->tri`.
Use terms:
- `looptris` for an array or when dealing with multiple items.
- `looptri` is used when dealing with a single item.
- `lt` for a single MLoopTri variables & arguments.
This was already a convention but not followed closely.
"mesh" reads much better than "me" since "me" is a different word.
There's no reason to avoid using two more characters here. Replacing
all of these at once is better than encountering it repeatedly and
doing the same change bit by bit.
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
Using ClangBuildAnalyzer on the whole Blender build, it was pointing
out that BLI_math.h is the heaviest "header hub" (i.e. non tiny file
that is included a lot).
However, there's very little (actually zero) source files in Blender
that need "all the math" (base, colors, vectors, matrices,
quaternions, intersection, interpolation, statistics, solvers and
time). A common use case is source files needing just vectors, or
just vectors & matrices, or just colors etc. Actually, 181 files
were including the whole math thing without needing it at all.
This change removes BLI_math.h completely, and instead in all the
places that need it, includes BLI_math_vector.h or BLI_math_color.h
and so on.
Change from that:
- BLI_math_color.h was included 1399 times -> now 408 (took 114.0sec
to parse -> now 36.3sec)
- BLI_simd.h 1403 -> 418 (109.7sec -> 34.9sec).
Full rebuild of Blender (Apple M1, Xcode, RelWithDebInfo) is not
affected much (342sec -> 334sec). Most of benefit would be when
someone's changing BLI_simd.h or BLI_math_color.h or similar files,
that now there's 3x fewer files result in a recompile.
Pull Request #110944
Implements the rest of #101689, after 5e9ea9243b.
- `vdata` -> `vert_data`
- `edata` -> `edge_data`
- `pdata` -> `face_data`
- `ldata` -> `loop_data`
A deeper rename of `loop` to `corner` will be proposed as a next
step, and renaming `totvert` and `totedge` can be done separately.
Pull Request: https://projects.blender.org/blender/blender/pulls/110432
Implements part of #101689.
The "poly" name was chosen to distinguish the `MLoop` + `MPoly`
combination from the `MFace` struct it replaced. Those two structures
persisted together for a long time, but nowadays `MPoly` is gone, and
`MFace` is only used in some legacy code like the particle system.
To avoid unnecessarily using a different term, increase consistency
with the UI and with BMesh, and generally make code a bit easier to
read, this commit replaces the `poly` term with `poly`. Most variables
that use the term are renamed too. `Mesh.totface` and `Mesh.fdata` now
have a `_legacy` suffix to reduce confusion. In a next step, `pdata`
can be renamed to `face_data` as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/109819
* Provide render data, node tree and color management directly instead
of going through scene, as these may be modified by the render pipeline.
Also better for cached texture hits this way.
* Change legacy pass type to pass name.
* Skip file output node when not doing final render.
* Gracefully handle incomplete render results.
Pull Request: https://projects.blender.org/blender/blender/pulls/108629
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
Implicit sharing means attribute ownership is shared between geometry
data-blocks, and the sharing happens automatically. So it's unnecessary
to choose whether to enable it when copying a mesh.
The typical order is vertex, edge, face(polygon), corner(loop), but in
these three functions polys and loops were reversed. Also use more
typical "num" variable names rather than "len"
Add the ability to retrieve implicit sharing info directly from the
C++ attribute API, which simplifies memory usage and performance
optimizations making use of it. This commit uses the additions to
the API to avoid copies in a few places:
- The "rest_position" attribute in the mesh modifier stack
- Instance on Points node
- Instances to points node
- Mesh to points node
- Points to vertices node
Many files are affected because in order to include the new information
in the API's returned data, I had to switch a bunch of types from
`VArray` to `AttributeReader`. This generally makes sense anyway, since
it allows retrieving the domain, which wasn't possible before in some
cases. I overloaded the `*` deference operator for some syntactic sugar
to avoid the (very ugly) `.varray` that would be necessary otherwise.
Pull Request: https://projects.blender.org/blender/blender/pulls/107059
