Add an API for armature layer access. Instead of accessing `arm->layer`
and friends directly, the code now uses this API. This will make things
easier to replace by bone collections in the future.
The functions are named "bonecoll" (short for "bone collection"), as
that's the soon-to-be-introduced replacement for armature layers. This
API is the first step towards that replacement, and should help to
reduce the changes necessary when functional changes are committed.
This also creates a new module `source/blender/animrig` for Animation &
Rigging code. This will, for example, house the bone collection system
in the near future.
There is a bunch of code currently spread across blenkernel and editors
in a rather ad-hoc way; it is intended that at some point that code gets
moved into `animrig` as well (or at least the subset of that code where
such a move makes sense; brain still required).
Ref: #108941
No functional changes.
Eventually this will need to be updated for the new Sheen in general,
but we should probably wait with that until all breaking changes for
the Principled BSDF are done.
Implements the rest of #101689, after 5e9ea9243b.
- `vdata` -> `vert_data`
- `edata` -> `edge_data`
- `pdata` -> `face_data`
- `ldata` -> `loop_data`
A deeper rename of `loop` to `corner` will be proposed as a next
step, and renaming `totvert` and `totedge` can be done separately.
Pull Request: https://projects.blender.org/blender/blender/pulls/110432
The cleanup of blenkernel last weeks , caused the house of cards to
collapse on top of bf_gpu's shader_builder, which is off by default
but used on a daily basis by the rendering team.
Given the fixes forward in #110394 ran into a ODR violation in OSL that
was hiding there for years, I don't see another way forward without
impeding the rendering teams productivity for "quite a while" as there
is no guarantee the OSL issue would be the end of it.
the only way forward appears to be back.
this reverts :
19422044eda670b53abe0f541db97cbe516e8c813e88a2f44c4e64b772f59547e7a31707fe6c5a57
The problematic commit was 07fe6c5a57
as blenkernel links most of blender, it's a bit of a link order issue
magnet. Given all these commits stack, it's near impossible to revert
just that one without spending a significant amount of time resolving
merge conflicts. 99% of that work was automated, so easier to just
revert all of them, and re-do the work, than it is to deal with the
merge conflicts.
Pull Request: https://projects.blender.org/blender/blender/pulls/110438
Implements part of #101689.
The "poly" name was chosen to distinguish the `MLoop` + `MPoly`
combination from the `MFace` struct it replaced. Those two structures
persisted together for a long time, but nowadays `MPoly` is gone, and
`MFace` is only used in some legacy code like the particle system.
To avoid unnecessarily using a different term, increase consistency
with the UI and with BMesh, and generally make code a bit easier to
read, this commit replaces the `poly` term with `poly`. Most variables
that use the term are renamed too. `Mesh.totface` and `Mesh.fdata` now
have a `_legacy` suffix to reduce confusion. In a next step, `pdata`
can be renamed to `face_data` as well.
Pull Request: https://projects.blender.org/blender/blender/pulls/109819
bf_usd is a bit slow to build, and most time is spend on the front end
of the compiler parsing USD's headers.
this change enables pre-compiled headers for the most expensive
headers to parse.
When building `bf_usd` single threaded with -j1 (for accurate measurements)
```
before Wall time: 0h 4min 30sec 931 ms 504299 ns
after Wall time: 0h 0min 50sec 808 ms 24399 ns
```
Pull Request: https://projects.blender.org/blender/blender/pulls/110027
Allow SVG files to have previews in the File Browser. Adds
nanosvgrast.h to extern\nanosvg\, which is an SVG rasterizer that is
an optional part of the nanosvg source.
Pull Request: https://projects.blender.org/blender/blender/pulls/109567
This formats code that is disabled using `#if 0`. Formatting was achieved
by temporarily changing `#if 0` to `#if 1 /*something*/`, then formatting,
and then changing it back to `#if 0`.
There's quite a few libraries that depend on dna_type_offsets.h
but had gotten to it by just adding the folder that contains it to
their includes INC section without declaring a dependency to
bf_dna in the LIB section.
which occasionally lead to the lib building before bf_dna and the
header being missing, while this generally gets fixed in CMake by
adding bf_dna to the LIB section of the lib, however until last
week all libraries in the LIB section were linked as INTERFACE so
adding it in there did not resolve the build issue.
To make things still build, we sprinkled add_dependencies wherever
we needed it to force a build order.
This diff :
Declares public include folders for the bf_dna target so there's
no more fudging the INC section required to get to them.
Removes all dna related paths from the INC section for all
libraries.
Adds an alias target bf:dna to signify it has been updated to
modern cmake
Declares a dependency on bf::dna for all libraries that require it
Removes (almost) all calls to add_dependencies for bf_dna
Future work:
Because of the manual dependency management that was done, there is
now some "clutter" with libs depending on bf_dna that realistically
don't. Example bf_intern_opencolorio itself has no dependency on
bf_dna at all, doesn't need it, doesn't use it. However the
dna include folder had been added to it in the past since bf_blenlib
uses dna headers in some of its public headers and
bf_intern_opencolorio does use those blenlib headers.
Given bf_blenlib now correctly declares the dependency on bf_dna
as public bf_intern_opencolorio will get the dna header directory
automatically from CMake, hence some cleanup could be done for
bf_intern_opencolorio
Because 99% of the changes in this diff have been automated, this diff
does not seek to address these issues as there is no easy way to
determine why a certain dependency is in place. A developer will have
to make a pass a this at some later point in time. As I'd rather not
mix automated and manual labour.
There are a few libraries that could not be automatically processed
(ie bf_blendthumb) that also will need this manual look-over.
Pull Request: https://projects.blender.org/blender/blender/pulls/109835
Also fix some incorrect usages of `N_` macro instead of `TIP_` one
(these error messages typically need to get translated explicitely, not
only marked for extraction).
The Alembic importer can optionnaly interpolate vertex and matrix data.
To detect if two samples can be interpolated `get_weight_and_index`
needs to be called which output the interpolation weight and the indices
for the floor and ceil samples separately. Either the weight or the
indices could be used to determine if interpolation was needed.
This adds a `SampleInterpolationSettings` structure to hold the weight
and indices together so we don't need to manage multiple local
variables, and replaces `get_weight_and_index` with
`get_sample_interpolation_settings` which returns either a
`SampleInterpolationSettings` or nothing if no interpolation is
necessary.
This also modifies `AbcMeshData` to have an optional
`SampleInterpolationSettings` and removes members used for interpolation
from `CDStreamConfig`, which simplifies the latter structure as well as
the check in `read_mverts` to verify if interpolation is needed.
`get_config` also no longer needs a parameter for setting the now removed
`use_vertex_interpolation` member from `CDStreamConfig`. This was only
used for Mesh vertex interpolation despite also being set in the points
reader (which does not yet support any interpolation).
No functional changes.
Pull Request: #109155
* Use pi factor to convert between radiant flux and intensity
* Mark lights as normalized on export
* Add spot light export support
* Add treatAsPoint support for import and export
* Empirically match normalized distant light
* Fix wrong unnormalized point/sphere/disk light unit in Cycles
Overall it should be much closer now for all light types. Point and distant
light units are inconsistent between renderers, so not possible to match
everything there.
Ref #109404
Pull Request: https://projects.blender.org/blender/blender/pulls/109795
String search & replace is a higher level function (unlike BLI_string.h)
which handlers lower level replacements for printing and string copying.
Also use BLI_string_* prefix (matching other utilities).
This makes it possible to use BLI_string in Blender's internal utilities
without depending on DynStr, MemArena... etc.
