Remove NURBS or Bezier specific attributes after removing points or
curves. In theory we could avoid copying those attributes in the
first place, but that doesn't seem worth the extra complexity here,
since we don't necessarily know the result curve type counts before
copying attributes.
`V2D_VIEWSYNC_AREA_VERTICAL` flag was mistakenly set to the sequencer
toolbar region instead of the channels region.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D16155
The instance attributes assignment operators were broken in multiple
ways: there wasn't a move constructor (probably causing performance
issues), and the destination attributes weren't freed before they
were replaced.
Attribute copying often uses identical logic for copying selected
elements or copying with an index map. Instead of reimplementing
this in each file, use the common implementation in the array_utils
namespace. This makes the commonality more obvious, gives improved
performance (this implementation is multithreaded), reduces binary
size (I observed a 173KB reduction), and probably reduces compile time.
Mistake in own rB358155a8da60, change ended up discarding the case where
we need to also delete IDs using a tagged-to-be-deleted ID in a 'never
NULL' way. Typical example: Whene deleting a Mesh ID, one also needs to
delete all the Objects using that mesh, since obdata pointer is of type
'never NULL'.
Note that luckily, this fix does not affect the performance improvements
from rB358155a8da60.
Noted by Brecht and Clement because of failing unittests, shame on me.
Oversight in rBf8b1483566cc which resulted in fonts/surfaces not having
their draw caches being tagged dirty.
Not only OB_CURVES_LEGACY have their object data of type ID_CU_LEGACY,
but also OB_SURF/OB_FONT objects.
Maniphest Tasks: T101922
Differential Revision: https://developer.blender.org/D16298
Add command line argument to switch gpu backend. Add `--gpu-backend` option to
override the gpu backend selected by Blender.
Values for this option that will be available in releases for now are:
* opengl: Force blender to select OpenGL backend.
During development and depending on compile options additional values can exist:
* metal: Force Blender to select Metal backend.
When this option isn't provided the internal logic for GPU backend selection will be used.
Note that this is at the time of writing the same as always selecting the opengl backend.
Reviewed By: fclem, brecht, MichaelPW
Differential Revision: https://developer.blender.org/D16297
During teleport event, gravity is disabled and WalkMethod
is stored in `teleport.navigation_mode` which is used later to reset
the status after execution. Calling teleport events consecutively
will change the initial WalkMethod value. So update it only on the
first call. Also remove `else condition` as it stops the previously running
teleport when the new teleport call fails to find a hit point.
Reviewed by: dfelinto, mano-wii
Differential Revision: https://developer.blender.org/D15574
The interface needs to bind the shaders for some parameter setup.
This program change wasn't reflected in the GPUContext.
This was then conflicting with the next shader bind if the next shader was
the same as the shader bound before the interface creation.
Setting the state to the correct shader ensures a rebind if needed.
Fix T101792 New hair curves do not render properly first time in EEVEE with motion blur enabled
Add the eModifierMode_Editmode to the required modes for curves modifier
evaluation. Only this way the modifier can be skipped in evaluation.
Maniphest Tasks: T101888
Differential Revision: https://developer.blender.org/D16280
Batch-delete by-passes a lot of ID usages handling in to-be-deleted IDs,
so usercount of deleted IDs needs to be manually reset to avoid the
annoying error messages in the console.
Simplify and optimize remapping handling in bacth ID deletion, by moving
it outside of the initial loop gathering all IDs to be deleted, and and
by using batch remapping code.
Speedup can be over 100 times faster in complex production scenes using
thousands of IDs, when e.g. deleting a whole library.
Examples before/after times on my machine (deleting two different libraries):
lib1: 5.55 sec/0.03 sec
lib2: 13.60 sec/0.13 sec
Found while investigating T101903.
Remapping in batch deletion could end up calling viewlayer resync code
on partially invalid BMain (some IDs still in Main using IDs removed
from Main).
Think this code can actually be further optimized, but this fix should
be safe enough for 3.3 (and potentially 2.93).
Thanks to Jeroen (@jbakker) for the initial investigation.
For consistency with other brush based (paint) systems we should add
these entries in the brushes context menu.
For this, expose the brushes `ob_mode` to RNA and show this (along with
the tool choice) to the appropriate menus.
Differential Revision: https://developer.blender.org/D16287
Currently harmless (since atm. it is not possible to trigger this part
of the code from curves sculpting), but in a future fix (for T101518), it
would be good to use `BKE_paint_init` (and having the correct ob_mode
for the brush would be nice).
Differential Revision: https://developer.blender.org/D16286
Skip BMesh conversion and read the selection attribute directly.
With a Ryzen 3700x, my test face of a simple 4 million face grid
became over 4000 times faster, from 2.6s to 0.6ms.
Caused by 21f2bacad9 which misunderstood the logic handling
shape keys in this function. The shape key on the original mesh in the
main data-base should be cleared if the "no-main" mesh doesn't have any
shape key layers and the vertex count has changed. The complexity is
necessary because shape keys are stored differently on original and
evaluated meshes.
Also change to "Warn" because this is expected behavior in some cases,
like when applying a geometry nodes modifier that creates a new mesh
from scratch.
String attributes are intentionally not fully supported in geometry nodes
yet because more design work is necessary to decide how they should behave.
For now just disable handling string attributes to avoid crashes.
`Brush` has two attributes for holding texture information (`MTex`).
One for color textures (`mtex`) and one for mask textures (`mask_mtex`).
Unfortunately sculpt mode due to reasons used `mtex` to store mask textures.
Changes like brush asset/paint mode require modes/tools to read the mask/color texture from
one place.
To start sanatizing this we isolate the attributes in functions.
`BKE_brush_color_texture_get` and `BKE_brush_mask_texture_get`. All object
paint modes should use these functions.
When the File (or Asset) Browser would display data-blocks without
previews in a heavy .blend file, there would be a drastic slowdown.
See patch for details and comparison videos.
Differential Revision: https://developer.blender.org/D16273
Reviewed by: Bastien Montagne
MTLBatch and MTLDrawList implementation enables use of Metal Viewport for UI and Workbench. Includes Vertex descriptor caching and SSBO Vertex Fetch mode draw call submission.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D16101
Part of a wider set of changes to Grid and Pixel snapping in the
UV Editor.
This change fixes snapping behavior for non-uniform grids, either
manually specified Fixed grids, or pixel grids where the underlying
image is non-square.
See a24fc6bbc1 for visual changes.
Maniphest Tasks: T78391
Differential Revision: https://developer.blender.org/D16275
There might be more or fewer curves in the input to the deform curves on
surface node than the original, so the curve's surface UV coordinates
need to be retrieved from the original curves.
A vertex might be connected to no edges or no faces. Most of these nodes
worked fine in that case, but we might as well make that explicit
and skip the sorting anyway.
As discussed in T101623, since face sets have become optionally stored,
(see b5f7af31d6) the default cube shouldn't have face sets--
they should be created explicitly by the user instead. This may improve
performance when modifying the default cube mesh.
The node only created a material index attribute on the result mesh
if it existed on any of the input meshes. But the input meshes might
not have the attribute if they had a single material or no materials.
As a fix, also create the attribute if the result has more than one
material.
color uniform assignment needing to be changed to ucolor was missed.
Ref T101445
Reviewed By: fclem
Maniphest Tasks: T101445
Differential Revision: https://developer.blender.org/D16236
Disable kerning in our main font to exactly restore the spacing of text
as seen in Blender 3.1 - 3.3
See D16186 for more details.
Differential Revision: https://developer.blender.org/D16186
Reviewed by Brecht Van Lommel
Checking for polygon and loop data to be referenced is too fragile
re changes in geometry node implementations. Instead, compare counts
of polygons, face corners and vertices: topology changes are unlikely
to keep all three unchanged.
Ref D15501
