When the profile only has one control point, its segment count was
determined incorrectly. There needs to be a special case for a single
control point, when there are no segments even if the curve is cyclic.
NURBS curves can be invalid when the order is less than the number
of points, or in a few other situations. Currently the evaluated data of
an invalid NURBS curve is empty. This is inconvenient because it
requires checking for empty curves when it otherwise wouldn't be
necessary. This patch replaces that fallback with copying the original
data to the evaluated points. This makes conceptual sense too, as if
the curve couldn't be evaluated-- which wouldn't necessarily delete it.
Usually the UI protects against this happening, but it's currently
possible to create an invalid curve with some operations like the
delete geometry node.
Differential Revision: https://developer.blender.org/D14837
These kinds of depsgraph evaluations should not be marked as low priority as
this could negatively affect playback performance. Low priority should mainly
be used for background tasks.
Regression from rB1a7757b0bc69/rBa0acb9bd0cc0. Special handling
(averaging) of weights on merged center vertices also requires to be
'reversed' when new correct merge order is used, compared to previous
behavior.
This commit implements copying of materials and material indices from
all of the boolean node's input meshes. The materials are added to the
final mesh in the order that they appear when looking through the
materials of the input meshes in the same order of the multi-socket
input node.
All material remapping is done with mesh-level materials. Object-level
materials are not considered, since the meshes don't come from objects.
Merging all materials rather than just the materials on the first mesh
requires a change to the boolean-mesh conversion. This subtly changes
the behavior for object linked materials, but in a good way I think;
now the material remap arrays are respected no matter the number
of materials on the first mesh input.
Differential Revision: https://developer.blender.org/D14788
This commit implements copying of materials and material indices from
all of the boolean node's input meshes. The materials are added to the
final mesh in the order that they appear when looking through the
materials of the input meshes in the same order of the multi-socket
input node.
All material remapping is done with mesh-level materials. Object-level
materials are not considered, since the meshes don't come from objects.
Merging all materials rather than just the materials on the first mesh
requires a change to the boolean-mesh conversion. This subtly changes
the behavior for object linked materials, but in a good way I think;
now the material remap arrays are respected no matter the number
of materials on the first mesh input.
Differential Revision: https://developer.blender.org/D14788
Relinking code would weirdly enough allow clearing of extra/fake user
status on IDs used by affected ID, which would be utterly wrong.
Fairly unclear why this was working OK in reported case before rBa71a513def20,
could not spot any obvious reason just from reading code...
Also, in `libblock_remap_data_update_tags`, only transfer fake user
status if `new_id` is not NULL (otherwise that would have removed that
falg from `old_id`, without actually transferring it to anything).
This patch adds allows the user to select the initial fill color when
adding a new color attribute layer.
---
{F13035372}
Reviewed By: JulienKaspar, joeedh
Differential Revision: https://developer.blender.org/D14743
* BLENDER_VERSION_CYCLE set to beta
* Update pipeline_config.yaml to point to 3.2 branches and svn tags
* Update and uncomment BLENDER_VERSION in download.cmake
- Fix default_value initialization of custom node tree interface:
This was crashing when adding a custom interface socket to a tree.
The node_socket_set_typeinfo function was called too early, creating a
default float socket, which then doesn't match the socket type after
changing to the custom type.
The node_socket_set_typeinfo only allocates and initializes
default_value when it isn't already set. That is because the function is
used either when creating new sockets or to initialize typeinfo after
loading files. So default_value has to be either null or has to be
matching the current type already.
- Fix RNA flag for string return value of the valid_socket_type callback:
String return values of registerable RNA functions need a
PROP_THICK_WRAP flag since they don't have a fixed buffer to write into.
While code deleting old (relocated to new ones) IDs would work fine in
typical cases, it would fail badly in others, when e.g. drivers would
create 'reversed' dependency from the obdata ID to the object ID.
This commit uses a less efficient, but much safer method. It also
ensures no relocated old IDs is left over in the file (previous version
could easily leave some old IDs from the old library until a full
save/reload cycle happened).
While this only had minor potential effect, both code incrementing
usercount of newly remapped IDs were wrong.
Original one would by-pass any 'ensured user' handling, newer one would
systematically make the ID directly linked...
`id_us_plus_no_lib` is to be used here.
Fact that those options are only used in a specific case, and that the
same behavior is ensured in a different part of the code in other cases,
is fairly confusing and unfortunate... At least document it.
When pushing down an Action onto an NLA track, set the new Strip's
influence to the Action's influence. This is done by setting a key due
to the way the NLA Strip influence works (it's either animated, or
ignored).
Reviewed By: sybren, RiggingDojo
Differential Revision: https://developer.blender.org/D14719
For a single day in 2015 between rBff3d535bc2a6309 and rB945f32e66d6ada,
custom data structs could be written with an incorrect maxlayer field.
This means that custom data structs read from those files would think
they have more space to add new layers than they actually did, causing
a crash if more layers were added. This was found while investigating
a crash from D14365 which adds new face corner layers in versioning.
The fix is to reset all maxlayer integers to totlayer, which is
done when writing files in current Blender anyway.
The file tests/render/motion_blur/camera_zoom_blur_perspective.blend
has this problem as it was added on 2015-07-21, right between the two
commits. Adding three custom data layers in versioning code would crash.
The problem was originally found and investigated by Martijn Versteegh
(@Baardaap), thanks!
Differential Revision: https://developer.blender.org/D14786
When the object's position depends on the geometry and the geometry
depends on the object's position, we can't count on the object's
evaluated geometry to be available. Lattices and mesh objects have
equivalent checks in this vertex parenting function.
Differential Revision: https://developer.blender.org/D14781
When height is limited, it is defined by space occupied by strips,
but at least channels 1 to 7 will be always visible. This allows it to
easily overview timeline content by zooming out to maximum extent in Y
axis and panning in X axis.
More channels can be "created" on demand by moving strip to higher
channel. When strip is removed and highest channel becomes empty, view
will stay as is until it is moved down. Then new highest point is
remembered and it is not possible to pan upwards until strip is moved to
higher channel.
Limiting takes into account height of scrubbing and markers area as
well as scrollers. This means that when zoomed out to maximum extent,
no strips are obstructed by fixed UI element.
Fixes T57976
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D14263
Geometry node group inputs and outputs get a new property that controls
the attribute name used for that field input/output when assigning the
node group to a modifier for the first time. If the default name is assigned
to an input, the default "Use attribute name" is true .
In order to properly detect when a node group is first assigned,
the modifier now clears its properties when clearing the node group.
Ref T96707
Differential Revision: https://developer.blender.org/D14761
The crash is caused as the subdivision wrapper does not have loop
normals, which are generally computed at the end of the modifier stack
evaluation via `mesh_calc_modifier_final_normals`. (Note that they are
initially computed, but deleted by the subdivision wrapper creation.)
This records in the mesh runtime whether loop normals should have been
computed and computes them alongside the subdivision wrapper.
Differential Revision: https://developer.blender.org/D14489
It was possible to set context pointers for buttons via the layout, but
not for buttons in places where the layout system wasn't used (where
buttons are placed manually). This is needed for buttons in the
Outliner, see D14653.
Goals:
* Better high level control over where devirtualization occurs. There is always
a trade-off between performance and compile-time/binary-size.
* Simplify using array devirtualization.
* Better performance for cases where devirtualization wasn't used before.
Many geometry nodes accept fields as inputs. Internally, that means that the
execution functions have to accept so called "virtual arrays" as inputs. Those
can be e.g. actual arrays, just single values, or lazily computed arrays.
Due to these different possible virtual arrays implementations, access to
individual elements is slower than it would be if everything was just a normal
array (access does through a virtual function call). For more complex execution
functions, this overhead does not matter, but for small functions (like a simple
addition) it very much does. The virtual function call also prevents the compiler
from doing some optimizations (e.g. loop unrolling and inserting simd instructions).
The solution is to "devirtualize" the virtual arrays for small functions where the
overhead is measurable. Essentially, the function is generated many times with
different array types as input. Then there is a run-time dispatch that calls the
best implementation. We have been doing devirtualization in e.g. math nodes
for a long time already. This patch just generalizes the concept and makes it
easier to control. It also makes it easier to investigate the different trade-offs
when it comes to devirtualization.
Nodes that we've optimized using devirtualization before didn't get a speedup.
However, a couple of nodes are using devirtualization now, that didn't before.
Those got a 2-4x speedup in common cases.
* Map Range
* Random Value
* Switch
* Combine XYZ
Differential Revision: https://developer.blender.org/D14628
Motion paths can now be initialised to more sensible frame ranges,
rather than simply 1-250:
- Scene Frame Range
- Selected Keyframes
- All Keyframes
Reviewed By: sybren, looch, dfelinto, pablico
Maniphest Tasks: T93047
Differential Revision: https://developer.blender.org/D13687
Failure to clip automatic-names meant named could end with a "." for e.g.
Error in [0] meant the clipped text was copied then
immediately overwritten.
[0]: 354e6b9c18
