Fix for T84928 .
Considering the changes , issue is resolved ( Ignoring readability issues) .
**Changes **:
- `Change in value assignment of fu/v/w :` Observing previous code , I noticed ,value assigned to them is equivalent to -0.5 ( i.e. co-ordinate of left most vertex of lattice size =1 where centre of lattice is origin ) .
- `Change in value assignment of du/v/w :` Margin ( distance ) between each division of surface along any axis is equivalent to **( (length of surface along axis ) / (no of division line - 1) )** . that's why is changed it to (default_size/unew -1) .
- ` New variable declared "default_size" :` As far as I gone through the code , I noticed values 1 < du ,fu < 1 , which indicates these values were calculated with respect to default lattice of size 1 .
- `removed pntsu/v/w != 1 check :` Following changes inside the if block worked properly for pntsu/v/w = 1 .
Reviewed By: lichtwerk, campbellbarton
Differential Revision: https://developer.blender.org/D10353
Ids stored in the `id` attribute cannot be assumed to be unique. While they
might be unique in some cases, this is not something that can be guaranteed
in general. For some use cases (e.g. generating "stable randomness" on points)
uniqueness is not important. To support features like motion blur, unique ids
are important though.
This patch implements a simple algorithm that turns non-unique ids into
unique ones. It might fail to do so under very unlikely circumstances, in
which it returns non-unique ids instead of possibly going into an endless
loop.
Here are some requirements I set for the algorithm:
* Ids that are unique already, must not be changed.
* The same input should generate the same output.
* Handle cases when all ids are different and when all ids are the same
equally well (in expected linear time).
* Small changes in the input id array should ideally only have a small
impact on the output id array.
The reported bug happened because cycles found multiple objects with
the same id and thought that it was a single object that moved on every
check.
Differential Revision: https://developer.blender.org/D10402
This patch will share the AOV settings between Cycles and Eevee.
It enable using the AOV name conflict detection of Blender. This
means that unlike how Cycles used to work it isn't possible to add an
AOV with a similar name. Conflicts with internal render pass names will
be indicated with an Warning icon.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D9774
Having a vertex group in a mesh slowed down unrelated operations
such as selection.
De-duplicating custom-data arrays for layers that contain pointers
can become slow without any benefit as the content never matches.
Use full copies when storing custom-data for edit-mesh undo.
This patch will show textures in the image editor with the maximum
available resolution determined by the GPU Hardware/Driver.
Currently the size is limited by the user preference texture size limit.
An image user can set the `IMA_SHOW_MAX_RESOLUTION` flag to request
gpu textures in the max supported resolution. When this flag isn't
set the gpu texture is limited by the user preference setting.
When the gl resolution limit is disabled the GPU texture is always
created for the max supported resolution.
Reviewed By: Clément Foucault
Maniphest Tasks: T81206
Differential Revision: https://developer.blender.org/D9160
The driver variable `splines[0]` (on a curve)
behaved as if the path was `splines`.
Resolve pointers was well as properties as it's supported by the caller.
Error in original commit that added property support
82b0a9e369.
The edge preview data of the boundary needs to be freed with the
boundary data created for the brush. Also, all data for the
ScultpSession preview that is used to render the cursor needs to be
freed with the ##SculptSession##.
Found by Jacques Lucke
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10173
Due to an off-by-one error the generated studio light icons did not show
the influence of the 4th light. This fix changes the loop to iterate
over all of the lights when computing the lighting.
Differential Revision: https://developer.blender.org/D10283
Because the the vertex group name-to-index map is stored in the object
rather than object data, the object info node has to replace the
map when it replaces the mesh component on the geometry set with mesh
data from another object.
This normally works fine as a way to use the vertex groups from the
input mesh, but when passing this mesh to the next modifier, the entire
mesh component was replaced, removing the vertex group name map.
This commit adds a function to replace only the mesh data in mesh
component, uses it in the modifier code, and updates the relevant
comments.
Note that the fact that vertex group names are stored in object data
is a legacy design decision that should be reevaluated at some point.
Differential Revision: https://developer.blender.org/D10256
Previously this relied on the dependency graph to detect changes in the screen
datablock, which would then notify the renderers. This was rather indirect an
not even really by design. Instead use notifiers to tag specific 3D viewports
to be updated.
Includes changes to BKE_scene_get_depsgraph to accept a const Scene pointer.
Testing if this works correctly requires adding back commits 81d444c and 088904d,
since those have been temporarily reverted.
Differential Revision: https://developer.blender.org/D10235
Use transform matrices instead of loc, rot, scale variables to store instance transforms.
Reviewed By: JacquesLucke
Differential Revision: http://developer.blender.org/D10211
This improves the fix introduced in rBdc8b31af578bfcf9f77dbce6d7b7da1006a3c8c1.
While it did not result in other bugs afaik, I thought it would be
good to make the fix more specific, in case some other code did
expect `layer->data` to be null. This updated fix checks for the
very specific case the fix was intended for.
The issue was that boolean custom data layers were not written to files,
because the dna struct name `bool` does not exist. Adding a struct that
just contains a `bool/uint8_t` does not seem to be possible, it looks like
the minimum dna struct size is 4 bytes.
The proposed solution has two parts:
1. Write the custom data layer using `BLO_write_raw` instead of
`BLO_write_struct_array_by_name`.
2. When loading a file, reinitialize any custom data layer that was
not saved correctly (this is just a fix for existing files).
Differential Revision: https://developer.blender.org/D10194
The `image_get_gpu_texture` didn't use the iuser->view_index but
recalculated the requested view again. This lead to inconsistent
behavior when switching between multi view textures or stereo textures.
This has been fixed by ensuring that the `iuser->view_index` is always
used.
An Image has only place to store 2 view textures. This is done for
right/left eye compositing. A multi view texture can have more views.
This would lead to reading and writing to unallocated space.
When a multiview texture is requested that is larger than 1. It will
always be cached as being the first eye. The `gpu_view` of the Image is
also used as a cache key to check this.
Dividing the workload by number of tasks in float is imprecise and
lead in some cases to particles not being calculated at all
(example: 20000 particles, 144 tasks).
Switching this calculation to integer makes sure we don't lose count.
Differential Revision: https://developer.blender.org/D10157
Things like pointers to particle systems, or softbody data being stored
outside of its modifier, make it impossible for internal modifier copy
data code to be self-contained currently. It requires extra processing.
In existing code this was handled in several different places, in
several ways, and alltogether fairly inconsistently. Some cases were
even not properly handled, causing e.g. crashes as in T82945.
This commit addresses those issues by:
* Adding comments about the hackish/unsafe parts `psys` implies when
copying some modifier data (since we need to ensure particle system
copying and remapping of those pointers separately).
* Adding as-best-as-possible handling of those cases to
`BKE_object_copy_modifier` (note that it remains fragile, but is
expected to behave 'good enough' in any practical usecase).
* Remove special handling for specific editor code
(`copy_or_reuse_particle_system`). This should never have been
accepted in ED code area, and is now handled by
`BKE_object_copy_modifier`.
* Factorize copying of the whole modifier stack into new
`BKE_object_modifier_stack_copy`, now used by both `object_copy_data`
and `BKE_object_link_modifiers`.
Note that this implies that `BKE_object_copy_modifier` and
`BKE_object_copy_gpencil_modifier` are now to be used exclusively to
copy single modifiers. Full modifier stack copy should always use
`BKE_object_modifier_stack_copy` instead.
Fix T82945: Crash when dragging modifiers in Outliner.
Maniphest Tasks: T82945
Differential Revision: https://developer.blender.org/D10148
`BKE_volume_is_loaded` uses `grids.filepath` to determine if the
grids are already loaded. The issue was that `grids.filepath` was
set before the grids were loaded, resulting in incorrect early
returns for other threads.
Differential Revision: https://developer.blender.org/D10150
By design the modified object transformations should still work and
affect the geometry nodes results. The current behaviour, however, would
make the geometry from the object info to not be affected by the
modified object transformations. This patch changes that by default.
In a similar fashion the Location, Rotation and Scale sockets outputs
should be aware of whether the output should be in the global space or in the
space of the nodetree.
To solve this, the patch introduces a new transformation space "enum"
where users can pick "Original" or "Relative" space.
Original
--------
Output the geometry relative to the input object transform, and the
location, rotation and scale relative to the world origin.
Relative
--------
Bring the input object geometry, location, rotation and scale into the
modified object maintaining the relative position between the two objects in
the scene.
Relative space violates a bit the design of the nodetree. The geometry in this
case is transformed so that moving the modified object doesn't interfere with
the geometry. This is particularly useful for the boolean node for instance.
"Original" is the default space, but old files are set to "Relative" for
backwards compatibility.
Differential Revision: https://developer.blender.org/D10124
Bevel caps always had incorrect normals, causing display glitches
in some cases.
It seems this never worked properly (at least 2.79 also had this bug).
Use the projection vector as the normal.
The double quaternion blending method in addition to the deformation
matrix of each bone requires their rest matrices. For ordinary bones
this literally should use the bone rest matrix without any ambiguity.
However, it was also using the bone rest matrix for all of its
B-Bone segments, which is incorrect and causes strange deformation
in some cases involving extreme non-uniform scale, especially
at boundaries between different B-Bones. There is also a similar
known issue that happens with scale at bending joints, and this
fix reduces the distortion when both bones are B-Bones.
This changes both the Armature modifier and the Armature constraint
to use the actual segment rest matrices. Unlike bones, these can have
scale even in rest pose, so normalization is required.
Differential Revision: https://developer.blender.org/D10003
The issue was that the mesh shared its vertex weights with the
original mesh (to reduce memory consumption). The solution is
to make a local copy of the vertex weights in this case.
Our beloved shapekeys are 'virtual' overrides, they need special
snowflake treatment here as well.
They do not have any override data, from override perspective they are
considered as mere sub-data from their owning ID (mesh, lattice, etc.).
Therefore, we should not copy override data from them, but instead
properly flag those new IDs as `LIB_EMBEDDED_DATA_LIB_OVERRIDE`.
Found while investigating T84373.
This commit adds the ability to provide a default value to
`attribute_try_get_for_output` and uses it for the `Point Scale` node,
which is important because the node uses multiplication.
The idea is to keep "name-specific" functionality in nodes rather than in
the attribute API, otherwise the complexity will be hard to keep track of.
So this fix doesn't apply to the Attribute Vector Math node, but hopfully
that is okay since that's now a lower level node for this purpose anyway.
Differential Revision: https://developer.blender.org/D10115
This fixes the behavior of some nodes when the same attribute
name is used for input and output. If both attributes have a
different type, they can't exist at the same time. Therefore,
the input attribute has to be removed in order to create the
output attribute.
Previously, the input attribute was remove before it was used
in any computations. Now, the output is written to a temporary
buffer and only later saved in the geometry component. This
allows both attributes to coexist within the node.
The temporary attribute is only create when necessary. The
normal case without name collisions still works the same
as before.
Differential Revision: https://developer.blender.org/D10109
Ref T83793.
The green is still distinct from the more turquoise use for geometry, and
they are never used in the same node graph. The use of red makes sense, but
would need changes to other sockets and categories to set it apart well.
Ref T82689
The translate node moves every point in the geometry, and the scale
node multiplies the "scale" attribute of the input geometry by its input.
While these operations are already possible with the "Attribute" nodes,
these new nodes fit nicely with the nodes specifically for changing the
"rotation" attribute that already exist, and they provide a simpler way
to do the same thing.
Differential Revision: https://developer.blender.org/D10100
This commit adds the "Save as Render" feature to the file output node,
that allows to disable the application of the configured view transform
and other color management settings on the image. If disable it uses
the standard view transform instead. This feature was originally
suggested in T83842 and is part of the color management improvements
task in T68926. With this feature it is possible to toggle the
application of the color management settings for each input socket
of the File Output node individually.
Reviewed By: brecht
Maniphest Tasks: T68926, T83842
Differential Revision: https://developer.blender.org/D9921
This change will try to add meta data when using a multilayered open
exr file output node in the compositor. It adds the current scene meta
data and converts existing cryptomatte keys so it follows the
naming that is configured in the file output node.
This change supports the basic use-case where the compositor is
used to output cryptomatte layers with a different naming scheme to
support external compositors. In this case the Multilayered OpenEXR
files are used and the meta data is read from the render result.
Meta data is found when render layer node is connected with the
file output node without any other nodes in between. Redirects and empty
node groups are allowed.
The patch has been verified to work with external compositors.
See https://devtalk.blender.org/t/making-sense-of-cryptomatte-usage-in-third-party-programs/16576/17
See patch for example files.
Reviewed By: Sergey Sharybin
Differential Revision: https://developer.blender.org/D10016
This adds a new Align Rotation to Vector node based on the mockup
in T83669.
Reviewers: HooglyBoogly, simonthommes
Differential Revision: https://developer.blender.org/D10081
Previously, the span returned by `WriteAttribute`s might not contain the
current value of the attribute for performance reasons. To avoid some
bugs, the span now always contains the old values (they might have to
be copied over from the internal storage, dependending on how the
attribute is stored).
The old behavior is still available with the `get_span_for_write_only`
method. The span that it returns might not contain the current
attribute values. Therefore, it should only be used when you want
to overwrite an attribute without looking at the old values.
When painting using Auto-Normalize or Lock Relative with some
groups locked, the locked weights may not add up precisely to
1 because of precision limitations, which results in creating
nonzero weights close to FLT_EPSILON. With Lock Relative display
mode this is very obvious and annoying (random red points amid
black or blue), so add an epsilon check to consider less than
1e-6 unlocked weight to be the same as 0.
In addition, in cases when no weight can be painted due to locks,
don't create vertex group entries at all if they don't exist yet.
Also, don't run Auto Normalize when not painting a deform group.
Differential Revision: https://developer.blender.org/D10000
* Simplify and clarify logic in `BKE_undosys_step_undo/redo_with_data_ex`,
by adding early return on invalid situations, renaming some variables,
and adding comments.
* Add more sanity checks in those functions.
No behavioral change are expected here, besides in potential edge-case,
invalid situations.
This is a preliminary change, before some deeper modifications of
`BKE_undosys` undo/redo API.
Differential Revision: https://developer.blender.org/D10033
