Every call to `BKE_displist_make_curveTypes` already checks the object
type beforehand, there is no need to check it again. Also removed an
outdated comment.
`BKE_displist_make_curveTypes` had a `for_orco` argument that was
always false in calls to the function. Removing it allows the curve
displist and modifier evaluation code to become simpler. There are
some related cleanups in rBdf4299465279 and rB93aecd2b8107.
Sometimes the current spline list isn't part of the original curve, like
when using the deformed control points, etc. This will be helpful in
the curve modifier stack.
While the const correctness of `ListBase` is quite limited, it's helpful
to have a way to retrieve the `Nurb` list from curve object data without
casting away const from the curve.
Weird 'embedded for overrides' flag of embedded IDs (including ShapeKeys
in override context) was not properly cleaned up when making an override
fully local.
Reported by studio, thanks.
@jbakker should be backported to 2.93LTS if possible.
* Reduce code duplication.
* Give methods more standardized names (e.g. `move_to_initialized` -> `move_assign`).
* Support wrapping arbitrary C++ types, even those that e.g. are not copyable.
The crash was caused by a mistake in 5f9677fe0c
where the pointers to the custom data layers would be overwritten with the one
for the first layer, as CustomData_duplicate_referenced_layer is only about the
first layer. customData_duplicate_referenced_layer_index should be used instead
to duplicate the right layer.
This option allow users to see the view layer in context to the
others. It is particularly useful to see which view layers have which
collections enabled, and their render settings (holdout, ...).
This option is off by default.
Differential Revision: https://developer.blender.org/D11708
Now, the mask layers are copied and later a cleanup is done in order to verify all mask layer exist in destination object. If the layer mask does not exist, it's removed from the list.
This is related to T89234.
When baking some data, we create a new Mesh with edits and modifiers applied.
However, in some cases (e.g. when there is no modifier), the returned Mesh is
actually referencing the original one and its data layers. When autosmooth is
enabled we also split the Mesh. However, since the new Mesh is referencing the
original one, although `BKE_mesh_split_faces` is creating new vertices and edges,
the reallocation of the custom data layers is preempted because of the
reference, so adding the new vertices and edges overwrites valid data
To fix this we duplicate referenced layers before splitting the faces.
Reviewed By: brecht
Differential Revision: https://developer.blender.org/D11703
This patch adds a left aligned sidebar to the spreadsheet editor. This
Sidebar can be used to navigate the geometry component types and
attribute domains. It also provides a quick overview of domain sizes.
It replaces the two dropdowns in the regions header.
Next step will be to add the domain cycling shortcut
using the CTRL + mouse wheel.
Reviewer: Dalai Felinto (dfelinto), Julian Eisel (Severin),
Hans Goudey (HooglyBoogly).
Differential Revision: https://developer.blender.org/D11046
* Mark either all or no class methods with override
* Don't use zero sized array since it has a different size in C and C++.
Using a little more memory here is not significant.
* Don't use deprecated mechanism to mark private GSet members in clang
just like we don't for MSVC, it warns even for simple zero initialization.
Avoid computationally expensive copying operations
when only some settings have been modified.
This is done by adding support for updating parameters
without tagging for copy-on-write.
Currently only mesh data blocks are supported,
other data-blocks can be added individually.
This prepares for changing values such as edit-mesh auto-smooth angle
in edit-mode without duplicating all mesh-data.
The benefit will only be seen when the user interface no longer tags
all ID's for copy on write updates.
ID_RECALC_GEOMETRY_ALL_MODES has been added to support situations
where non edit-mode geometry is modified in edit-mode.
While this isn't something user are likely to do,
Python scripts may change the underlying mesh.
Reviewed By: sergey
Ref D11377
When use smooth tool in a cyclic stroke, the smoothing algorithm was not using the adjacent points if these are the end or start of stroke.
Now, the smooth uses the other extreme of the stroke to compute smoothness.
This change will ensure at least one 'local' collection can host the new
'local' override of all objects (indirectly) overridden by this
operation, such that no new override of object ends up in master
collection (which can become extremely messy in production files).
In practice, it means often at least one of the linked collection owning
those objects also has to be overridden.
NOTE: This only affect cases where root overridden linked object has
some dependencies outside of its own root linked collection. While this
situation should be avoided, it cannot always be, so we try to support
it as best as we can.
Those were missing proper (explicit) object cache clear, and DEG
tagging.
Note that this was most likely not an common issue in practice (Collection
object cache clearing recursively goes into all parents, so master
collection would only miss it in case they had no child collections at
all, and tagging of those happens almost always at other steps on
remapping). But better to be explicit and consistent here in any case.
This reverts commit rB3a48147b8ab92, and fixes the issues with linking
etc.
Change compared to previous buggy commit (rBf8d219dfd4c31) is that
new `BlendFileReadReports` reports are now passed to the lowest level
function generating the `FileData` (`filedata_new()`), which ensures
(and asserts) that all code using it does have a valid non-NULL pointer
to a `BlendFileReadReport` data.
Sorry for the noise, it's always when you think a change is trivial and
do not test it well enough that you end up doing those kind of
mistakes...
When cut a stroke of 1 point, the clean up done to avoid keep 1 point strokes removes the memory, but the pointer to the first stroke was not set to NULL. As this pointer is invalid now, any use of this produces a segment fault because the pointer is corrupted..
This patch fixes many minor spelling mistakes, all in comments or
console output. Mostly contractions like can't, won't, don't, its/it's,
etc.
Differential Revision: https://developer.blender.org/D11663
Reviewed by Harley Acheson
This problem has surprisingly been there for quite a few months.
For point clouds all attributes were handled the same, even "position",
which should be transformed when combining source points into the
destination.
Previously the code assumed that curve instances had no attributes.
This is true when the data came from curve objects, which don't support
attributes currently, but it isn't necessarily true when retrieving curves
from evaluated geometry sets.
Make the virtual functions protected and simpler, so that the logic is
better contained in the base class's implementation. Also introduce a
`copy_without_attributes` method to be used for realizing instances.
Add direct user feedback (as a warning report) to user when recursive
resync of overrides was needed.
And some timing (as CLOG logs) about main readfile process steps.
This is essentially adding a new BlendFileReadReport structure that wraps
BKE_reports list, and adds some extra info (some timing, some info about
overrides and (recursive) resync, etc.).
`src` and `dst` are perfectly clear, and avoid repeating unecessary
characters when writing the variables many times, allowing more space
for everything else.
The depth cache (located in `RegionView3D::depths`) is used for quick
and simple occlusion testing in:
- particle selection,
- "Draw Curve" operator and
- "Interactive Light Track to Cursor" operator,
However, keeping a texture buffer in cache is not a recommended practice.
For displays with high resolution like 8k this represents something
around 132MB.
Also, currently, each call to `ED_view3d_depth_override` invalidates
the depth cache. So that depth is never reused in multiple calls from
an operator (this was not the case in blender 2.79).
This commit allows to create a depth cache and release it in the same
operator. Thus, the buffer is kept in cache for a short time, freeing
up space.
No functional changes.
A different data structure / implementation is used for curves in the
node tree currently. Converting from the DNA `Curve` structure to this
wasn't slow, but it's nice to decrease overhead. In a test of 14000
splines with 128000 points, this halves the runtime from about 5ms
to about 2.5ms.
The normals were broken because the normal calculation mode wasn't set.
This patch adds a default normal mode so all code creating a spline does
not necessarily have to set it manually. In the future there should be a
way to change this value in the node tree.
