There was some invalid state in the screen here, some areas had
sa->full set even though no screen was maximized, which then caused
a restore from the wrong (empty) area, which then led to spacedata
being empty and a crash.
This fix properly clears the sa->full after restore, and also fixes
existing .blend files in such an invalid state.
Previously it was returning short, which was really easy to (a) compare against
non-ID type value (b) forget to handle some specific value in switch statement.
Both issues happened in the nearest past, so it's time to tighten some nuts
here.
Most of the change related on silencing strict compiler warning now, but there
is also one tricky aspect: ID_NLA is not in the IDType enum. So there is still
cast to short to handle that switch. If someone has better ideas how to deal
with this please go ahead :)
This will allow much finer controll over how we copy data-blocks, from
full copy in Main database, to "lighter" ones (out of Main, inside an
already allocated datablock, etc.).
This commit also transfers a llot of what was previously handled by
per-ID-type custom code to generic ID handling code in BKE_library.
Hopefully will avoid in future inconsistencies and missing bits we had
all over the codebase in the past.
It also adds missing copying handling for a few types, most notably
Scene (which where using a fully customized handling previously).
Note that the type of allocation used during copying (regular in Main,
allocated but outside of Main, or not allocated by ID handling code at
all) is stored in ID's, which allows to handle them correctly when
freeing. This needs to be taken care of with caution when doing 'weird'
unusual things with ID copying and/or allocation!
As a final note, while rather noisy, this commit will hopefully not
break too much existing branches, old 'API' has been kept for the main
part, as a wrapper around new code. Cleaning it up will happen later.
Design task : T51804
Phab Diff: D2714
This situation happens when a file with a text effect sequencer strip is
loaded in Blender < 2.76 and saved. This destroys the effect data, causing
a crash in Blender ≥ 2.76.
d2f748a222 prevented the crash when opening such a file, but accessing
the strip still caused a crash. This commit fixes that by actually
initialising the invalid strip. Of course this still causes data loss, but
that already happened by opening & overwriting the file in Blender < 2.76.
Even though in that specific it was probably safe-ish, there is no
guarantee at this point Brush we want to remove are not used somewhere,
better take the slightly slower, much safer `BKE_libblock_delete()` path here.
Root of the issue here was that two stupid modifiers could create named
vgroup CD layers (vgroup editing ones... shame on me :") ).
Fix that, and added some versionning code to also fix 'corrupted' blend
files created by those so far.
We unfortunately cannot fix this for previous versions of Blender, but
at least the issue (Blender crashing on unknown IDProp types) should now
be addressed for future.
Simply reset unknown IDProp types to integer one, and reset its value to zero.
Previously, every RenderPass would have a bitfield that specified its type. That limits the number of passes to 32, which was reached a while ago.
However, most of the code already supported arbitrary RenderPasses since they were also used to store Multilayer EXR images.
Therefore, this commit completely removes the passflag from RenderPass and changes all code to use the unique pass name for identification.
Since Blender Internal relies on hardcoded passes and to preserve compatibility, 32 pass names are reserved for the old hardcoded passes.
To support these arbitrary passes, the Render Result compositor node now adds dynamic sockets. For compatibility, the old hardcoded sockets are always stored and just hidden when the corresponding pass isn't available.
To use these changes, the Render Engine API now includes a function that allows render engines to add arbitrary passes to the render result. To be able to add options for these passes, addons can now add their own properties to SceneRenderLayers.
To keep the compositor input node updated, render engine plugins have to implement a callback that registers all the passes that will be generated.
From a user perspective, nothing should change with this commit.
Differential Revision: https://developer.blender.org/D2443
Differential Revision: https://developer.blender.org/D2444
The absence of datablock properties "will certainly be resolved soon as the need for them is becoming obvious" said the [[http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.67/Python_Nodes|Python Nodes release notes]]. So this patch allows Python scripts to create ID Properties which reference datablocks.
This functionality is implemented for `PointerProperty` and now such properties can be created with Python.
In addition to the standard update callback, `PointerProperty` can have a `poll` callback (standard RNA) which is useful for search menus. For details see the test included in this patch.
Original author: @artfunkel
Alexander (Blend4Web Team)
Reviewers: brecht, artfunkel, mont29, campbellbarton
Reviewed By: mont29, campbellbarton
Subscribers: jta, sergey, campbellbarton, wisaac, poseidon4o, mont29, homyachetser, Evgeny_Rodygin, AlexKowel, yurikovelenov, fjuhec, sharlybg, cardboard, duarteframos, blueprintrandom, a.romanov, BYOB, disnel, aditiapratama, bliblubli, dfelinto, lukastoenne
Maniphest Tasks: T37754
Differential Revision: https://developer.blender.org/D113
That one was:
* Resetting non-ID pointers (lib_link_xxx funcs should only affect ID
pointers, everything else shall be done in direct_link_xxx func).
* Even worse, always calling lib_link_animdata, even when
LIB_TAG_NEED_LINK tag was unset...
We do not need any special handling anymore for usercount of images used
by faces/polygons (tpage stuff), since we have the 'real_user' handling,
which will gracefully cope with all possible situations.
So better not keep that ugly confusing useless special case.
Mainly:
* Add missing `IDP_LibLinkProperty()` calls for many ID types
(harmless currently, but better be consistent here!).
* Bring lib_link_xxx functions more in line with each other.
* Replace some long if/else by switch.
For Windows 8.1 and X11 (Linux, BSD) now use the DPI specified by the operating
system, which previously only worked on macOS. For Windows this is handled per
monitor, for X11 this is based on Xft.dpi or xrandr --dpi. This should result
in appropriate font and button sizes by default in most cases.
The UI has been simplified to a single UI Scale factor relative to the automatic
DPI, instead of two DPI and Virtual Pixel Size settings. There is forward and
backwards compatibility for existing user preferences.
Reviewed By: brecht, LazyDodo
Differential Revision: https://developer.blender.org/D2539
Instead of calling a function looping over whole list of a given ID
type, make whole loop over Main in parent function, and call functions
writing a single datablock at a time.
This design is more in line with all other places in Blender where we
handle whole content of Main (including readfile.c), and much more easy
to extend and add e.g. some generic processing of IDs before/after
writing, etc.
From user point, there should be no change at all, only difference is
that data-block types won't be saved in same order as before (.blend
file specs enforces no order here, so this is not an issue, but it could
bug some third party users using other, simplified .blend file reader maybe).
Reviewers: sergey, campbellbarton
Differential Revision: https://developer.blender.org/D2510
Internal change needed for template support.
Loading the user preferences first so it's possible
for preferences to control startup behavior.
In general it's useful to load preferences before data-files,
so we know security settings for eg.
This slightly changes SDef behavior, by now respecting object transforms
at bind time, thus not requiring the objects to be aligned in their
respective local spaces, but instead using world space.
Please never, ever use same DNA var for two different things. Even worse
if they do not have same type and ranges!
This is only ensuring issues (as described in report, but also if
animating both RNA props using same DNA var... yuck).
And we were not even saving any byte in DNA, could reuse some padding
there to store the two new needed vars (yes, two, since we cannot re-use
existing one if we want to keep backward *and* forward compatibility).
We now assert that we now file version of libraries (needed for
do_version after linking step), so for missing libraries, set dummy
numbers (using version of main .blend file actually).
Better to have clear way to tell whether flag is parameter for
BKE_library_foreach_ID_link(), parameter for its callback function, or
return value from this callback function.
We are not bumping file version, but we cannot have the doversion code running twice.
In this particular case it was crashing files, since we were setting node->storage to NULL, and later on accessing it.
This is much more flexible solution which will allow doing some
more procedural features.
Reviewers: brecht, dfelinto, mont29
Reviewed By: mont29
Subscribers: Severin
Differential Revision: https://developer.blender.org/D2403
New options to define the style of the animation paths in order to get
better visibility in complex scenes.
Now is possible define the color, thickness and several options relative
to the style of the lines used to draw motion path.
This commit introduces the ability to use the Robert Penner easing equations
or a Custom Curve to control the way that the "Interpolate Sequence" operator
interpolates between keyframes. Previously, it was only possible to get linear
interpolation between the gp frames.
Workflow:
1) Place current frame between a pair of GP keyframes
2) Open the "Interpolate" panel in the Toolshelf
3) Choose the interpolation type (under "Sequence Options")
4) Adjust settings (e.g. if you're using "Custom Curve", use the curvemap widget
to define the way that the interpolation proceeds)
5) Click "Sequence" to interpolate
6) Play back/scrub the animation to see if you've got the result you want
7) If you need to make some tweaks, undo, or delete the generated keyframes,
then repeat the process again from step 4 until you've got the desired result.
Things like `BLI_uniquename` had nothing, but really nothing to do in
BLI_path_util files!
Also, got rid of length limitation in `BLI_uniquename_cb`, we can use
alloca here to avoid overhead of malloc while keeping free size (within
reasonable limits of course).
Basic idea is to store fileversion in Library datablock, and split again
Main by libraries after lib linking, do_versions_after_liblink on
those separated Mains, and merge again.
This allows to still have correct versions for each data-block in that
second do_versions step.
Note that this is not used currently in master (might be soon, though),
but is needed for 2.8 work.
