It is quite likely in a triangulated mesh that the actual island edge
belongs to a different triangle than the current pixel; for example
consider corners of a triangulated axis aligned rectangle face that
have the additional edge: a pixel there will have to be assigned to
one of the triangles, but one of the edges of the original rectangle
can only be accessed through the other triangle.
Thus for robust operation it is necessary to do a recursive search.
The search is limited by requiring that it only goes through edges
that bring it closer to the target point, and also by depth as a
safeguard.
Differential Revision: https://developer.blender.org/D2409
The code requires the pixel on the other side of the seam to be assigned
precisely to the expected triangle. This can cause false negatives around
vertices, where a pixel is likely to touch multiple triangles and thus
cannot be said to unambiguously belong to any one of them, so check
distance to the intended triangle and accept the result if it's close.
1. Forcibly symmetrize the neighbor relations, so that if A is neighbor
of B, B is neighbor of A. The existing code is guaranteed to violate
this if texture resolution is different between the sides of a seam.
2. In texture mode dynamic paint adds a 1 pixel wide border around the
islands. These pixels aren't really part of the dynamic paint domain
and thus by design can't have symmetrical neighbor relations. This
means they can't be treated by effects like normal pixels.
The simplest way to handle it in a consistent way is to exclude
them from effects, but add an additional pass that recomputes them
as average of their non-border neighbors, located on both sides of
the seam.
This splits `interp_weights_face_v3` into `interp_weights_tri_v3` and
`interp_weights_quad_v3`, in order to properly handle three sided polygons
without needing a useless extra index in your weight array. This also
improves clarity and consistency with other math_geom functions, thus
reducing potential future errors.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D2461
Other than implementing a `mid_v3_v3_array` function, this removes
`cent_tri_v3` and `cent_quad_v3` in favor of `mid_v3_v3v3v3` and
`mid_v3_v3v3v3v3` respectively.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D2459
Am pretty sure node update should not touch to Main database like that,
but for now let's allow it, I guess the hack is needed for things like
Sverchok. ;)
If a very low wetness absolute alpha brush is used with spread and
drying effects enabled, some pixels will rapidly accumulate paint.
This happens because paint drying code applies a minimal wetness
threshold that causes the paint to instantly dry out.
Specifically, every frame the brush adds paint at the specified
absolute alpha and wetness set to the minimal threshold, spread
drops it below threshold, and finally drying moves all paint to
the dry layer. This drastically accelerates the rate of flow of
paint into the affected pixels.
Fortunately, the reason paint spread actually ends up decreasing
wetness turns out to be a simple floating point precision problem,
which can be easily fixed by restructuring the affected expression.
Reported on IRC by dfelinto, thanks.
Root of the issue was that opening a new text file would create
datablock with one user, when Text editor is actually a 'user one' user.
This was leaving Text datablocks in inconsitent user count, and
generating asserts in BKE_library area.
Also changed a weird piece of code related to that extra user thing in
main remapping func.
Main issue here was that in old usercount system 'user_real' did simply
not allow that kind of thing to work. With new pait of 'USER_EXTRA'
tags, it becomes possible to handle the case correctly, by merely refining
checks about indirectly use objects whene removing them from a scene.
Incidently, found another related bug, 'link group objects to scene' was not
incrementing objects' usercount - bad, very very bad!
Data transfer was not checking if the required geometry existed, thus
causing a segfault when it didn't. This adds the required checks, and
reports errors if geometry is missing.
This also replaces instances of the words "polygon" and "loop" in error
messages with "face" and "corner" respectively, to be consistent with
the rest of the existing UI.
Reviewed By: mont29
Differential Revision: http://developer.blender.org/D2410
Was a waaaaayyyyy to much generic name for such a specific func, renamed
to much more descriptive BKE_libblock_relink_to_newid().
In near future (few weeks, to limit as much as possible silent mismatch
in branches), will rename BKE_libblock_relink_ex to BKE_libblock_relink,
this is the real generic data-block relinking func!
Reading rest of the code, it's obvious we want to start à YOFF lines
from start of rect2i, so we have to also multiply by number of
components.
Also did some minor cleanup.
Code was not accounting for possibilities that width or height of given
buffers may be smaller than XOFF/YOFF...
Note that I seriously doubt that drop code actually works (as in, gives
expected results) when applied to tiles like it seems to be done
currently, but this is much more complex (and involved) topic.
This sets forces to zero, when Nabla is zero and a grayscale texture is
used or texture mode is Gradient or Curl.
Nabla equal to zero was causing a zero division, and forces ended up
being set to `nan`.
Reviewed By: mont29
Differential Revision: http://developer.blender.org/D2393
In ccgDM and emDM, looptri array recalculation was being handled
directly by `*DM_getLoopTriArray` (`getLoopTriArray` callback), while
`*DM_recalcLoopTri` (`recalcLoopTri` callback) was doing nothing.
This results in the array not being recalculated when other functions
that depend on the array data called the recalc function.
This moves all the recalculation code to `*DM_recalcLoopTri` and makes
`*DM_getLoopTriArray` call that.
This commit also makes a minor change to the `getNumLoopTri` function,
so that it returns the correct number without having to recalculate the
looptri array.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D2375
This aims at always ensuring that ID.newid (and relevant LIB_TAG_NEW)
stay in clean (i.e. cleared) state by default.
To achieve this, instead of clearing after all id copy call (would be
horribly noisy, and bad for performances), we try to completely remove
the setting of id->newid by default when copying a new ID.
This implies that areas actually needing that info (mainly, object editing
area (make single user...) and make local area) have to ensure they set
it themselves as needed.
This is far from simple change, many complex code paths to consider, so
will need some serious testing. :/
When there were no prior palettes, creating a new one didn't automatically make it active.
This caused problems when trying to rename the color, as the RNA code assumed that if there's
a color, it must come from the active palette.
This commit partially fixes the problem by ensuring that if there are no palettes, the first
one will always be made active.
- Remove 'rotate_m2', unlike 'rotate_m4' it created a new matrix
duplicating 'angle_to_mat2' - now used instead.
(better avoid matching functions having different behavior).
- Add 'axis_angle_to_mat4_single',
convenience wrapper for 'axis_angle_to_mat3_single'.
- Replace 'unit_m4(), rotate_m4()' with a single call to 'axis_angle_to_mat4_single'.
We need to check node tree links are still valid, after we remapped
some NodeGroup.
Note: In fact, we have to run that for *all* ID types, since nodes may
use any kind of data-block (in theory)... :/
'1' threshold value would only allow to access a third of the basic
'color space' (from black to white, from 0.0 to 1.0 component values),
when you expect it to access the whole range.
Unfortunately, this needs a subversion bump to allow already defined
brushes to keep exact same behavior!
Also, did not change default value (0.2) for new brushes, think here
keeping current one makes more sense.
Thanks to @LucaRood for confirming the issue.
This has nothing to do here (freeing is not unlinking/remapping!), and
was actually redoing something already taken care of by
`BKE_libblock_relink_ex()` call in `BKE_libblock_free_ex()`.
Also, gives some noticeable speedup when removing datablocks with
do_unlink=True, about 5 to 10% quicker e.g. when deleting all objects
from a py console, in a big production file...
This reverts commit 9b5a32cbfb.
Apparently it is possible to have other thread mocking around with the hash.
Needs deeper investigation, for the time being reverting to prevent crashes.
Added BKE_libblock_free_data_ex() which takes special do_id_user
argument which basically indicates whether main database was already
taken care about not having "dead" pointers.
Gives about 40% speedup of main database free with quadbot scene
(3.4sec vs. 5.4 sec on quite powerful desktop).
This option makes an operator to not push a task to the undo stack if the previous stored elemen is the same operator or part of the same undo group.
The main usage is for animation, so you can change frames to inspect the
poses, and revert the previous pose without having to roll back tons of
"change frame" operator, or even see the undo stack full.
This complements rB13ee9b8e
Design with help by Sergey Sharybin.
Reviewers: sergey, mont29
Reviewed By: mont29, sergey
Subscribers: pyc0d3r, hjalti, Severin, lowercase, brecht, monio, aligorith, hadrien, jbakker
Differential Revision: https://developer.blender.org/D2330
