Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
Except for vertex groups and a few older color types, these
are generally replaced by newer generic attribute types.
Also remove some includes of DNA_mesh_types.h, since it's
included indirectly by BKE_mesh.hh currently.
Remove most includes of this header inside other headers, to remove unnecessary
indirect includes which can have a impact on compile times. In the future we may
want more dedicated "_fwd.hh" headers, but until then, this sticks with the
solution in existing code.
Unfortunately it isn't yet possible to remove the include from `BKE_geometry_set.hh`.
The version of BM_elem_attrs_copy that took a map used a reference
the version without a map didn't, which is fairly confusing.
Pass by pointer now unless this is part of a wider refactor
to move to references everywhere.
Continuation of fix for #115776. Removes attribute copy functions
that calculate the map inline, this is error prone as it's easy to
call these functions from a loop which may result in poor performance.
"mesh" reads much better than "me" since "me" is a different word.
There's no reason to avoid using two more characters here. Replacing
all of these at once is better than encountering it repeatedly and
doing the same change bit by bit.
NDEBUG is part of the C standard and disables asserts. Only this will
now be used to decide if asserts are enabled.
DEBUG was a Blender specific define, that has now been removed.
_DEBUG is a Visual Studio define for builds in Debug configuration.
Blender defines this for all platforms. This is still used in a few
places in the draw code, and in external libraries Bullet and Mantaflow.
Pull Request: https://projects.blender.org/blender/blender/pulls/115774
After previous commits, there is a new function to copy a BMesh
custom data block that doesn't go through the "find common layers
between two formats" code. This is *much* faster when there is a
large amount of layers with the same type, since that code is
quadratic currently. It may not be noticeable in many simpler
setups though.
Related to #115776
For now it has the same implementation as the function that allows
passing separate source and destination custom data formats. But
copying to the same format can potentially be much simpler.
Cleanup talked about in the previous semi-related PR, #114501
- saacos, saasin, sasqrt have been 100% identical to saacosf,
saasinf, sasqrtf since 2012.
- For all the above, there exist more intuitively named safe_acosf,
safe_asinf, safe_sqrtf that do the same thing, so switch all code to those.
Pull Request: https://projects.blender.org/blender/blender/pulls/114593
Design task: #93551
This PR replaces the auto smooth option with a geometry nodes modifier
that sets the sharp edge attribute. This solves a fair number of long-
standing problems related to auto smooth, simplifies the process of
normal computation, and allows Blender to automatically choose between
face, vertex, and face corner normals based on the sharp edge and face
attributes.
Versioning adds a geometry node group to objects with meshes that had
auto-smooth enabled. The modifier can be applied, which also improves
performance.
Auto smooth is now unnecessary to get a combination of sharp and smooth
edges. In general workflows are changed a bit. Separate procedural and
destructive workflows are available. Custom normals can be used
immediately without turning on the removed auto smooth option.
**Procedural**
The node group asset "Smooth by Angle" is the main way to set sharp
normals based on the edge angle. It can be accessed directly in the add
modifier menu. Of course the modifier can be reordered, muted, or
applied like any other, or changed internally like any geometry nodes
modifier.
**Destructive**
Often the sharp edges don't need to be dynamic. This can give better
performance since edge angles don't need to be recalculated. In edit
mode the two operators "Select Sharp Edges" and "Mark Sharp" can be
used. In other modes, the "Shade Smooth by Angle" controls the edge
sharpness directly.
### Breaking API Changes
- `use_auto_smooth` is removed. Face corner normals are now used
automatically if there are mixed smooth vs. not smooth tags. Meshes
now always use custom normals if they exist.
- In Cycles, the lack of the separate auto smooth state makes normals look
triangulated when all faces are shaded smooth.
- `auto_smooth_angle` is removed. Replaced by a modifier (or operator)
controlling the sharp edge attribute. This means the mesh itself
(without an object) doesn't know anything about automatically smoothing
by angle anymore.
- `create_normals_split`, `calc_normals_split`, and `free_normals_split`
are removed, and are replaced by the simpler `Mesh.corner_normals`
collection property. Since it gives access to the normals cache, it
is automatically updated when relevant data changes.
Addons are updated here: https://projects.blender.org/blender/blender-addons/pulls/104609
### Tests
- `geo_node_curves_test_deform_curves_on_surface` has slightly different
results because face corner normals are used instead of interpolated
vertex normals.
- `bf_wavefront_obj_tests` has different export results for one file
which mixed sharp and smooth faces without turning on auto smooth.
- `cycles_mesh_cpu` has one object which is completely flat shaded.
Previously every edge was split before rendering, now it looks triangulated.
Pull Request: https://projects.blender.org/blender/blender/pulls/108014
This replaces the older dynamic c arrays with blender::Vector as
appropriate. Many files required minimal changes and the before/after
are quite similar.
There's 3 remaining usages of the old machinery but those will require
more involved changes and design.
See #103343
Pull Request: https://projects.blender.org/blender/blender/pulls/110981
The hash tables and vector blenlib headers were pulling many more
headers than they actually need, including the C base math header,
our C string API header, and the StringRef header. All of this
potentially slows down compilation and polutes autocomplete
with unrelated information.
Also remove the `ListBase` constructor for `Vector`. It wasn't used
much, and making it easy to use `ListBase` isn't worth it for the
same reasons mentioned above.
It turns out a lot of files depended on indirect includes of
`BLI_string.h` and `BLI_listbase.h`, so those are fixed here.
Pull Request: https://projects.blender.org/blender/blender/pulls/111801
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
Using ClangBuildAnalyzer on the whole Blender build, it was pointing
out that BLI_math.h is the heaviest "header hub" (i.e. non tiny file
that is included a lot).
However, there's very little (actually zero) source files in Blender
that need "all the math" (base, colors, vectors, matrices,
quaternions, intersection, interpolation, statistics, solvers and
time). A common use case is source files needing just vectors, or
just vectors & matrices, or just colors etc. Actually, 181 files
were including the whole math thing without needing it at all.
This change removes BLI_math.h completely, and instead in all the
places that need it, includes BLI_math_vector.h or BLI_math_color.h
and so on.
Change from that:
- BLI_math_color.h was included 1399 times -> now 408 (took 114.0sec
to parse -> now 36.3sec)
- BLI_simd.h 1403 -> 418 (109.7sec -> 34.9sec).
Full rebuild of Blender (Apple M1, Xcode, RelWithDebInfo) is not
affected much (342sec -> 334sec). Most of benefit would be when
someone's changing BLI_simd.h or BLI_math_color.h or similar files,
that now there's 3x fewer files result in a recompile.
Pull Request #110944
Implements the rest of #101689, after 5e9ea9243b.
- `vdata` -> `vert_data`
- `edata` -> `edge_data`
- `pdata` -> `face_data`
- `ldata` -> `loop_data`
A deeper rename of `loop` to `corner` will be proposed as a next
step, and renaming `totvert` and `totedge` can be done separately.
Pull Request: https://projects.blender.org/blender/blender/pulls/110432
Also see #103343.
Couldn't move two files yet:
* `softbody.c`: The corresponding regression test fails. It seems like the
conversion to C++ changes floating point accuracy, but it's not clear where that happens exactly.
* `writeffmpeg.c`: Is a bit more complex to convert because of the static array in `av_err2str`.
Pull Request: https://projects.blender.org/blender/blender/pulls/110182
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
The operator went through quite a bit of trouble to pass a color
attribute index to the operator, but then it always used the offset
from the first layer of the active color attribute's type.
Also remove the "copy domains temp" API function, which
generalized this more than necessary, and exposed the internals
of the custom data system a bit more than we would like.
This adds a new operator: bpy.ops.mesh.flip_quad_tessellation()
This operator rotates the internal loops of the selected quads, allowing
the user to control tessellation without destructively altering the
mesh.
{F14201995}
This operator can be found in the "Face" menu (Ctrl+F) under "Face
Data".
{F14201997}
Reviewed By: campbellbarton, dbystedt
Differential Revision: https://developer.blender.org/D17056
