- Brought back code for particle edit and fluidsim
- Sanitized code from globals and bad level calls,
so its ready to come back working.
- Fixed cirle selecting (Ckey now)
- Enabled undo for editmode curve, armature, particle
and lattice
(another commit following)
The RNA-wrapping for the 'value' (internally kb->curval) was set to be not editable, thus preventing Animato from writing to it. Removing the flag makes shapekeys more functional again (there are still a few non-functional cases).
Added temporary entries to the quick-hack insert-keyframe operator menu. Action Editor doesn't get refreshed properly yet though.
Proper keyingsets will be coming/remimplemented tomorrow or later this week.
In the brief tests I did on a few rigs, this seems to work ok. Martin may want to check on the code for any cleanups that may be needed here.
Coming soon will be some modifications to the primative insert-key operator added earlier, so that Animato can be used to animate characters!
* FModifier data is now allocated correctly, solving crashes on loading files containing IPO-curves with cyclic extrapolation
* Fixed memory leaks with FModifiers and their data not being freed correctly. Not sure exactly why the old code didn't work for this.
* Absolute shapekeys work again. For now, the 'speed' curve isn't converted yet (same goes for 'Curves'). Those were kindof hacky, since they manipulated time in weird ways. Probably the clamping to 0.0-1.0 range can go though.
* Materials, Textures, Cameras, and local-constraint IPO's are now converted properly to the new system
Support for jpeg2000 and writing DCI Cinema standard files.
Notes
* 12 and 16bit channel depths are converted from/to blenders float buffer.
* Grayscale/RGB with alpha supported.
* Theres an option to save color channels as YCC rather then RGB.
* Quality 100 saves lossless
* The UI is a bit weired because of the DCI standards need to be given to the encoder.
- wm draw method is now initialized correct when reading older
files, but the SDNA bug causing the problem is still unsolved.
is due to // char pad[8]; not being recognized as commented.
- triple buffer proxy texture test follows spec better now,
was disabling triple buffer unnecessarily on some drivers.
- some cmake compile fixes related to sequencer pthread usage
and removed bad level calls lib for player.
- show outliner header buttons in oops mode as well until that
can be switched in the UI.
- fix region data free issue for tooltips
- warning fixes
File reading of 2.50 files fixed.
- it now exits nicely from queues without using free'd memory
(checks CTX_wm_window(C) to be NULL)
- code that matched current (ghost) window with new situation
lacked setting a pointer good.
Overall cleaned some parts too; like context clears now all
wm related pointers when you set a new wm, window or area.
Font object + editing back.
Was quite some work due to a myriad of globals all over!
Works nicely 100% local now.
To enable a single textedit operator, I've added a new
keymap entry KM_TEXTEDIT, which gives all keyboard events
to the handler. Also had to add a new keymap-add function
to force a keymap handler in beginning of region handlers.
In future this can be used to prioritize handlers.
Also: split off the arrow keys (frame change) to a separate
region level handler. Can be set with default flag in
regiontype->keymapflag ED_KEYMAP_FRAMES
* Triple Buffer is now more complete:
- Proper handling of window resize, duplicate, etc.
- It now uses 3x3 textures (or less) if the power of two sizes
do not match well. That still has a worst case wast of 23.4%,
but better than 300%.
- It can also use the ARB/NV/EXT_texture_rectangle extension
now, which may be supported on hardware that does not support
ARB_texture_non_power_of_two.
- Gesture, menu and brushe redraws now require no redraws at all
from the area regions. So even on a high poly scene just moving
the paint cursor or opening a menu should be fast.
* Testing can be done by setting the "Window Draw Method" in the
User Preferences in the outliner. "Overlap" is still default,
since "Triple Buffer" has not been tested on computers other than
mine, would like to avoid crashing Blender on startup in case
there is a common bug, but it's ready for testing now.
- For reference "Full" draws the full window each time.
- "Triple Buffer" should work for both swap copy and swap exchange
systems, the latter still need the -E command line option for
"Overlap".
- Resizing and going fullscreen still gives flicker here but no
more than "Full" drawing.
* Partial Redraw was added. ED_region_tag_redraw_partial takes a
rect in window coordinates to define a subarea of the region.
On region draw it will then set glScissor to a smaller area, and
ar->drawrct will always be set to either the partial or full
window rect. The latter can then be used for clipping in the 3D
view or clipping interface drawing. Neither is implemented yet.
Most of the settings have been converted, however, there are a few which are not easy to convert.
* For textures:
- tex->noisedepth - undefined in RNA?
- tex->noisetype - undefined in RNA?
- tex->stype - undefined in RNA?
- tex->noise_basis2 - is noted in RNA as undefined...
* For Cameras:
- "CAM_LENS" define was used for either 'ortho_scale', or 'lens' depending on camera type. This is currently difficult to ascertain using current code... I'll revisit this later
- cam->YF_aperature - undefined in RNA
- cam->YF_dofdist - undefined in RNA
* Fixed bug in with RNA-paths. String identifiers (i.e. some_collection["somekey"]) were not getting handled at all due to wrong indices it seems. I don't know of any other code using this, so hopefully there aren't any unintended bugs caused by this.
This means that bone animation now works again.
* Added a few more sanity checks to file-reading code, and heaps of extra prints everywhere else for debugging purposes (these will be removed in due course).
SEQUENCER_OT_add_duplicate(mode=1)
SEQUENCER_OT_add_image_strip(name='', start_frame=0, channel=1, filename='', replace_sel=True)
SEQUENCER_OT_add_movie_strip(name='', start_frame=0, channel=1, filename='', replace_sel=True)
SEQUENCER_OT_add_sound_strip(name='', start_frame=0, channel=1, filename='', replace_sel=True)
Some of these use the file selector, Note that sound isn't working yet because editsound.c functions are not yet in 2.5 and Operators dont have a way to recieve an array of strings so SEQUENCER_OT_add_image_strip only adds 1 image at the moment.
Added WM Jobs manager
- WM can manage threaded jobs for you; just provide a couple
of components to get it work:
- customdata, free callback for it
- timer step, notifier code
- start callback, update callback
- Once started, each job runs an own timer, and will for
every time step check necessary updates, or close the
job when ready.
- No drawing happens in jobs, that's for notifiers!
- Every job stores an owner pointer, and based on this owner
it will prevent multiple jobs to enter the stack.
Instead it will re-use a running job, signal it to stop
and allow caller to re-initialize it even.
- Check new wm_jobs.c for more explanation. Jobs API is still
under construction.
Fun: BLI_addtail(&wm->jobs, steve); :)
Put Node shader previews back using wmJobs
- Preview calculating is now fully threaded (1 thread still)
- Thanks to new event system + notifiers, you can see
previews update even while dragging sliders!
- Currently it only starts when you change a node setting.
Warning: the thread render shares Node data, so don't delete
nodes while it renders! This topic is on the todo to make safe.
Also:
- bug in region initialize (do_versions) showed channel list in
node editor wrong.
- flagged the channel list 'hidden' now, it was really in the
way! This is for later to work on anyway.
- recoded Render API callbacks so it gets handlers passed on,
no globals to use anymore, remember?
- previewrender code gets now so much nicer! Will remove a lot
of stuff from code soon.
This is work-in-progress patching support for converting animation saved in old system to work in the new one.
* Only IPOs/Actions directly attached to Objects + Shapekeys are converted for now. More types will follow...
* This is currently done as a step outside of do_versions() due to problems with various pointers not having been resolved yet, but which are necessary for correct resolution of issues such as drivers... However, the current code does illustrate how the data should be converted to give best results/compat between the two systems.
* Still need to get the converted data working with depsgraph correctly. Currently, some of my testfiles work, but the BBB files still don't.
cleaned up selection code
new operators:
- highlight file under cursor
- select all/nothing (AKEY)
- border select (BKEY)
changed selection to be invoked by LEFTMOUSE
can transform the strips or move their handles
Still todo, click-drag transform, metastrips support, snapping, markers overlap checks and constrain to valid channels.
Added missing 'break;' 's skipped during the sprint towards the "first working prototype" stage. The temporary Insert Keyframe operator should now work correctly for rotation/scaling keys now by not adding extra keys.
