- added several useful utility functions to editmesh,
these can simplify/clarify a lot of mesh code, check them
out
- cleaned up EdgeSlide a bit to be clearer/shorter
o bug fix, EdgeSlide did not always cancel correctly
o bug fix, EdgeSlide did not choose initial "control" edge
correctly after calc_meshverts_ext change
worked properly with modifiers. Needs more testing I am sure.
No, honestly, I wasn't just cleaning for the hell of it, it
was *necessary* (I would never do such a thing). Selection should
work completely with cage options of modifiers now.
- added DerivedMesh foreach functions to iterate over mapped
verts/edges/face centers. These replaced some of the drawing
functions and are more general anyway. Special edge drawing
functions remain for performance reasons.
- removed EditFace xs, ys fields
- added general functions to iterate over screen coordinates of
mesh/curve/lattice objects
- removed all calc_*verts* functions that were used for storing
screen coordinates in objects. they were recalc'd on the fly
for most situations anyway, so now we just always do that.
calc_*verts_ext was one of those calls that did dirty things
deep down in the callstack (changing curarea and poking at
matrices)
- rewrote all vertex level selection routines (circle, lasso, bbox)
and closest vertex routines (rightmouse select) to use the new
system. This cleaned up the selection code a lot and the structure
of selection is much easier to see now. This is good for future
work on allowing modifiers to completely override the selection
system. It also points out some discrepancies in the way selection
is handled that might be nice to resolve (mesh vertex selection has
fancy stuff to try to help with selecting overlapping, but it only
works w/o bbuf select, and curves/lattices don't have at all).
- had to remove ton's code to move Manipulator to cage location, this
is not reliable (can come up with a different method if requested)
- as it happens BezTriple.s and BPoint.s are basically available to
be removed, just need to rewrite editipo code that still does
background calc of screen coordinates
- MVert.{xs,ys} are still around because they are abused in some places
for other info (not sure if this is safe actually, since they are
short's and the mvert limit went up).
And did I mention this commit is comes out to -305 lines? Well it does.
- switch to using DerivedMesh.drawMappedFaceCentersEM to draw
face dots, still need to do some work so this works in all
selection modes (atm it does not work in no-zbuf mode)
SUBDIV_SELECT_ORIG - Retain selection to look like original selection
SUBDIV_SELECT_INNER - New selection is all the new inner edges
SUBDIV_SELECT_INNER_SEL - New selection is all the new inner edges except where only 1 edges was selected on a face
Loopcut now uses SUBDIV_SELECT_INNER_SEL for better interaction with edgeslide
- add new scene, "Full Copy", didn't copy radio settings
- switch scene didn't reset radiosity baking
(note that you can only do 1 radiosity scene in Blender, switch scene
will free the radiosity data)
Selecting in Mesh edit mode or in FaceSelect mode is tied, but setting
faces hidden was not tied. This caused hidden faces in edit mode to
become selected, with all associated disasters. :)
Now hiding faces in editmode and faceselect are tied too. Please note
that leaving faceselect mode will unhide always!
using bit in pd->flag to signal the use of deformed rather than wasting pd->pad
removing evil cast
replaced by using convertToDispListMesh() ZR: I hope that's OK that way
commented off the ( debug purpose ) recursion trap in SoftBodyDetectCollision()
replaced forbidden okee() with printf() in there
( not so nice, since it does not anounce crash on UI )
note: crashing example from previous commit
needs enabling 'UMS' on panel to crash again
UMS = uses modifier stack
drawMappedEdges
- added DerivedMesh.convertToDispListMeshMapped function which converts and
also returns mapping information for use in editmode
- updated DispListMesh derivedmesh to be able to function in editmode
- update mirror modifier to support use as a cage
- update mirror & subsurf modifiers to properly pass mapping information down
modifier stack
It is now possible to have a mesh with mirror/subsurf modifiers where you
can edit with both as cage. Selecting the mirror'd part works, but of course
transform is flipped so it is a bit weird. Not the cleanest code in the
world and I can't say I am really happy with the architecture but it works for
now and supports the existing feature set.
DLM to share data from DerivedMesh (reduces some copying/memory allocation)
- added displistmesh_copyShared function to copy a DLM but not duplicate any
internal data
- changed crease drawing to use DerivedMesh functions... this means varying
edge width style of creases had to go, I replaced by using varying color to
show crease weight instead. Don't think this is a big loss since the subsurf
result gives you a much better indication of the crease weight anyway.
- bug fix in mirror modifier, didn't copy edge creases from editmesh correctly
works nice & smooth unless we encounter logical circles
well, because of function pointers re-hooking i could not debug that in detail
may be DAG or modifier stack is .. dunno
anyway
did abuse pd->pad bit 1 ( i hope this was 'real' padding till now )
to get SoftBodyDetectCollision(..) use mesh_get_derived_XXX [in effect.c] ..[*sigh* (the linetriangle() func is there)
..]
and put that to the deflection panel (blush .. i would have decapted anyone in my team doing stuff like that)
to defend this commit:
it makes you aware of problems ahead
having code that works/doesn't (on some conditions) is is usefull to look at
i think code is OK , so the problem is either
a. me not understanding
b. real
for locical circles see files -->
http://wund.privat.t-online.de/bt/WorkFine1.blendhttp://wund.privat.t-online.de/bt/WorkFine2.blendhttp://wund.privat.t-online.de/bt/WorkCrash.blend
is in editmode. current bevahaior is to display the object that is
actually in editmode with its modifiers, and all other objects that
share the mesh using just the base editmesh data. this is not 100%
consistent but no architecture at the moment to display all objects
that have mesh in editmode with each individual modifier stack.
may request info from the derived surface, this means we have to
force a manual recalc before we enter transform... proper design
of mesh data invalidation/recalc should make this unnecessary...
- add warning about applying decimation
- some more UI tweaks (rounding of modifier pane, make toggles only in header,
add object name to try to convey that modifier stack is tied to OB)
- bug fix, modifier recalc wasn't done on make link
- bug fix, uiBlockEndAlign didn't clear align flags with certain themes,
pretty sure this wasn't intended. (TON: PLEASE CHECK)
added raycast support for bullet (no triangle-mesh support, soon)
added python methods for 'getHitObject', getRayDirection, getHitPosition and getHitNormal for mouse over sensor,
which makes it easy for a shootout.blend demo :)
- added support for vector icons, from user API side is just like using
a regular icon... on icon side is defined by a function in resources.c
instead of using the blenderbuttons png file. vector icons are much
easier to add and scale properly. intent is that vector icons would
be drawn in window coordinates which lets icon developers make the
most beautiful icons, but this requires some tweaking of the interface
drawing that I am not going to do atm.
- changed BIF_draw_icon* to take coordinates of where to draw icon instead
of using passed in raster position
- switch modifier UI to using vector icons, and tweaked some position and
style stuff.
- replaced most uses of UI_EMBOSSX with UI_EMBOSS (do same thing, just there
to confuse people I guess)
After the window coordinate stuff is sorted out with vector icons
it probably makes sense to move all non-photorealistic icons in blenderbuttons
to vector form just so scaling goes better.
- XCode project
- Scons :
scons stopped working for Os X in the last month (dont know when) :
* the '.' and '..' keywords in CCPPATH
are not recognized anymore for sconscripts compiling files at
a sub level
* when doing a scons clean, the 3 subdirs in build dir are removed
and scons then fail to recreate them (exten, intern, source)
this commit solve the first problem as a temp workaround
for the latter simply recreate the dirs manually
I will investigate that further when on vacations, which i should already
be.
;(
all 3 build systems are now working on Os X
- moved back to editing buttons, where life is now cramped... switched
to constraint style foldout panes, still a WIP. In particular not
sure what buttons should be in header (and if current toggles stay
in header if they should also be in an expanded pane). Also need
new icons for move up/move down (and drag and drop would of course
be nice). Finally current plane is to make it so modifiers will
expand out in modifier pane for horizontal orientations instead of
just going down down down to goblin town.
- added error field to modifiers that is displayed in UI, need to have
some way for modifiers to return errors back to interface (esp. important
for python)
- tweaked cage determination and handling, currently the editmode cage
is determined by last modifier with OnCage set that is preceeded completely
by modifiers that support mapping or are disabled in editmode. it is
kinda confusing, but the interface only lets you toggle OnCage for modifiers
that support it - it just might not be clear all the time why you can't
toggle a certain modifier OnCage.
- update displistmesh_copy to only copy edges if non-NULL
There is a display bug that already existed but is more obvious with
new modifiers where parts of the pane get drawn in a different area
after toggling editmode. It has to do with drawing parts of the interface
using GL instead of 100% buttons. I try to keep my grubby little toes
out of the interface code so this can wait for Ton to return.
- remove python access to Optimal and Subsurf flags (they don't
work this way anymore, I suppose need to replace with python
access to modifiers but not going to do right now).
- removed interface access to OPTIMAL mode, needs to be rethough...
this means at the moment subsurfs outside editmode always draw
and render all edges
