EXR DWAA and DWAB are conceptually similar to lossy JPG compression,
with a tunable file size vs image quality parameter. However, previously
Blender always used the fixed default setting, which is kinda similar
to very high quality (like 97) for JPG.
Internally EXR DWA/DWB quality parameter is inverted scale, i.e. 0 is
best/lossless quality, and increased setting value means decreased
quality. However the rest of Blender UI uses 1-100 JPG-like quality
scale, where values above 90 are "visually lossless", 100 is lossless,
and going below something like 50 would be visually quite lossy. So map
that to internal DWA setting:
- blender 100 -> DWA 0
- blender 97 -> DWA 45
The rest is linear relation based on those two points.
Pull Request: https://projects.blender.org/blender/blender/pulls/128790
Removes unused GPv2 functions in blenkernel.
Notes:
- Functions for layer masks are still in use, but annotations never
have layer masks in the first place. Would be good to remove the data
structures so we can remove the functions too.
- Some multi-frame edit functions are also still nominally used, but
multi-frame editing is not an active feature for annotations. This
should also be removed.
Pull Request: https://projects.blender.org/blender/blender/pulls/128709
Use a generic function to access the home directory making macOS path
access match other Unix systems.
When the function was added [0] it solved access to HOME when the
environment variable wasn't set. Since then support for `getpwuid()`
has been added on UNIX systems [1], which also works on macOS,
removing the need for macOS to have a separate function.
Furthermore BLI_expand_tilde had undocumented limitations that didn't
apply to other platforms (see PR for details).
Ref !128734
[0]: 9df13fba69
[1]: 6039cb17e6
IMB_scale modifies the input image. But some places in code needed to keep
original input intact, so what they did was a sequence of IMB_dupImBuf+IMB_scale
Add IMB_scale_into_new function and use that in several obvious places:
- movieclip_build_proxy_ibuf
- icon_copy_rect
- seq_proxy_build_frame
Rebuilding proxies for VSE image sequences with 94 4K resolution EXR images
(on Ryzen 5950X/Win10/VS2022): 13.4 -> 10.3 seconds.
Pull Request: https://projects.blender.org/blender/blender/pulls/128752
Reset the 'hierarchy index' runtime `temp_index` value for all library IDs.
This prevent the assert to be triggered when trying to rebuild libraries
hierarchy and there are some orphaned (i.e. not used by anything) library IDs
around.
This was located in BKE_appdir which is higher level
(used for accessing Blender's paths), where as the home directory
may be accessed from lower level path code.
This wasn't working because the code that stores the backup up the current pose
looped over the pose asset's fcurve listbase to determine which bones needed to
be backed up. When the pose asset was stored as a slotted action, that listbase
was always empty, so nothing was backed up. This resulted in exploding poses as
the pose was repeatedly applied on top of itself, and in debug builds would
trigger asserts in code that was sanity-checking quaternion values.
This PR updates that code to loop over the fcurves of the first slot when the
pose asset is stored as a slotted action, which in turn makes pose blending
work as expected with slotted actions.
Pull Request: https://projects.blender.org/blender/blender/pulls/128686
This catches the exception and shows the error message to the user.
We don't have much control over the error message here currently. Better just
report it for now. In the future we could try to detect what error it is exactly
and produce a more user friendly error.
This refactors the lifetime analysis of anonymous attributes in geometry nodes.
The refactor has a couple of goals:
* Use a better and simpler abstraction that can be used when building the
lazy-function graph. We currently have a bunch of duplicate code to handle
"field source" and "caller propagation" attributes. This is now unified so
that one only has to worry about one kind of "reference sets".
* Make the abstraction compatible with handling bundles and closures in case we
want to support them in the future. Both types can contain geometries and
fields so they need to be taken into account when determining lifetimes.
* Make more parts independent of the concept of "anonymous attributes". In
theory, there could be more kinds of referenced data whose lifetimes need to
be managed. I don't have any concrete plans for adding any though.
At its core, deterministic anonymous attributes still work the same they have
been since they became deterministic [0]. Even the generated lazy-function graph
is still pretty much or even exactly the same as before.
The patch renames `AnonymousAttributeSet` to the more general
`GeometryNodesReferenceSet` which is more. This also makes more places
independent of the concept of anonymous attributes. Functionally, this still the
same though. It's only used in the internals of geometry nodes nowadays. Most
code just gets an `AttributeFilter` that is based on it.
[0]: https://archive.blender.org/developer/D16858
Pull Request: https://projects.blender.org/blender/blender/pulls/128667
`ActionSlot::idtype` needs some extra care when reading from a blend
file. Blender's generic endian switching needs to be un-done, as the
ID type values are not numerically the same between little and big
endian machines. Due to the way they are defined, they are always in
the same byte order, regardless of hardware/platform endianness.
This is the same for Action Slots as #128129 does for Actions, except
that Action Slots use a `int16_t` instead of `short` and thus don't
need a cast.
Pull Request: https://projects.blender.org/blender/blender/pulls/128438
This was already done in GHOST, but not BKE_appdir_folder_home.
Also null check the return value from getpwuid() as it's not
guaranteed to be non-null.
This renames the mode identifiers to be consistent with e.g. the context mode identifiers and other names used for the new Grease Pencil.
For `object.mode`:
* `PAINT_GPENCIL` -> `PAINT_GREASE_PENCIL`
* `SCULPT_GPENCIL` -> `SCULPT_GREASE_PENCIL`
* `VERTEX_GPENCIL` -> `VERTEX_GREASE_PENCIL`
* `WEIGHT_GPENCIL` -> `WEIGHT_GREASE_PENCIL`
For the internal `ob->mode` flag:
* `OB_MODE_PAINT_GPENCIL_LEGACY` -> `OB_MODE_PAINT_GREASE_PENCIL`
* `OB_MODE_SCULPT_GPENCIL_LEGACY` -> `OB_MODE_SCULPT_GREASE_PENCIL`
* `OB_MODE_VERTEX_GPENCIL_LEGACY` -> `OB_MODE_VERTEX_GREASE_PENCIL`
* `OB_MODE_WEIGHT_GPENCIL_LEGACY` -> `OB_MODE_WEIGHT_GREASE_PENCIL`
Resolves#127374.
Pull Request: https://projects.blender.org/blender/blender/pulls/128604
Instead of calling `BKE_nlastrip_new()` (which, due to backward compat
reasons automatically picks a slot), the Push Down operator now calls
`BKE_nlastrip_new_for_slot()`, which explicitly assigns the given slot.
On top of that, the frame range of the slot is used to set the strip's
frame range (instead of the range of the entire Action).
Pull Request: https://projects.blender.org/blender/blender/pulls/128444
Instead of using direct property manipulation to enter tweak mode, use
the regular `animrig::assign_…` functions. When used in the right order,
as introduced in this commit, the "disallow assigning an Action in tweak
mode" logic can just stay simple as it is.
Enabling render cropping while using the GPU compositor can cause the
render to be distorted in certain resolution and border configurations.
This is due to a difference in how the compositor and the render
pipeline compute the effective bordered size of the render. While
mathematically identical, difference in rounding can cause off by one
errors in the computed size. The render pipeline computes the integer
bounds of the border then computes the size from that, while the
compositor multiplies the float size of the border to the full size of
the render.
To fix this, we adjust the BKE_render_resolution function to compute the
border size using integer bounds like the render pipeline, which is the
function used by the compositor. The cropped version of that function is
used in two other places in the image editor for displaying render
results, so we should expect no difference in outputs with minimal but
more accurate difference in display.
Pull Request: https://projects.blender.org/blender/blender/pulls/128576
BLI_scanfill could remove edges later needed for feathering,
although this would only occur in specific cases.
Resolve by storing edges before triangle filling.
Part of: https://projects.blender.org/blender/blender/issues/128066
Adds a "Filter by Active Tool" option for the brush asset shelves,
enabled by default. If enabled, the asset shelf only shows brushes
matching the brush type of the current tool. If the general "Brush" tool
is active, only brushes that are not covered by another tool are
displayed. The popup brush selector always shows all assets.
The option is stored in the Preferences, toggled in the "Display
Settings" popover of the asset shelf.
Note: This is committed to the 4.3 release branch, which was discussed
in advance.
Pull Request: https://projects.blender.org/blender/blender/pulls/128450
The crash was caused by infinite recursion. When recursing into sub-strips
of an NLA strip, it helps to actually recurse with the pointer to that
sub-strip.
Pull Request: https://projects.blender.org/blender/blender/pulls/128492
