Safe method to move render results to the displayed image.
It now allocates a single image for display, and on each
refresh callback from render, it copies the refreshed
section over to this image, in 32 bits. While rendering
that image then only shows progress updates, as usual.
This also now works for scenes in composte and results
for composite.
This should solve reported crashes for MBlur or SSS.
* Fixed context iterators for PoseChannels. The actual selection test was missing (but layer visibility was getting checked). Also added check for hidden bones here too.
* Removed unnecessary defines added by mfoxdogg in BKE_context.h
* Removed the old hacks in 'Clear ...' operators for ensuring that object animation (ipos/actions) don't overwrite poses. These are no longer necessary, since normal animation calculation is only done in a separate step on frame-changes now.
* Removed the manual checks for layer visibility from 'Clear ...' operators, since that's taken care of by context iterators.
*******
-ported clear loc,rot,scale operators to pose mode operators
- for some reason when animated and you clear anything, the whole aramture clears. somthing to do with the depsgraph stuff that was directly ported from clear armature()
* Added selected, selected+editable, and active to access EditBones for Armature Operators to use. These take into account X-Axis Mirror too, so there is really no need to check that sort of thing anymore in tools.
* Added a quick testing operator for verifying that these loops filter the data correctly. I've dumped this in armature_ops.c for now. It can be activated using the TKEY hotkey in Armature EditMode only. This should be removed once we have a few more functional tools.
* Ported over cleaned up roll-calculation tools from AnimSys2
* Removed a few ugly stubs from posemode code
* Removed RNA for old multires in Mesh, the old mesh->mr struct should never be used (except for loading old files)
* Dealt with sculpt + render (just needed to force multires update)
* sculpt memory leaks fixed
* Entering editmode now always exits paint modes (previously, only happened if editmode was called from the header button)
Render back! And not only back, even full threaded now. :)
Current state is unfinished, but too much fun to not to
commit for review and test!
WARNING: because render is in a threaded job, it will
use data as can be edited in the UI. That'll crash in many
cases of course... the idea is to limit UI usage to viewing
stuff, especially for the Image Window to inspect layers
or zoom in/out.
What works now;
- F12 render (no anim)
- ESC from render
- ESC pushes back temporary Image Window
- Render to ImageWindow or full-screen.
- Executing composites, and edit composites after render.
Note that the UI is 100% responsive in a render, you can
switch screens, slide area dividers around, or even load
a new file during render. :) It's quite stable even.
I'll collect all crash reports especially to get a good
picture of where the protection is required at least.
Also added: XKey "Delete Objects", to get things crash...
unfortunately it didn't for me.
* Changed uiPupMenuOperator usage to uiPupMenuBegin/End (simpler,
no need to build a string). Also made transform orientation and
subdiv type enums instead of ints for this.
* Added an icon argument to many of the uiMenu calls, and added a
uiMenuItemIntO.
* Move auto rna button creation out of outliner code, now is
uiDefAutoButR for individual buttons and uiDefAutoButsRNA for a
whole block.
* Implemented uiPupBlock(O). Pressing F6 gives a menu with the
properties of the last operator to test. I tried to make a redo
last operator out of this but couldn't get the context correct
for the operator to repeat in. Further the popup block also has
some issues getting closed while editing buttons.
* Fix uiAfterFunc memory leak on Ctrl+Q quit.
* Fix handling of RNA number button dragging and sliding for RNA
buttons with range -inf/inf.
* Added examples of how to patch up MTex adrcodes for Animato. It appears many of the settings there in RNA are still undefined though!
* Added undo push for the Outliner tweaks I made
* Removed some outdated comment
* Outliner 'select' (i.e. blue/grey highlights for tree items) works again in both normal Outliner + RNA views.
* Fixed bugs/MSVC warnings in animation code
*****
fixed up the view navigation menu using the enumitems call, also made view numpad's enum "type" instead of "view" to be more inline with other operators and rest of blender
As creator of the Ipo I also reserve to right to kick it out
definitely :) To honour the wonderful contributions from Joshua
here it is; renamed space_ipo to space_graph!
Note; make, cmake and scons should work, msvc will require some
work now!
- removed undefined operators from view3d menu, the error prints
("undefined operator") is currently a real error; later on when
operators are more dynamically defined it can be feature.
- made uiMenuContext() work locally, only on the items as defined
after this call.
*******
- rebuilt most of the view menu with a couple empty sub menus
- seperators go all screwy when there is an unknown operator in the menu
- using this method, the operators invoke function is skipped, this is evident with clipping border and border zoom
- original menus are still in the code just if'd out for furture reference and such
- to cater for this menu, view numpad op has been made into much smaller atomic operators, pan and orbit and the ortho/persp toggle has been put into individual operators
- fixed the mem leak in the make parent menu
* RNA_blender.h is now generated along with the other files. It is not
used anywhere yet, and still located quite hidden next to the other
rna_*_gen.c files. Read only access for now.
* Inherited properties are not copied from the base anymore but
iterated over. Patch by Vekoon, thanks!
* Array get/set callbacks now do the whole array instead of getting an
index. This is needed for some layers for example so python can set
the array as a whole, otherwise the check that one layer has to be
enabled at all times gets in the way. Also nicer for the C API.
* Also some changes to returning pointers to make the API cleaner, got
rid of the type() callback and instead let get() return PointerRNA
with the type included.
The C API looks like this currently:
http://users.pandora.be/blendix/RNA_blender.h
Editmesh ops:
- MESH_OT_select_multi_loop
(based on selection it makes loops)
- MESH_OT_select_linked
added boolean 'limit' for linked limited by seams
- MESH_OT_select_linked_pick
same as above
The 'limit' option used to work only for facemode,
with a toolsettings option.
So it had no own hotkey... i made it work for
edges & vertices too, need to find hotkey later.
Sanitized the 'tweak' event.
Original idea was to have WM event system generating it
automatically. However, I first tested it via a handler
and operator, to check what kind of configurations would
be useful. It appeared to not work nice, also because
that inserting a tweak operator in a keymap is confusing.
Now 'tweaks' are generated automatically, and can be
catched by keymaps as any event. The current definition
of tweak is:
- if Left/Middle/Rightmouse pressed
if event wasn't handled by window queue (modal handlers)
start checking mousepositions
- while mousepositions are checked
- escape on any event other than mouse
- on mouse events:
- add tweak event if mousemove > 10 pixels
- stop checking for tweak if mousebutton released
- Tweak events have a define indicating mousebutton used
EVT_TWEAK_L, EVT_TWEAK_M, EVT_TWEAK_R
- In keymap definitions you can use _S or _A to map to
action or select mouse userdef.
- Event value in keymap should be KM_ANY for all tweaks,
or use one of the eight directions:
EVT_GESTURE_E, _SE, _S, _SW, _W, _NW, _N, _NE
- And of course you can add modifier checks in keymaps for it.
- Because tweaks are a result of mouse events, the handlers get
both to evaluate. That means that RMB-select + tweak will work
correctly.
In case you don't want both to be handled, for example the
CTRL+LMB 'extrude' and CTRL+LMB-tweak 'lasso select', you will
need to set the first acting on a EVT_RELEASE, this event only
gets passed on when tweak fails.
The current system allows all options, configurable, we had in 2.48,
and many more! A diagram of what's possible is on the todo. :)
Also in this commit: lasso select editmesh failed with 'zbuffer
occluded select'. Also circle-select failed.
It's about time that the RNA wrapping for various parts of the animation system were cleaned up for my recent changes. I've moved some code around (and/or deleted a file or two) in the process.
Committed two posemode operators. Hide/Unhide.
For people who want to check on adding operators, only
check the changes in armature directory, rest is to
get things to work, and a small bugfix :)
Hrmf, I try to make a local operator-only commit possible, but I
keep finding other small todos :)
- added two more standard poll callbacks for pose and armature
- fixed operator naming in editmesh_mods.c
Since these values defaulted to zero, a NULL default array will do, but for new operators that need to be initialized from an array, only static arrays should be used.
Paint mode (VPaint WPaint) was too easy to enter, I made the
operators having a more designated poll() to check stuff.
Now CTRL+TAB hotkeys will work in editmode for select type,
and outside editmode for wpaint or posemode.
Also fixed select type operator to so it works for facemode.
Moved 'redo last operator' stuff to WM level, with a
WM_operator_repeat()
Code in screen_ops was not checking all operator stuff
correctly, so repeat menu (F3 now) crashed in cases.
Rather then having a hard coded popup menu with events that call other operators exec functions, operator names are given to the toolbox where it displays the operator name and shortcut.
This means the real operator is registered rather then the one that called it.
Im not sure about the location for the operator though, at the moment its called VIEW3D_OT_editmesh_face_toolbox() in view3d_header.c since the image editor toolbox is in the header file too.
In a way it makes sense because this menu should eventually be in the header.
- Change shortcut to Ctrl+F as it is in 2.4x
- Added a number of operators that were not being registered - MESH_OT_fill_mesh, beauty_fill, convert_quads_to_tris, convert_tris_to_quads, edge_flip, mesh_set_smooth_faces, mesh_set_solid_faces
- Renamed redundant MESH_OT_mesh_set_smooth_faces() to MESH_OT_faces_shade_smooth(), same for solid.
- Renamed MESH_OT_mesh_selection_mode_menu to MESH_OT_mesh_selection_type since the operator doesnt have to be accessed from a menu.
Shaul, you might want to look over this, using enums means WM_menu_invoke can be used instead of writing an invoke function for each operator.
Added error messages to WM_menu_invoke if no enum "type" property is found.
Big commit, but mainly adminstration.
- Enabled ot->flag OPTYPE_UNDO to work.
- Removed all redundant ED_undo_pushes, but I'd
recommend everyone to check it while testing. :)
- Added view manipulations as OPTYPE_REGISTER,
although this will flood the redo stack a bit...
Nevertheless; for a "redo last action" panel we
can simply check if both flags are set for redo.
- Bugfix in editmode undo: selectmode was cleared,
so you couldn't select after undo
- Bugfix in mixing tweaks and keymaps... solution
works but is weak, need to think over a while.
Edit Mesh
Added the two other 'select similar' ops, for edge and face.
For testing fun I've put these ones as first keys using the
modifier order feature. So it's now:
SHIFT+G : similar vertex
CTRL+SHIFT+G: similar edge
SHIFT+CTRL+G: similar face
Not very useful here; but I think this can work well to map
a double amount of options under mouseclicks. Power user
config stuff!
Edit Mesh
- "Select Similar" for vertices back.
(Put under Jkey for now)
- renamed operator righthand_faces to consistant_normals
gave it boolean property for 'inside'.
Fake commit, but for history I have to write the log!
Fixed CTRL+Q quit-blender. It was using ancient code
still, and since I always use APPLE+Q I never noticed :)
Edit Mesh:
- Added back "Edge Shortest Path select"
It now also does regular selection, more fun!
It's mapped to CTRL+click now, and makes or clears selections
between current and previously activated edge.
Seam/Sharp/etc marking is a toolsetting mode still. These
options cannot become properties easily, because the tool
uses the properties of selected edge to clear...
- Removed a whole bunch of G.f flags, related to mesh drawing.
It's all now local in me->drawflags. Here's the list of
removed old globals:
G_DRAWEDGES
G_DRAWFACES
G_DRAWNORMALS
G_DRAW_VNORMALS
G_ALLEDGES
G_HIDDENEDGES
G_DRAWCREASES
G_DRAWSEAMS
G_DRAWSHARP
G_DRAWBWEIGHTS
G_DRAW_EDGELEN
G_DRAW_FACEAREA
G_DRAW_EDGEANG
Edit mesh:
- fixed compile, shul only committed the function declaration, not
the code for 'make fgon'.
- Put the Fgon option under:
ALT+F: make fgon
SHIFT+ALT+F: clear fgon
(note, SHIFT+F = fill :)
- Fixed loop select to use two booleans, as Martin pointed me
correctly at! Using 1 variable was lazy coding.
