Before rBa8a454287a27, edge creases were copied to the result mesh as
part of `MEdge`. Now they are stored in a separate `CD_CREASE` layer,
which I mistakenly disabled for interpolation. However, to maintain
the geometry node uses a field input, remove the interpolated attribute
there.
**Empty Slot Fix**
Currently the boolean modifier transfers the default material from
meshes with no materials and empty material slots to the faces on the
base mesh. I added this in a2d59b2dac9e for the sake of consistency,
but the behavior is actually not useful at all. The default empty
material isn't chosen by users, it just signifies "nothing," so when
it replaces a material chosen by users, it feels like a bug.
This commit corrects that behavior by only transferring materials from
non-empty material slots. The implementation is now consistent between
exact mode of the boolean modifier and the geometry node.
**Index-Based Option**
"Index-based" is the new default material method for the boolean
modifier, to access the old behavior from before the breaking commit.
a2d59b2dac9e actually broke some Boolean workflows fundamentally, since
it was important to set up matching slot indices on each operand. That
isn't the cleanest workflow, and it breaks when materials change
procedurally, but historically that hasn't been a problem. The
"transfer" behavior transfers all materials except for empty slots,
but the fundamental problem is that there isn't a good way to specify
the result materials besides using the slot indices.
Even then, the transfer option is a bit more intuitive and useful for
some simpler situations, and it allows accessing the behavior that has
been in 3.2 and 3.3 for a long time, so it's also left in as an option.
The geometry node doesn't get this new option, in the hope that we'll
find a better solution in the future.
Differential Revision: https://developer.blender.org/D16187
Based on discussion in D10891, this node isn't meant to be exposed and
may be removed in the future. The fact that it was exposed in search
menus was a mistake from the implementation of link-drag-search
and bdb5754147.
I explicitly removed the link drag search implementation, and added
(Legacy) to the node name which hides it from the add node search.
`GeometrySet::has()` can return an empty component. It's more convenient
if it doesn't, since other code rarely wants to access an empty component.
The alternative would be adding an `is_empty()` check in the lazy function
for the viewer node, that would work fine too, for this case.
Differential Revision: https://developer.blender.org/D16584
I18n: make a few messages translatable
* Missing Paths * in the Presets menu when no preset exists yet.
The White Noise entry in the Add Node menu is the only one lacking a "Texture" suffix, which doesn't seem justified since the node itself is already called "White Noise Texture". Rename the entry its name can be extracted and used for the node--and for consistency.
New object material node names (Principled BSDF, Material Output) come from a preset node tree. The nodes' names need to be translated after creation.
Extract the "Fallback Tool" pie menu title.
Translate grease pencil options in the viewport overlay menu.
Ref T102030.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16345
When dragging out a boolean noodle, releasing and choosing
'switch > Switch' from the search popup, the code would mistakenly
search for 'Start' instead of 'Switch'.
Also the function called was not exactly the right one, leading to the
node being marked as invalid.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D16512
Correct trim for cyclical curves mentioned in T101379, splitting the
curves if the start/endpoint is at the 'loop point'.
Correct implementation based on comments in D14481, request was made to
use 'foreach_curve_by_type' to computing the point lookups.
Included corrections from D16066 as it may not be a adopted solution.
Exposed selection input by adding it as input to the node.
Note: This is disabled for 3.4 to avoid making UI changes in Bcon3.
Differential Revision: https://developer.blender.org/D16161
The preferred domain is used to decide which domain the viewer node
should use when set to "Auto" domain. This commit adds it to some curve
input nodes and the curve and mesh topology nodes. This makes debugging
node setups with these nodes a bit faster and less frustrating.
The "all curve" sampling is implemented as two functions internally.
The first finds which curve each "global" sample should be on. Then
the second is the regular evaluation and sampling in that curve.
The first operations creates lengths, but they were processed as
factors when passed to the second function.
The node has always be a bit confusing for the NURBS case, since it
uses the distance between control points since the evaluated/control
point mapping isn't obvious, but it also went above 1, which wasn't
correct.
Instead, retrieve the total length from the point lengths calculated
in the previous step. The results should be the same for other curve
types.
The new Xcode 14.1 brings the new Apple Clang compiler which
considers sprintf unsafe and geenrates deprecation warnings
suggesting to sue snprintf instead. This only happens for C++
code by default, and C code can still use sprintf without any
warning.
This changes does the following:
- Whenever is trivial replace sprintf() with BLI_snprintf.
- For all other cases use the newly introduced BLI_sprintf
which is a wrapper around sprintf() but without warning.
There is a discouragement note in the BLI_sprintf comment to
suggest use of BLI_snprintf when the size is known.
Differential Revision: https://developer.blender.org/D16410
The goal is to improve clarity and readability, without
introducing big design changes.
Follows the recent obmat to object_to_world refactor: the
similar naming is used, and it is a run-time only rename,
meaning, there is no affect on .blend files.
This patch does not touch the redundant inversions. Those
can be removed in almost (if not all) cases, but it would
be the best to do it as a separate change.
Differential Revision: https://developer.blender.org/D16367
As described in T92474 and T91650, this patch adds two features to the
sample curve node. First is an index input, to allow choosing the curve
to sample for each point. Second is a custom field input, which is
evaluated on the control points of the curve and then sampled like the
other outputs. There is an "All Curves" option for the old behavior
which takes the length of all curves into account.
For invalid curve indices, the node outputs zeros (default values).
Invalid lengths and factors are clamped.
There have been various discussions about splitting the node up more,
but this is an intuitive combination of options and will work well
enough for current use cases. The node could still be generalized more
in the future.
Keep in mind that the source field is evaluated on curve control points,
not the evaluated points used for sampling. This is necessary so that
fields like "Index" work as expected.
Differential Revision: https://developer.blender.org/D16147
Motivation is to disambiguate on the naming level what the matrix
actually means. It is very easy to understand the meaning backwards,
especially since in Python the name goes the opposite way (it is
called `world_matrix` in the Python API).
It is important to disambiguate the naming without making developers
to look into the comment in the header file (which is also not super
clear either). Additionally, more clear naming facilitates the unit
verification (or, in this case, space validation) when reading an
expression.
This patch calls the matrix `object_to_world` which makes it clear
from the local code what is it exactly going on. This is only done
on DNA level, and a lot of local variables still follow the old
naming.
A DNA rename is setup in a way that there is no change on the file
level, so there should be no regressions at all.
The possibility is to add `_matrix` or `_mat` suffix to the name
to make it explicit that it is a matrix. Although, not sure if it
really helps the readability, or is it something redundant.
Differential Revision: https://developer.blender.org/D16328
Retrieve the surface UV coordinates with the attribute API instead of
the helper function. This allows more flexibility of data types (and
domains), which is helpful especially because geometry nodes
can't write 2D vectors yet.
This patch implements the normalize node for the realtime compositor.
Differential Revision: https://developer.blender.org/D16279
Reviewed By: Clement Foucault
This patch implements the tone map node for the realtime compositor
based on the two papers:
Reinhard, Erik, et al. "Photographic tone reproduction for digital
images." Proceedings of the 29th annual conference on Computer graphics
and interactive techniques. 2002.
Reinhard, Erik, and Kate Devlin. "Dynamic range reduction inspired by
photoreceptor physiology." IEEE transactions on visualization and
computer graphics 11.1 (2005): 13-24.
The original implementation should be revisited later due to apparent
incompatibilities with the reference papers, which makes the operation
less useful.
Differential Revision: https://developer.blender.org/D16306
Reviewed By: Clement Foucault
Attribute copying often uses identical logic for copying selected
elements or copying with an index map. Instead of reimplementing
this in each file, use the common implementation in the array_utils
namespace. This makes the commonality more obvious, gives improved
performance (this implementation is multithreaded), reduces binary
size (I observed a 173KB reduction), and probably reduces compile time.
String attributes are intentionally not fully supported in geometry nodes
yet because more design work is necessary to decide how they should behave.
For now just disable handling string attributes to avoid crashes.
There might be more or fewer curves in the input to the deform curves on
surface node than the original, so the curve's surface UV coordinates
need to be retrieved from the original curves.
A vertex might be connected to no edges or no faces. Most of these nodes
worked fine in that case, but we might as well make that explicit
and skip the sorting anyway.
This makes instance handling more consistent with all the other geometry
component types. For example, `MeshComponent` contains a `Mesh *` and
now `InstancesComponent` has a `Instances *`.
Differential Revision: https://developer.blender.org/D16137
Resolve by setting no_muted_links() on Factor sockets.
Same issue as T101613
Reviewed By: HooglyBoogly
Differential Revision: https://developer.blender.org/D16153
Currently, the scale node always changes the interpolation of its result
to bilinear. This was done because the scale node does not have an
interpolation option, unlike the Transform node, so a default of
bilinear was assumed. This turned out to be problematic, because in the
pixelation use cases, a nearest interpolation is typically preferred by
the user.
This patch changes the default interpolation of input nodes to bilinear,
makes the scale node keep the interpolation of the input it receives,
and makes the pixelate node changes the interpolation to nearest. In
effect, for non-pixelation use cases, the default bilinear interpolation
will be used, and for pixelation use cases, the nearest interpolation
will be used unless explicitly specified using a node that sets the
interpolation.
Currently there is no way to tell that these node types are deprecated
in the UI. This commit adds "(Legacy)" to the end of the names.
It also makes it simple to skip these in the various node searches
more automatically than before.
Fixes T101700
Differential Revision: https://developer.blender.org/D16223
Besides texture nodes, which aren't supported anyway, we don't have any
builtin nodes that still use the socket template system, so this can be
removed.
This lowers the search weight for color-specific
mix functions on non-color sockets.
Reported in blender.chat by simonthommes
Differential Revision: https://developer.blender.org/D16228
This patch implements the variable size blur option in the Bokeh Blur
node. The implementation is different from the CPU one in that it also
takes the Bounding Box input into account, which is ignored for some
reason for the CPU. Additionally, this implementation does not do the
optimization where the search radius is limited relative to the maximum
value in the size texture. That's because the cost of computing the
maximum is not worth it for most use cases.
The reference implementation does three unexpected things that are
replicated here nonetheless. First, the center bokeh weight is always
ignored and assumed to be 1. Second the size of the center pixel is
taken into account. Third, a unidimensional distance is used instead of
a 2D euclidean one. Those need to be considered independently.
Differential Revision: https://developer.blender.org/D16185
Reviewed By: Clement Foucault
