A temporary string was created in the attribute_foreach callback
and used in a map at a higher scope. When the callback finished,
the string went out of scope, was freed, then the elements in the
set pointed to freed memory.
After applying the pose breakdowner,
the "factor" slider in the redo panel wasn't set to the correct value
This would cause the pose to jump around
once you start dragging the slider
Reviewed by: Sybren A. Stüvel
Differential Revision: https://developer.blender.org/D12187
Ref: D12187
This commit fully refactors the way linked IDs are made local when
appended.
Previously, `BKE_library_make_local` was (ab)used for this task, but it
was missing some contextual data and doing complex processing to try to
work around this, with limited sucess. Further more, it was nearly
impossibe to extend (e.g. to get new append behaviors necessary for the
asset project).
The new code is a dedicated append step in WM linking process.
NOTE: BPY API (`libray.load()` context manager) uses its own code here,
which still relies on `BKE_library_make_local` for appending.
Unfortunately, merging those two different code paths is not trivial so
for now this API will remain unchanged.
Fix T55629: Append already linked Data is impossible.
Current `BKE_libblock_relink_to_newid` is using its own simplistic,
limited and not really correct version of ID remapping.
While doing a full replacement would have been ideal, this is
risky/time-constrained for Blender 3.0 release, so for now we'll have
both versions co-existing.
Previously, it was necessary to rebuild the node declaration
every time it was used. Now it is cached per node for easy
and fast access.
For more details on what this is, look at the comment in
`DNA_node_types.h`.
Differential Revision: https://developer.blender.org/D12471
Previously, a debug name had to be passed to all methods
that added a resource to the `ResourceScope`. The idea was
that this would make it easier to find certain bugs. In reality
I never found this to be useful, and it was mostly annoying.
The thing is, something that is in a resource scope never leaks
(unless the resource scope is not destructed of course).
Removing the name parameter makes the structure easier to use.
Sometimes not all outputs of a multi-function are required by the
caller. In those cases it would be a waste of compute resources
to calculate the unused values anyway. Now, the caller of a
multi-function can specify when a specific output is not used.
The called function can check if an output is unused and may
ignore it. Multi-functions can still computed unused outputs as
before if they don't want to check if a specific output is unused.
The multi-function procedure system has been updated to support
ignored outputs in call instructions. An ignored output just has no
variable assigned to it.
The field system has been updated to generate a multi-function
procedure where unused outputs are ignored.
In contrast to the Filebrowser, the Outliner (Blender File view) did not
distinguish icons for text-based formats (if they have a filepath this
can be done though).
Maniphest Tasks: T90862
Differential Revision: https://developer.blender.org/D12347
This allow users to show/hide:
* Library name / refresh.
* Assets names.
* Filter.
To set them in Python use:
display_options={'NO_NAMES', 'NO_FILTER', 'NO_LIBRARY'}
With contributions by Julian Eisel.
Differential Revision: https://developer.blender.org/D12476
Curve Points of handle of type `Auto` on curves not uniformly scaled
cause the shape of the curve to be modified after applying the scale.
So change these handles to `Aligned` in these cases.
Reviewed By: campbellbarton
Maniphest Tasks: T90736
Differential Revision: https://developer.blender.org/D12281
Changing active side was introduced in {rB7ff6bfd1e0af} but was never
working for tools/operators other than the sculpt line mask tool.
While for most tools/operators this actually does not make sense, the
bisect tool/operator can actually benefit from it.
thx @campbellbarton for additional input!
Maniphest Tasks: T91320
Differential Revision: https://developer.blender.org/D12473
This was implemented in {rB14d56b4217f8} but was never working for
tools/operators other than the sculpt line mask tool.
To be precise, the preview actually snapped but the operations (e.g.
mesh bisect, vertex weight gradient) still happened "unsnapped" in
modal. For the sculpt line mask tool this wasnt a problem, because it
only draws a preview while modal, the actual mask was only applied
later.
This solves part one of T91320 (snapping), sculpting also introduced
flipping in {rB7ff6bfd1e0af} which does not make much sense for all
tools, but in bisect this could actually be supported, will add that in
a separate Diff.
ref T91320
Maniphest Tasks: T91320
Differential Revision: https://developer.blender.org/D12470
* Splash Disable
* Show gizmo navigate
* ui scale
It is a bit arbritrary now. So those are the flags I'm
setting up for the Blender 101 project (T90025).
Differential Revision: https://developer.blender.org/D12474
Introduced `BKE_packedfile_unpack` that is called from the specialized
implementation for Image, Sound, Font, Volume etc. This is in
preparation for T91252.
Instead of comparing the referenced field node by pointer,
compare the nodes directly instead. This is important
because different field nodes might be the same semantically.
Creating some primitives allows for a scale value (via python) that will
scale the object accordingly. For objects with a radius parameter
(like cylinders, spheres, etc.) passing a scale different to (1,1,1)
would result in unexpected behavior.
For example:
`>>> bpy.ops.mesh.primitive_uv_sphere_add(radius=2, scale=(1,1,2))`
We would expect this to create a sphere with a radius of 2
(dimensions 4,4,4) and then be scaled *2 along the z-axis
(dimensions 4,4,8). But this would previously create a scaled sphere
with dimensions (2,2,4).
The scale was simply divided by two. Maybe because the "radius"
parameter for creating the primitives was confusingly named "diameter"
(but used as the radius).
The fix adds a scale parameter to `ED_object_new_primitive_matrix`
and also renames the wrongly named "diameter" parameters to "radius".
Reviewed By: campbellbarton
Maniphest Tasks: T84638
Ref D10093
With this commit, curve objects support the geometry nodes modifier.
Curves objects now evaluate to `CurveEval` unless there was a previous
implicit conversion (tessellating modifiers, mesh modifiers, or the
settings in the curve "Geometry" panel). In the new code, curves are
only considered to be the wire edges-- any generated surface is a mesh
instead, stored in the evaluated geometry set.
The consolidation of concepts mentioned above allows remove a lot of
code that had to do with maintaining the `DispList` type temporarily
for modifiers and rendering. Instead, render engines see a separate
object for the mesh from the mesh geometry component, and when the
curve object evaluates to a curve, the `CurveEval` is always used for
drawing wire edges.
However, currently the `DispList` type is still maintained and used as
an intermediate step in implicit mesh conversion. In the future, more
uses of it could be changed to use `CurveEval` and `Mesh` instead.
This is mostly not changed behavior, it is just a formalization of
existing logic after recent fixes for 2.8 versions last year and two
years ago. Also, in the future more functionality can be converted
to nodes, removing cases of implicit conversions. For more discussion
on that topic, see T89676.
The `use_fill_deform` option is removed. It has not worked properly
since 2.62, and the choice for filling a curve before or after
deformation will work much better and be clearer with a node system.
Applying the geometry nodes modifier to generate a curve is not
implemented with this commit, so applying the modifier won't work
at all. This is a separate technical challenge, and should be solved
in a separate step.
Differential Revision: https://developer.blender.org/D11597
Calms warning for unused variable in `constraint_copy_to_selected_poll`
by using UNUSED_VARS.
See D12453 for further details
Differential Revision: https://developer.blender.org/D12453
Reviewed by Campbell Barton
Since fields were committed to master, socket inspection did
not work correctly for all socket types anymore. Now the same
functionality as before is back. Furthermore, fields that depend
on some input will now show the inputs in the socket inspection.
I added support for evaluating constant fields more immediately.
This has the benefit that the same constant field is not evaluated
more than once. It also helps with making the field independent
of the multi-functions that it uses. We might still want to change
the ownership handling for the multi-functions of nodes a bit,
but that can be done separately.
Differential Revision: https://developer.blender.org/D12444
Now an instruction knows the cursors where it is inserted instead
of just the instruction that references it. This has two benefits:
* An instruction knows when it is the entry instruction.
* The cursor can contain more information, e.g. if it is linked to the
true or false branch of a branch instruction.
This also simplifies updating the procedure in future optimization
passes.
Mostly renaming the variables to improve line wrapping.
But also the "foreach_attribute" loops look simpler now.
Also use `Spline::copy_base_settings` and don't bother
with an extra call to reallocate the attribute arrays.
Just like the curve to points node, this mode outputs point locations
based on the input curve's evaluated points (the points you see in the
viewport). This is expected to be faster, since it doesn't have to
sample equal positions on the result, and it's also consistent with
the existing choices in the curve to points node.
Improvements to Quad View options' titles and descriptions.
See D12381 for more details.
Differential Revision: https://developer.blender.org/D12381
Reviewed by Hans Goudey and Campbell Barton
rBe2f99c338bd57 should have used the subversion currently defined
in Blender, instead it used one lower, so some files didn't have the
versioning applied.
Flag the changed object and its bones to update after moving a
constraint in the stack up or down. The two operators for move up and
move down seem to be unused, but I notices they had the same problem, so
I added the update there as well.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D12174
Refactor of our Vfont check for font validity.
See D12068 for further details.
Differential Revision: https://developer.blender.org/D12068
Reviewed by Campbell Barton
Recently we have decided to avoid fancier versioning for nodes with
string inputs for attribute names when updating the attribute workflow
for 3.0. In that case we would just duplicate any node that will
have an updated version to work with fields.
We want to be able to use the "proper" ID names for the new versions
of the nodes though, so this patch adds "Legacy" to the IDs of all
nodes that will be replaced in 3.0. This commit also removes the nodes
from the add menu when the fields experimental preference is enabled,
in order to make it clear what has been updated and what hasn't.
Nodes in the "Maybe" categories in versioning_300.c can be renamed
later if necessary. For now it's probably better to be conservative,
and to keep the list complete.
Differential Revision: https://developer.blender.org/D12420
Previously fluid simulation and Alembic modifiers had a dedicated function
to query the velocity for motion blur. Now use a more generic system where
those modifiers output a velocity attribute.
Advantages:
* Geometry and particle nodes can output velocity through the same mechanism,
or read the attribute coming from earlier modifiers.
* The velocity can be preserved through modifiers like subdivision surface or
auto smooth.
* USD and Alembic previously only output velocity from fluid simulation, now
they work with velocity from other sources too.
* Simplifies the code for renderers like Cycles and exporters like
Alembic and USD.
This breaks compatibility:
* External renderers and exporters accessing these velocities through the
Python API now need to use the attribute instead.
* Existing modifier node setups that create an attribute named "velocity"
will render differently with motion blur.
Differential Revision: https://developer.blender.org/D12305
