Mark `NlaStrip.frame_{start,end}` and `NlaStrip.frame_{start,end}_ui` as
to-be-ignored for the library override system, and add a new set of RNA
properties `frame_{start,end}_raw` that the library override system can
use.
Versioning code ensures that overrides on `frame_{start,end}` are
altered to be applied to the `..._raw` counterpart instead.
The override system uses RNA to update properties one-by-one, and the
RNA code trying its best to keep things consistent / valid. This is very
much desired behaviour while a human is editing the data.
However, when the library override system is doing this, it is not
replaying the individual steps (that each end in a valid configuration),
but just setting each property one by one. As a result, the intermediate
state can be invalid (for example moving one strip into another) even
when the end result is perfectly fine.
This is what the `..._raw` properties do -- they set the values without
doing any validation, so they allow the library overrides system to move
strips around.
This assumes that the result of the override is still valid. Logic to
detect invalid situations, and reshuffle the NLA strips if necessary, is
left for a future commit as it is related to #107990 (NLA Vertical
Reorder).
Additionally, this commit adds functions
`BKE_lib_override_library_property_rna_path_change()` and
`BKE_lib_override_library_property_search_and_delete()` to the library
override API. The former is used to change RNA paths of property
overrides, and the latter is used to remove a property override
identified by its RNA path.
When using edit mode with a mesh, if you have the retopology overlay active,
the selection of vertices, edges, or faces is occluded by the other objects.
However, if local view is on or collections with objects are hidden,
these non-visible objects can occlude the selection.
This patch discards objects that are not visible in the viewport so they
do not occlude selection.
During packing, some combinations of `Fraction` margin method, and
various locking options, interact with situations where all or none
of the islands are pinned.
Previously, the settings were queried to choose the best packing method.
Now, the islands themselves are queried if they can translate or scale,
and the packing method is chosen based on the input, rather than the
parameters.
Fixes unreported crash with "Locked Position" when all islands are pinned.
Reported as #108037 "3. In some case locked position is not respected"
When rotation is enabled and doing a scale line-search (locked islands
or "fraction" margin method), if the `rotate_inside_square` would
result in a a tighter packing, the wrong scale value was being used,
resulting in UVs outside of the unit square.
Reported as #108037 "1. Use locked scale on after scaling UV..."
If an island overlaps a pinned island, and that pinned island has
locked scale, then the pinning information must be copied to the
first island so it can be scaled correctly.
Reported in #108037 as "2. Use with Merge Overlapped"
Increase precision of some rotational inputs so that they all show the
same precision. And have the arrows change in full degrees.
Pull Request: #106515
For File Browser "System" and "Volumes" lists, the item names cannot be
changed by users yet the tooltip says "Double click to rename". This PR
just removes that text for these non-editable lists.
Pull Request: #106873
Resolves z-fighting blocking artifacts on faces due to limited
depth precision at certain camera positions. Depth bias
offsets the calculation enough without affecting display.
Authored by Apple: Michael Parkin-White
Pull Request: https://projects.blender.org/blender/blender/pulls/108048
Add a ensure_utf8 argument to WM_clipboard_text_get so callers don't
have to handle validation themselves.
Copying non-utf8 text into the Python console and buttons was possible,
causing invalid cursor position and a UnicodeDecodeError accessing
ConsoleLine.body from Python.
Originally this function expanded to the home however on WIN32
functionality changed to return the default Documents directory & the
function was renamed. Always expand "~" to the users home directory
since that's what it represents when used at the beginning of a path.
This renderpass pass outputs alpha blender surface
to allow combining them with the opaque passes.
Limitation: This only supports monochromatic opacity.
Colored opacity will show differently than in combined pass.
Pull Request: https://projects.blender.org/blender/blender/pulls/107890
Caused by 99e5024e97
Above commit changed behavior in that it only flagged the `uiBlock` with
`UI_BLOCK_POPUP_MEMORY` in case a Menu's title was provided to
`ui_popup_menu_create_block`. Now when is the title provided? This
depends on the `bl_label` set in the menu class. But this is not always
the case, there are some menus that have a blank `bl_label` (as seen
with `VIEW3D_MT_edit_mesh_context_menu` for example -- this specifies its
own label inside the draw function depending on vertex/edge/face mode).
Thus the provided title is not really reliable as source information to
do the flagging (also see for example
a38b98478a), flagging should **always** be
done [and only check a title for actually inserting in the puphash].
Choosing an entry in a menu will still handle puphash later (see
`button_activate_exit`) though multiple menus without a label might fight for the
same storage of the menu memory. Using idname instead (or in combination with
the label) for the hash could be looked at to solve this.
Pull Request: https://projects.blender.org/blender/blender/pulls/107427
This function handles cleaning valid system paths that are functional
when passed to `open(..)` but may be relative to the current working
directory or have redundant slashers that can be normalized.
- Add BLI_path_slash_ensure_ex which takes the string length.
- Normalize functions now return the string length,
so ensuring trailing a trailing slash is a simple check.
This would have avoided the off-by-one error from
761eac2f5d.
This feature implements smooth transition between 2 retimed segments.
A transition can be added by dragging retiming handle while holding
shift key. When any handle defining transition is removed, the
transition segment is removed and 2 linear segments are restored to
state before transition was created.
These transitions work with video and sound and changes are reflected
in waveforms with correct seeking, therefore it replaces usage of
`speed_factor` or earlier sound `pitch` property.
Smooth transition is achieved by evaluating Y value of circular arc,
that is tangent to lines of linear retimed segments. Because of this,
when transition length is changed both handles are moved symetrically.
This way it is possible to make transition without affecting content in
linear segments.
When linear segment after transition is further retimed, this shifts
content inside of a transition segment.
To support sound, `SEQ_retiming_sound_animation_data_set` and related
data structures has been updated to build speed table for each smooth
transition segment. Layering of retiming data via meta strips is still
fully supported.
Pull Request: https://projects.blender.org/blender/blender/pulls/107197
This commit adds a new experimental node "Sample Volume".
It's purpose is to be able to sample values from a volume grid given
a position field.
The 'Grid' input accepts a named attribute input with the name
of the volume grid to sample. Values will be implicitly converted
from the grid type to the specified value type.
Pull Request: #107656
Internal private struct was using `owner_id`/`self_id`, while the public
callback data struct was using `id_owner`/`id_self`.
Now using internal naming everywhere in lib_query related code, as
`owner_id` is already used in very low-level 'fundamental' part of the
code, e.g. in the `PointerRNA` struct, or in ID's 'loopback' pointers
for embedded data.
Note that this is only a very small first step toward proper naming
consistency for these type of data, the mismatch is currently spread all
over the code base.
We also need to document more formally the meaning and differences
between `self` and `owner` here.
Fixes preview images not showing up in asset-view templates or the in
development asset shelf.
The sliding-window optimization to only load previews that are in view
(or close to it) can't really be used by the asset-list API, since
figuring out what's actually in view is a bit tricky. So we have to
ensure all previews are loaded for now.
This pull request addresses bug https://projects.blender.org/blender/blender/issues/107633
Added logic to avoid creating duplicate Blender shader nodes when
converting USD Preview Surface shaders that are connected to more
than one input.
This change adds a `NodePlacementContext::node_cache` map to record
Blender nodes converted for given USD shaders. The node creation
logic has been updated to query this cache to check if a node was
previously created for a given USD shader, before creating a
new node.
Pull Request: https://projects.blender.org/blender/blender/pulls/107945
Using the topology map gives a constant time lookup, since it has a map
of nodes per type. The collada code used the old function, but had been
ifdef'd for four years, so it's removed here.
