I think this wasn't allowed before because the section of a curve was
built in multiple parts. But since rBe34d3e32dda7, the whole slice
of a curve is built in one piece, so we can easily support curve
caps for all geometry types, including the new custom profile option.
Note that this also allows "caps" when the fill type is not full.
They could easily be disabled by checking for "Full" fill type
if that was preferred in the future.
See the patch for images.
Differential Revision: https://developer.blender.org/D8911
This removes the limitation of the sculpt overlays not being visible
with modifiers active.
Reviewed By: fclem
Maniphest Tasks: T68900
Differential Revision: https://developer.blender.org/D8673
When entering scultp mode the visibility from the Face Sets is copied to
the base mesh. This steps was considering that if a vertex belongs to a
face with a visibible Face Set ID, it should be visible. As loose
geometry may not have any faces, those vertex were set to hidden.
Now this function check if a vertex visibility should be modified by the
face sets (by checking the loops), avoiding modifying the visibility of
loose geometry unintentionally.
Reviewed By: sergey
Maniphest Tasks: T80771
Differential Revision: https://developer.blender.org/D8899
Just converts verts to points and vice versa.
Materials and Attribute layers are preserved (so for example if you set
custom radii on the pointcloud, convert to mesh, then convert back to
pointcloud, this will be preserved).
Also not add a Radius layer by default (it is still added and
filled when adding a pointcloud object from the menu), a global Radius
property that will be used if there is no radius attribute can be added
later. A Radius attribute can also be added in the pointcloud data
properties (and filled via python).
This will also add a new utility function that copies materials between
datablocks: BKE_id_materials_copy
ref T75717
Differential Revision: https://developer.blender.org/D7391
Using context overrides in Python caused problems for any operator that
changed the context and require these changes to be read back.
CTX_wm_area_set() for e.g. would set the struct member but future
calls to CTX_wm_area() would still return the value defined by Python
callers context overrides.
This also resolves a mismatch between polling and calling operators
from Python, where poll would override the Python context where calling
only overrode the context when a new context was passed in.
This adds support for the same custom bevel profile widget used in
the bevel tool and modifier to the geometry generation for curves.
This is expecially useful for text and 2D curves with extrusion, as
it works much better than a weld & bevel modifier combination.
It can also be useful for adding quick detail to pipe-like objects.
The curve holds the CurveProfile struct and a new "Bevel Mode"
property decides which type of bevel to build, round, object, or
custom profile.
Although curves can already use another curve to make the bevel
geometry, this is a quicker way, and it also defines the profile of
just one corner of the bevel, so it isn't redundant. It's also nice
to have the same custom profile functionality wherever there is bevel.
Differential Revision: https://developer.blender.org/D8402
Adds an optional slider to the action constraint so that it can be
driven without a constraint target.
This is very helpful for more complex rigging and mechanical rigs, as it
means the action constraint can be controlled with a driver/custom
property directly, currently if we want to use a driver to control it we
must add a "dummy" bone/object inbetween to act as a control.
Reviewed By: Sebastian Parborg, Sybren A. Stüvel, Demeter Dzadik, Julian Eisel
Differential Revision: http://developer.blender.org/D8022
Currently, it's difficult to use the NLA system for users who are only
interested in using it as animation layers.
Entering tweak mode hides strips which are not evaluated. If the user
wanted to edit a different strip, they must exit tweak mode, look for
the strip, select it then re-enter tweak mode.
Solution:
All strips are always shown. The user can now see the next strip they
want to start editing.
Reviewed By: Sybren, Sebastian Parborg
Differential Revision: http://developer.blender.org/D7600
Previously, it was kind of a mess. In different places it was using `char`, `short` and `int`.
The changed properties are flags that are operated upon using bit operations. Therefore, the integer type should be unsigned. Since we only use 2 bits of these flags, `uint8_t` is large enough.
Especially note the change I had to make in `RNA_define.h` to make this work.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8844
CustomData_blend_write_prepare might modify the `CustomData`
instance, making it invalid afterwards. It is not necessary to do this
in other cases explicitly, because when writing shallow copies of
ID data blocks are made.
Adds two functions: one to copy a shaderfx between two gpencil objects,
and another to link all shaderfx between two gpencil objects. Added in
preparation for outliner shaderfx drag and drop.
Differential Revision: https://developer.blender.org/D8642
No functional changes. Split the grease pencil and object copy logic
into separate functions. This makes the code cleaner and prepares
utility functions for outliner modiifier drag and drop.
Differential Revision: https://developer.blender.org/D8642
This adds color tagging to collections. There are 8 color
options which are themable in the user preferences, with an additional
option for no color tag by default.
This adds a new filled collection icon and 8 colored variants of the
icon that can be themed in the user preferences.
In this commit the only interface to setting the color tags is through
Python, and there is nowhere in the interface where the collections are
shown colored. Setting and viewing the color tags from the outliner will
follow.
Manifest Task: https://developer.blender.org/T77777
Differential Revision: https://developer.blender.org/D8622
All the changes made in the branch `soc-2020-fluid-tools` are included in this patch.
**Major changes:**
=== Viewport Display ===
- //Raw voxel display// or //closest (nearest-neighbor)// interpolation for displaying the underlying voxel data of the simulation grids more clearly.
- An option to display //gridlines// when the slicing method is //single//.
==== Grid Display ====
- Visualization for flags, pressure and level-set representation grids with a fixed color coding based on Manta GUI.
==== Vector Display ====
- //**M**arker **A**nd **C**ell// grid visualization options for vector grids like velocity or external forces.
- Made vector display options available for external forces.
==== Coloring options for //gridlines// ====
- Range highlighting and cell filtering options for displaying the simulation grid data more precisely.
- Color gridlines with flags.
- Also, made slicing and interpolation options available for Volume Object.
Reviewed By: JacquesLucke, sebbas
Differential Revision: https://developer.blender.org/D8705
Relax limits of FCurve Bézier handles during evaluation. FCurve handles
can be scaled down to avoid the curve looping backward in time. This
scaling was done correctly but over-carefully, posing unnecessary
limitations on the possible slope of FCurves. This commit changes the
scaling approach such that the FCurve can become near-vertical.
Bump Blender's subversion from 291.0.1 to 291.0.2 to ensure that older
animation files are correctly updated.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D8752
Copy correct time to temporary strips used for evaluation of NLA
Transition strips.
When a transition is placed next to a meta strip, the transition would
use the wrong strip time, using the time of the meta strip instead of
its own.
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D8287
The instance offset should be applied before scaling.
This way the scaling is done from the "collection origin".
Reviewers: zeddb, brecht
Differential Revision: https://developer.blender.org/D8889
The bounding box is not updated in the original object when the function is called using evaluated object and keeps wrong while the object is not edited or the file saved.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D8565
Notes: Minor changes done in the patch following review comments.
Hiding a collection should hide all children objects even when we are in Local
view with one of them.
Note from reviewer: We are doing this already for local collections. So
may as well do it when hiding the collections for the entire view layer.
Developer details: In function "BKE_object_is_visible_in_viewport" object flag
BASE_VISIBLE_VIEWLAYER wasn't being checked when we were in Local view,
It's now changed so that it's checked even if we are in Local view.
And this function was called by some viewport draw functions to check if it
should draw an object or not.
Maniphest Tasks: T72584
Differential Revision: https://developer.blender.org/D7894
Set the inverse matrix when the Child Of constraint is created. This
prevents the bone/object from jumping away when the constraint is added,
improving usability.
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D8851
This project moves the current UV/Image editor drawing to the draw manager.
Why would we do this:
**Performance**:
Current implementation would draw each texel per time. Multiple texels could be
drawn per pixel what would overwrite the previous result. You can notice this
when working with large textures. Repeat image drawing made this visible by
drawing for a small period of time and stop drawing the rest. Now the rendering
is fast and all repeated images are drawn.
**Alpha drawing**:
Current implementation would draw directly in display space. Giving incorrect
results when displaying alpha transparent images.
This addresses {T52680}, {T74709}, {T79518}
The image editor now can show emission only colors. See {D8234} for
examples.
**Current Limitations**
Using images that are larger than supported by your GPU are resized (eg larger
than 16000x16000 are resized to 8k). This leaves some blurring artifacts. It is
a low priority to add support back of displaying individual pixels of huge
images. There is a design task {T80113} with more detail.
**Implementation overview**
Introduced an Image Engine in the draw module. this engine is responsible for
drawing the texture in the main area of the UV/Image editor. The overlay engine
has a edit_uv overlay which is responsible to draw the UV's, shadows and
overlays specifically for the UV Image editor. The background + checker pattern
is drawn by the overlay_background.
The patch will allow us to share overlays between the 3d viewport and UV/Image
editor more easily. In most cases we just need to switch the `pos` with the `u`
attribute in the vertex shader.
The project can be activated in the user preferences as experimental features.
In a later commit this will be reversed.
Reviewed By: Clément Foucault
Differential Revision: https://developer.blender.org/D8234
This should improve the issue with Scrape accumulation in concave
surfaces. When the strength of the brush is higher, the area radius is
also bigger, so the scrape plane is more stable preventing it from
accumulating displacement in the same area.
The Scrape/Fill default presets are also updated to include this
functionality.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D8821
There were some problems when converted several objects at the same time, especially with the material conversion. The problems were more visible when bake an animation with several objects at the same time.
* Now the layer name include the object name.
* Reorganize how the materials are generated including object name.
* Fix color not converted to sRGB.
* Avoid triangles when generate the stroke. This fix a draw manager issue and also add more geometry to use later.
* Code cleanup.
