When debugging with gdb in vscode, the stuff I print when executing a script in
the text editor does not show up in the terminal. It does work when I flush
explicitly though using `print(..., flush=True)`. This is quite annoying.
The solution is to always flush `stdout` and `stderr` automatically when running
a script. This is done using the CPython API, as just using
`fflush(stdout/stderr)` did not solve the issue.
Pull Request: https://projects.blender.org/blender/blender/pulls/136632
In Geometry Nodes a geometry is represented by a `GeometrySet`. This is a
container that can contain one geometry of each of the supported types (mesh,
curves, volume, grease pencil, pointcloud, instances). It's possible for a
`GeometrySet` to contain e.g. a mesh and a point cloud.
This patch creates a Python wrapper for the built-in `GeometrySet`. For now,
it's main purpose is to consume the complete evaluated geometry of an object
without having to go through complex hoops via `depsgraph.object_instances`. It
also also allows retrieving instances that have been created with legacy
instancing systems such as dupli-verts or particles.
In the future, the `GeometrySet` API could also be used for more kinds of
geometry processing from Python, similar to how we use `GeometrySet` internally
as generic geometry storage.
Since we can't really have constness guarantees in Python currently, it's
enforced that the `GeometrySet` wrapper always has its own copy of each geometry
type (so e.g. it does not share a `Mesh` data-block pointer with any other place
in Blender). Without the copy, changes to the mesh in the geometry set would
also affect the evaluated geometry that Blender sees. The copy has a small cost,
but typically the overhead should be low, because attributes and other run-time
data can still be shared. This should be entirely thread-safe, assuming that no
code modifies implicitly shared data, which is forbidden. For historic reasons
there are still cases like #132423 where this assumption does not hold in all
cases. Those cases should be fixed. To my knowledge, this patch does not
introduce any new such issues or makes existing issues worse.
Pull Request: https://projects.blender.org/blender/blender/pulls/135318
While using constructors in Operator classes is _really_ not
recommended, BPY code was a bit too eager to overwrite existing errors
with its own generic messages.
Now only generate these exceptions if there is no other exception
already set.
- Manually check over all direct calls to operator callbacks
ensuring the result isn't assigned to an int.
- OPERATOR_RETVAL_CHECK() now fails unless a wmOperatorStatus is used.
- Check the return values of direct calls to callbacks.
- Remove invalid check for the return value of rna_operator_check_cb.
- Use the variable name `retval` as it's most widely used.
- Move the assignment of `retval` out of the `if` statement in
sculpt/paint operators because it prevents assigning the result
`const` variable.
The main issue of 'type-less' standard C allocations is that there is no check on
allocated type possible.
This is a serious source of annoyance (and crashes) when making some
low-level structs non-trivial, as tracking down all usages of these
structs in higher-level other structs and their allocation is... really
painful.
MEM_[cm]allocN<T> templates on the other hand do check that the
given type is trivial, at build time (static assert), which makes such issue...
trivial to catch.
NOTE: New code should strive to use MEM_new (i.e. allocation and
construction) as much as possible, even for trivial PoD types.
Pull Request: https://projects.blender.org/blender/blender/pulls/135852
When adding the assert I thought this wasn't happening on Linux
(since I'm unable to redo it locally).
However the builtbot hits this assert on Linux, causing tests to fail.
Resolves#135195
This reverts commit
48abc7aabc &
62599317dd.
Revert !126755 as it was only meant to impact document generation
but it infact made functional changes, see: !135352.
The code-path for coercing a dictionary to operator/gizmo properties
was being used RNA functions where it's not supported.
Raise a type exception instead of crashing.
Add `PointerRNA::reset()` and `PointerRNA::invalidate()` utils functions
(both simply reset the PointerRNA data to empty state).
Replace `RNA_POINTER_INVALIDATE` macro by `PointerRNA::invalidate()`.
Follow-up to !134393 and e55d478c64.
Reading & restoring RNA "writable" state wasn't working reliably when
Python was called from multiple threads.
- Resolve by acquiring the GIL before calling `pyrna_write_*` functions.
- Assert `pyrna_write_*` has the GIL to prevent this happening again.
- Move duplicate checks from bpy_props.cc into utility functions.
When registering a class, warn if it's base-classes or sub-classes
are already registered as this is bad practice.
Currently the check only runs when the `--debug-python` argument is used
to avoid overhead on startup.
`bpy.utils.unregister_class(bpy.types.Menu)` would remove `bl_rna`
type information from the menu (also Panels & other built-int types).
Prevent unregistering built-in types since this will only cause problems.
Use `self` parameter to retrieve the actual 'owner' Main.
Previous code was using G_MAIN, which _should_ be fine in current usage
context, but would for sure break if these functions were to be used
from e.g. a temp Main.
Pull Request: https://projects.blender.org/blender/blender/pulls/134440
Cleaner and more future-proof. Also refactored slightly the code to make
it more readable.
And removed the 'experimental' warning in docs, this should have been
removed a long time ago.
Move `Library.runtime` to be a pointer, move the related
`LibraryRuntime` struct to `BKE_library.hh`. Similar to e.g.
Mesh.runtime, that pointer is expected to always be valid, and is
allocated at readtime or when creating a new Library ID.
Related smaller changes:
* Write code now uses standard ID writing codepath for Library IDs too.
* Runtime pointer is reset to nullptr before writing.
* Looking up a library by its absolute path is now handled through a
dedicated utils, `search_filepath_abs`, instead of using
`BLI_findstring`.
Pull Request: https://projects.blender.org/blender/blender/pulls/134188
Currently UI code always has to use char pointers when interacting with
the translation system. This makes benefiting from the use C++ strings
and StringRef more difficult. That means we're leaving some type safety
and performance on the table. This PR adds StringRef overloads to the
translation API functions and removes the few calls to `.c_str()` that
are now unnecessary.
Pull Request: https://projects.blender.org/blender/blender/pulls/133887
The general idea is to store an array of (type, data) pointers of all
PointerRNA ancestors of the current one.
This will help solving cases in our code where the owner (or sometimes
even the owner of the owner) of a random PointerRNA needs to be
accessed. Current solution mainly relies on linear search from the owner
ID, which is sub-optimal at best, and may not even be possible in case a
same data is shared between different owners.
This lead to refactoring quite a bit of existing PointerRNA creation code.
At a high level (i.e. expected usages outside of RNA internals):
* Add `RNA_pointer_create_with_parent` and
`RNA_pointer_create_id_subdata` to create RNA pointers with
ancestors info.
* `RNA_id_pointer_create` and `RNA_main_pointer_create` remain
unchanged, as they should never have ancestors currently.
* Add `RNA_pointer_create_from_ancestor` to re-create a RNA pointer
from the nth ancestor of another PointerRNA.
* Add basic python API to access this new ancestors data.
* Update internal RNA/bpy code to handle ancestors generation in most
common generic cases.
- The most verbose change here is for collection code, as the owner of the
collection property is now passed around, to allow collection items to get
a valid ancestors chain.
Internally:
* `PointerRNA` now has an array of `AncestorPointerRNA` data to store
the ancestors.
* `PointerRNA` now has constructors that take care of setting its data for
most usual cases, including handling of the ancestor array data.
* Pointer type refining has been fully factorized into a small utils,
`rna_pointer_refine`, that is now used from all code doing that operation.
* `rna_pointer_inherit_refine` has been replaced by
`rna_pointer_create_with_ancestors` as the core function taking care of
creating pointers with valid ancestors info.
- Its usage outside of `rna_access` has been essentially reduced to custom
collection lookup callbacks.
Implements #122431.
--------------
Some notes:
* The goal of this commit is _not_ to fully cover all cases creating
PointerRNA that should also store the ancestors' chain info. It only
tackles the most generic code paths (in bpyrna and RNA itself mainly).
The remaining 'missing cases' can be tackle later, as needs be.
* Performances seem to be only marginally affected currently.
* Currently `AncestorPointerRNA` only stores PointerRNA-like data.
This will help `StructPathFunc` callbacks to more efficiently generate
an RNA paths when calling e.g. `RNA_path_from_ID_to_property`, but will
not be enough info to build these paths without these callbacks. And some
cases may still remain fuzzy. We'd have to add thinks like a `PropertyRNA`
pointer, and for RNA collection ones, an index and string identifier, to store
a complete unambiguous 'RNA path' info. This is probably not needed, nor
worth the extra processing and memory footprint, for now.
Pull Request: https://projects.blender.org/blender/blender/pulls/122427
Some versions of PySide give errors when imported together with
bpy.app.translations, because the latter uses a tp_name that does not
exist. The only other tp_name we have with a dot in it (bgl.Buffer)
does exist.
Pull Request: https://projects.blender.org/blender/blender/pulls/134033
Caused by 59dc67974a
The behavior of `RNA_path_from_ID_to_property` /
`RNA_path_from_ID_to_property_index` is that it only gets the "prefix"
of the struct -- the one we are looking for, the one that is missing
here -- if we feed it the `newptr` since it calls
`RNA_path_from_ID_to_struct(ptr)` to get that prefix.
If we feed it the **ID** pointer it will be empty (makes sense it would
basically be "path from ID to ID"...we need it to be "path from ID to
constraint").
Pull Request: https://projects.blender.org/blender/blender/pulls/133977
