Caused by {rB919558854d62}.
Same fix as in {rBdc8a43c8755a} -- let RNA enum item callbacks check
for NULL context.
The NULL context is used to extract items for document generation.
Maniphest Tasks: T88251
Differential Revision: https://developer.blender.org/D11391
Tool settings for sequencer were not initialized, which caused crash
when adding strips.
There was fix for same issue in versioning rB0f81dafe6cec, but
subversion was not bumped, so files with uninitialized tool settings
may still exist.
Add `SEQ_tool_settings_get()` accessor function that will initialize
tool settings if they are missing. Change operator code to use
`SEQ_tool_settings_fit_method_get()` function instead of accessing
tool settings directly
Reviewed By: campbellbarton
Differential Revision: https://developer.blender.org/D11383
This fallback is an old hack.
It is difficult to have an orientation convention when several random
factors determine which one should be used.
In this case, to "fix" the problem, a new behavior had to be implemented.
Now the redo when moving the camera in `Camera View` has the default
orientation as `View`.
The CoW copy of the node group was not updated correctly after it
changed. Arguably, tagging the node tree could also be part of
`ntreeUpdateTree` (which needs to be called after changes to the
node tree anyway). However, there are many instances where the
depsgraph is tagged explicitly after `ntreeUpdateTree` is called,
so it should be fine here as well. This is similar to what is done
in `snode_dag_update`.
Differential Revision: https://developer.blender.org/D11342
Previously, the "follow path constraint" and "follow parented curve"
were clamped. This restriction was lifted in rBcf2baa585cc8
Add back an option to get the old behavior in the "Path animation" settings.
Reviewed By: Sybren
Differential Revision: http://developer.blender.org/D11263
Since there is a special callback for assigning the name from the
search box, and the callback doesn't call an operator or something
else that would do an undo push, I think the solution is to do it
manually here.
Another option would be adding the button flag "UI_BUT_UNDO", which
isn't set by default for search buttons, but that gives us ugly names for
the undo steps, so an explicit push is better in this case.
Differential Revision: https://developer.blender.org/D11190
When activated in modal, `translate`, `resize`, `rotate`, `shear` and
`edge_rotate_normal` use a different orientation than the set in scene.
This orientation needed to match since some of these modes can be switched
during operation.
The default orientation for these modes was `V3D_ORIENT_VIEW`.
And this changed when finishing the `translate` and `resize` to
`V3D_ORIENT_GLOBAL`.
But this could cause inconsistencies when inputting values from the
keyboard.
The solution now is to change the orientation when you change the mode.
---
Note: Although the user can expect the value entered to reflect the
orientation set in the scene, it would require a lot of changes and would
not be really useful.
Fix T88167.
Caused by {rB97defd9cd79b6e3ed0e52481a7078107dbe0522b}
`(BLI_rcti_isect_pt` used here to confirm if cursor position is in between active region boundary.
Subtracting min region boundary from the mouse position before the check, fails the condition.
`mval[2]` introduced to hold the region relative mouse position.
Reviewed By: Severin
Maniphest Tasks: T88167
Differential Revision: https://developer.blender.org/D11224
Changes output for geometry info node in Eevee to be consistent with Cycles (w/o osl)
Before this patch Eevee outputs Z-tangent even for hair. This patch changes it to output hair tangent (growth direction). Hair tangent is impossible to derive otherwise from normal or view direction.
Reviewed By: fclem, brecht
Differential Revision: https://developer.blender.org/D10841
This is caused by lacking of consideration of
OB_DUPLICOLLECTION in updateDepsgraph() in the
modifier.
Reviewed by: Antonio Vazquez (antoniov)
https://developer.blender.org/D11292
Value of the size argument in `strncat` is too large, might lead to a
buffer overflow.
Change the argument to be the free space in the destination buffer
minus the terminating null byte.
Introduced in 5368859a66
Reviewed By: Sergey
Differential Revision: https://developer.blender.org/D11289
Resolve ownership ambiguity with shared physics pointers.
Previously, LIB_ID_CREATE_NO_MAIN allowed pointer sharing with
the source ID so physics caches can be shared between original and
evaluated data: (Object.soft.shared & Object.rigidbody_object.shared).
This only worked properly for LIB_TAG_COPIED_ON_WRITE ID's,
as LIB_TAG_NO_MAIN can be used in situations where the original ID's
lifetime limited by it's original data.
This commit adds `LIB_ID_COPY_SET_COPIED_ON_WRITE` so ID's only share
memory with original data for ID's evaluated in the depsgraph.
For all other uses, a full copy of physics data is made.
Ref D11228#287094
Expand is not expected to update the visibility state of the PBVH, only
the Face Sets IDs. If visibility updates are made accidentally, PBVH
rendering breaks.
In order for this to work properly, the following fixes are needed:
- Expand should always check for active component before attempting to
modify a Face Set ID
- Expand should always check the visibility state on original_face_sets, as
it is the array that contains the visiblilty state that corresponds with the
current state used for PBVH rendering. This implies that after any modification
done by Expand, the visibility state of ss->face_sets and
expand_cache->original_face_sets should match (like in any other tool that
does not modify visibility).
- Expand should never modify the Face Set ID of a poly that is hidden in
expand_cache->original_face_sets.
- When deleting an ID, hidden Face Sets should be skipped when picking IDs for
content filling. This avoids introducing hidden IDs back into the visible
geometry even after updating its visibility state.
Reviewed By: JulienKaspar, JacquesLucke
Maniphest Tasks: T88230
Differential Revision: https://developer.blender.org/D11243
Before, the camera parameters were calculated only for first frame.
If the camera is animated, these values need to be recalculated in order to get the new camera view position and export the strokes as expected.
Also fixed the export of PDF when the view is not in camera view. PDF export, needs to be done in camera view.
This was a bug uncovered by rB50782df42586.
Previously, the lightcache was always discarded between redraw and forced
to be updated again.
Now we check for update inside the render loop making it compatible with
accumulation motion blur and long exposure.
This was caused by the slight focus gather not being wide enough
for small radii. Now the cast to int will properly round the radius to
the nearest integer.
This is related to T86244 Black Artefacts in EEVEE on Transparent BSDF
This was caused by the bokeh LUT being sampled outside the valid range.
But `texelFetch` is only valid if the sample actually exists. This lead to
undefined behavior.
The fix is to increase `DOF_MAX_SLIGHT_FOCUS_RADIUS` (which just offsets the
LUT along the X=Y axis) to avoid any sample outside the defined range.
operator
This is only used when the preset is set to 'Custom', make that clear in
the tooltip and disable editing the value if another preset is used.
Issue came up in T88155.
Maniphest Tasks: T88155
Differential Revision: https://developer.blender.org/D11210
effect
The way it is now, `ClothVertex->mass` is setup once for the clothObject
and then reused if it already exists [so does not change across frames/
steps] which happens in`cloth_from_object` / `do_init_cloth`, where
`SIM_cloth_solver_init` / `SIM_mass_spring_set_vertex_mass` are called
and set up masses in `Implicit_Data`.
Seems possible to update `ClothVertex->mass` every step in
`do_step_cloth`, however it seems more involved to update the masses in
`Implicit_Data` there as well. The masses from `Implicit_Data` are
accessed in many places, so it would be mandatory to have these masses
kept up-to-date (and even then it is unclear if the solver was designed
to work with these animated or if there are assumptions about this being
stable across the sim).
So propose to remove the (broken/not implemented) animation capabilities
on the property instead.
Maniphest Tasks: T88188
Differential Revision: https://developer.blender.org/D11225
In {rB266cd7bb82ce}, support for muting links was added. It might be
debatable if we define a shader as "having" displacement even if the link
is muted, but after said commit, shader_has_displacement() would return
true but still leave the returned node as NULL.
Now also return false if the link is muted (otherwise the caller would
need to additionally check the returned node as well.)
Maniphest Tasks: T88234
Differential Revision: https://developer.blender.org/D11256
Code would still create an object (without setting up materials), code
for removing unused material slots would then freeze.
Now return/cancel early in case of empty selection.
This came up in T88269 [which is still not fully fixed, transforming
curve edit points clear their GP_STROKE_SELECT flag which now results in
the early exit, should be looked at separately]
Maniphest Tasks: T88269
Differential Revision: https://developer.blender.org/D11252
This allows extra options (in-front and stroke order) to be shown when adding line art kind of grease pencil object.
Reviewed by: Antonio Vazquez (antoniov)
Diff: https://developer.blender.org/D11130
link->multi_input_socket_index, which is used to calculate the links
position on the multi-input socket, was not set.
Now it is set to the sockets current link count.
Review: Jacques Lucke (JacquesLucke)
Differential Revision: https://developer.blender.org/D11082
When disk cache path is same as blend file path, with Unix-like systems
blend file can be overwritten by disk cache directory.
This was caused by `BLI_delete(path, false, true)` when path points to
file. On Windows this would result in error message and file would not
be deleted. On Linux, file is deleted and then overwritten with cache
directory.
To further minimize chance of removing blend file, append disk cache
path with `_seq_cache` suffix.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11217
Byte images used `ibuf->float_colorspace` as source colorspace.
This was oversight - `ibuf->rect_colorspace` should be used as source
colorspace.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11223
In e1f3996d74, logic for changing metastrip start and end frame based
on contained strips was removed. This was done intentionally and
incorrect functionality wasn't noticed as drawing code reflected
seemingly correct state.
Original code was mostly correct, because meta strip doesn't store its
internal start and end points. This code was restored with minor
modifications so function `SEQ_time_update_sequence()` is fully self
contained as it is used not only by transform operator.
In addition, drawing glitches that happen when meta content is outside
of meta boundaries were fixed. These glitches were not caused by
e1f3996d74.
Reviewed By: sergey
Differential Revision: https://developer.blender.org/D11215
This was caused by the drivers not optimizing the shader enough to remove
the samplers and data used by closure eval. Removing the lighting loops
from the depth shader fixes the perf regression.
With Constrain to Image Bounds selected, UVs will be constrained to the
correct/closest UDIM if the image is tiled.
UVs will be constrained to the 0-1 UV space if the image is not tiled.
This will override the present behavior of always constraining selected
UVs to the 0-1 UV space (UDIM 1001).
Reviewed By: campbellbarton
Ref D11202
The id-property iterator referenced a PyObject pointer without
increasing it's user count - allowing for errors if the value
goes out of scope during iteration.
This enables the overlay for instanced geometry.
After this change, objects that are an instance of the current active
object (which are also being modified in the current active mode) won't
fade, which is different from the previous behavior.
Reviewed By: fclem
Maniphest Tasks: T82155
Differential Revision: https://developer.blender.org/D9362
When checking if the mesh has only one Face Set only the current active
component for expand needs to be checked. Otherwhise other components
that won't be modified by Expand that contain other IDs will be taken
into account, making the Face Set deletion go into an infinite loop.
Reviewed By: JacquesLucke
Maniphest Tasks: T88060
Differential Revision: https://developer.blender.org/D11169
