Do not escape flow / effector objects if they have a disabled use flow / use effector flag.
Vertex velocities still need to be kept track of in order to have correct object velocities when enabling flows / effectors intermittenly. It is possible though to skip the emission loop if the flags are disabled.
This code is not used by the new fluid simulation system.
Therefore, it does not make sense to keep it around.
We do want to integrate the fluid system with the generic cache
system eventually, but refactoring the system is easier when there
is less dead code that has to be refactored.
Note, I could not remove BKE_ptcache_id_from_smoke entirely yet,
because the depsgraph seems to expect that object that
uses DEG_add_collision_relations also has a pointcache.
That is because it wants to reset the point cache when any of the
other objects changed (this does not work with fluids currently).
Reviewers: sebbas
Differential Revision: https://developer.blender.org/D8987
In the end the process is surpringly simple, we only need to manually
convert the proxy itself into an override (which is trivial), and then
run common code with the default 'make override' operation.
Fix T81059: Add operator to convert proxies to library overrides.
Some RNA setters require ID data they operate on to be in G_MAIN.
Unfortunately, when we apply overrides as part of a .blend file reading,
new Main is not yet made global one, so we have to do it temporarily
here.
This is a fairly ugly hack, but it should be harmless and safe.
This is a first step towards supporting conversion of proxies, done
separately to make it easy to pinpoint in case it would create problems.
It is not expected to cause any change in behavior currently.
Constructive modifiers were not initializing an original index layer
in the case a previous deform modifier created 'mesh_final'.
This happened in the case of multiple deform modifiers that deform along
normals, as requesting normals caused the final mesh to be created.
Ensure mapping data is created in the case
only non-constructive modifiers have run.
This refactor is in response to an unreported bug in which overlapping, moving colliders produced an unstable simulation.
Things that change apart from cleanup through this refactor:
- Effector objects with no velocities (either non-animated or animated but non-moving object) will explicitly set zero velocities in their flow bounding box.
- When applying object velocities to the global grid, they will now be accumulated per cell (add and not set velocities). Later they will be averaged with the object count at any cell.
With the new image editor drawing there were was some mutual exclusive
functionality. When rendering the alpha was shown correctly or the pure
emissive colors were shown correctly, but never both. The cause of this
is that the image_gpu did not used the correct alpha mode when generating
gpu textures for non-images (render results, compositors viewer)
The implementation always checked the alpha_mode. Alpha mode is an
attribute for images, but aren't set for non images. This patch adds
a more detailed check to ensure that the gpu texture is premultiplied.
The issue has been tested using several bug report files and production
files.
Reviewed By: Brecht van Lommel
Differential Revision: https://developer.blender.org/D8978
This patch adds a new operator to convert a black and white image into
grease pencil strokes.
If the image is not B/W, an internal conversion is done.
This is the first operator using Potrace, but we expect to add more features in next Blender versions.
Reviewed By: HooglyBoogly
Maniphest Tasks: T79877
Differential Revision: https://developer.blender.org/D8951
Allows scripters to store additional information in the marker itself instead
of using work-around approach based on marker names and such.
Differential Revision: https://developer.blender.org/D8944
Originally was noticed when transforming mesh created by
object.to_mesh() from an object without modifier, in which case the
result references CustomData layers used by the object itself.
The issue goes a bit deeper: mesh.transform() should never modify
referenced layers, hence it should duplicate referenced layers.
This fix changes one specific aspect of the reported behavior. The
case where vertices coordinates are modified manually will still have
affect on the source mesh (as no referenced CustomData layers are being
duplicated). Proper fix for this case is not yet clear to me.
Differential Revision: https://developer.blender.org/D8939
The issue was that the pointcache was not storing dead particles,
even though they are displayed. This lead to the rendering issue,
because only alive particles can be read from the point cache in
the frame that is rendered.
This also fixes an issue unrelated to rendering: when dead particles
are displayed, their position is incorrect when some frames are
skipped during playback.
Reviewers: brecht
Differential Revision: https://developer.blender.org/D8907
This patch tries to sanitize the types of our size parameters across our read
and write code, which is currently fairly inconsistent (using `int`, `uint`,
`size_t`...), by using `size_t` everywhere. Since in Blender file themselves
we can only store chunk of size `MAX_INT`, added some asserts to ensure that
as well.
See {T79561} for details.
Differential Revision: https://developer.blender.org/D8672
I think this wasn't allowed before because the section of a curve was
built in multiple parts. But since rBe34d3e32dda7, the whole slice
of a curve is built in one piece, so we can easily support curve
caps for all geometry types, including the new custom profile option.
Note that this also allows "caps" when the fill type is not full.
They could easily be disabled by checking for "Full" fill type
if that was preferred in the future.
See the patch for images.
Differential Revision: https://developer.blender.org/D8911
This removes the limitation of the sculpt overlays not being visible
with modifiers active.
Reviewed By: fclem
Maniphest Tasks: T68900
Differential Revision: https://developer.blender.org/D8673
When entering scultp mode the visibility from the Face Sets is copied to
the base mesh. This steps was considering that if a vertex belongs to a
face with a visibible Face Set ID, it should be visible. As loose
geometry may not have any faces, those vertex were set to hidden.
Now this function check if a vertex visibility should be modified by the
face sets (by checking the loops), avoiding modifying the visibility of
loose geometry unintentionally.
Reviewed By: sergey
Maniphest Tasks: T80771
Differential Revision: https://developer.blender.org/D8899
Just converts verts to points and vice versa.
Materials and Attribute layers are preserved (so for example if you set
custom radii on the pointcloud, convert to mesh, then convert back to
pointcloud, this will be preserved).
Also not add a Radius layer by default (it is still added and
filled when adding a pointcloud object from the menu), a global Radius
property that will be used if there is no radius attribute can be added
later. A Radius attribute can also be added in the pointcloud data
properties (and filled via python).
This will also add a new utility function that copies materials between
datablocks: BKE_id_materials_copy
ref T75717
Differential Revision: https://developer.blender.org/D7391
Using context overrides in Python caused problems for any operator that
changed the context and require these changes to be read back.
CTX_wm_area_set() for e.g. would set the struct member but future
calls to CTX_wm_area() would still return the value defined by Python
callers context overrides.
This also resolves a mismatch between polling and calling operators
from Python, where poll would override the Python context where calling
only overrode the context when a new context was passed in.
This adds support for the same custom bevel profile widget used in
the bevel tool and modifier to the geometry generation for curves.
This is expecially useful for text and 2D curves with extrusion, as
it works much better than a weld & bevel modifier combination.
It can also be useful for adding quick detail to pipe-like objects.
The curve holds the CurveProfile struct and a new "Bevel Mode"
property decides which type of bevel to build, round, object, or
custom profile.
Although curves can already use another curve to make the bevel
geometry, this is a quicker way, and it also defines the profile of
just one corner of the bevel, so it isn't redundant. It's also nice
to have the same custom profile functionality wherever there is bevel.
Differential Revision: https://developer.blender.org/D8402
Adds an optional slider to the action constraint so that it can be
driven without a constraint target.
This is very helpful for more complex rigging and mechanical rigs, as it
means the action constraint can be controlled with a driver/custom
property directly, currently if we want to use a driver to control it we
must add a "dummy" bone/object inbetween to act as a control.
Reviewed By: Sebastian Parborg, Sybren A. Stüvel, Demeter Dzadik, Julian Eisel
Differential Revision: http://developer.blender.org/D8022
Currently, it's difficult to use the NLA system for users who are only
interested in using it as animation layers.
Entering tweak mode hides strips which are not evaluated. If the user
wanted to edit a different strip, they must exit tweak mode, look for
the strip, select it then re-enter tweak mode.
Solution:
All strips are always shown. The user can now see the next strip they
want to start editing.
Reviewed By: Sybren, Sebastian Parborg
Differential Revision: http://developer.blender.org/D7600
Previously, it was kind of a mess. In different places it was using `char`, `short` and `int`.
The changed properties are flags that are operated upon using bit operations. Therefore, the integer type should be unsigned. Since we only use 2 bits of these flags, `uint8_t` is large enough.
Especially note the change I had to make in `RNA_define.h` to make this work.
Reviewers: campbellbarton
Differential Revision: https://developer.blender.org/D8844
CustomData_blend_write_prepare might modify the `CustomData`
instance, making it invalid afterwards. It is not necessary to do this
in other cases explicitly, because when writing shallow copies of
ID data blocks are made.
Adds two functions: one to copy a shaderfx between two gpencil objects,
and another to link all shaderfx between two gpencil objects. Added in
preparation for outliner shaderfx drag and drop.
Differential Revision: https://developer.blender.org/D8642
No functional changes. Split the grease pencil and object copy logic
into separate functions. This makes the code cleaner and prepares
utility functions for outliner modiifier drag and drop.
Differential Revision: https://developer.blender.org/D8642
This adds color tagging to collections. There are 8 color
options which are themable in the user preferences, with an additional
option for no color tag by default.
This adds a new filled collection icon and 8 colored variants of the
icon that can be themed in the user preferences.
In this commit the only interface to setting the color tags is through
Python, and there is nowhere in the interface where the collections are
shown colored. Setting and viewing the color tags from the outliner will
follow.
Manifest Task: https://developer.blender.org/T77777
Differential Revision: https://developer.blender.org/D8622
All the changes made in the branch `soc-2020-fluid-tools` are included in this patch.
**Major changes:**
=== Viewport Display ===
- //Raw voxel display// or //closest (nearest-neighbor)// interpolation for displaying the underlying voxel data of the simulation grids more clearly.
- An option to display //gridlines// when the slicing method is //single//.
==== Grid Display ====
- Visualization for flags, pressure and level-set representation grids with a fixed color coding based on Manta GUI.
==== Vector Display ====
- //**M**arker **A**nd **C**ell// grid visualization options for vector grids like velocity or external forces.
- Made vector display options available for external forces.
==== Coloring options for //gridlines// ====
- Range highlighting and cell filtering options for displaying the simulation grid data more precisely.
- Color gridlines with flags.
- Also, made slicing and interpolation options available for Volume Object.
Reviewed By: JacquesLucke, sebbas
Differential Revision: https://developer.blender.org/D8705
Relax limits of FCurve Bézier handles during evaluation. FCurve handles
can be scaled down to avoid the curve looping backward in time. This
scaling was done correctly but over-carefully, posing unnecessary
limitations on the possible slope of FCurves. This commit changes the
scaling approach such that the FCurve can become near-vertical.
Bump Blender's subversion from 291.0.1 to 291.0.2 to ensure that older
animation files are correctly updated.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D8752
Copy correct time to temporary strips used for evaluation of NLA
Transition strips.
When a transition is placed next to a meta strip, the transition would
use the wrong strip time, using the time of the meta strip instead of
its own.
Reviewed by: sybren
Differential Revision: https://developer.blender.org/D8287
