The mask is expected to be always be displayed smooth, and the
option mainly existed for some legacy drivers. IF smooth drawing
causes issues it should be fixed in the drawing code, not as an
option in the interface.
Differential Revision: https://developer.blender.org/D15266
Show a custom properties panel in the collections tab,
matching other data-blocks which already support this.
Reviewed by: HooglyBoogly, campbellbarton
Ref D12598
Adds a custom property panel for the active `Action` to the Dopesheet
editor. There was previously no way to edit these properties outside of
the Python API.
This panel will show up when
`context.active_object.animation_data.action` is set.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D14646
Adds an overlay option to show/hide the spline points & lines of masks in the Mask Editor.
It also moves the "smooth" option up (its position left of the selection dropdown was missleading).
{F11847272}
This emerged from a discussion in https://developer.blender.org/D12776
Differential Revision: https://developer.blender.org/D13314
This adds a new parameter to the "Combined" overlay mode of the mask editor.
The "blending factor" allows users to blend the mask exterior with the original
footage to visualise the content of the mask in a more intuitive way. The
"Alpha" overlay is unaffected by this change.
The existing "Combined" overlay is used like before (covering everything
outside the mask in black), but can be blended with the slider in the mask
overlay to look at the exterior.
This is part of an effort to make mask editing more intuitive & easy to use:
https://developer.blender.org/T93097
Differential Revision: https://developer.blender.org/D13284
Part of T98560.
See https://wiki.blender.org/wiki/Source/Interface/Views
Adds all the basic functionality needed for grid views. They display
items in a grid of rows and columns, typically with a preview image and
a label underneath. Think of the main region in the Asset Browser.
Current features:
- Active item
- Notifier listening (also added this to the tree view)
- Performance: Skip adding buttons that are not scrolled into view
(solves performance problems for big asset libraries, for example).
- Custom item size
- Preview items (items that draw a preview with a label underneath)
- Margins between items scale so the entire region width is filled with
column, rather than leaving a big empty block at the right if there's
not enough space for another column (like the File and current Asset
Browser does it).
- "Data-View Item" theme colors. Not shown in the UI yet.
No user visible changes expected since the grid views aren't used for
anything yet.
This was developed as part of a rewrite of the Asset Browser UI
(`asset-browser-grid-view` branch), see T95653. There's no reason to
keep this part in a branch, continuing development in master makes
things easier.
Grid and tree views have a lot of very similar code, so I'm planning to
unify them to a degree. I kept things separate for the start to first
find out how much and what exactly makes sense to override.
There were two problems here:
1) Console warnings due to brush was None.
2) It was impossible to recreate a brush.
This patch fixes both issues and it is now possible to recreate any brush.
Differential Revision: https://developer.blender.org/D15213
Reviewed by: @dflelinto
Fixes T97706
Adds operator to duplicate the active color attribute layer.
Adds `"Color Attribute Specials"` menu to color attribute ui to access the `"geometry.color_attribute_duplicate"` operator.
Internally adds a function that duplicates a referenced CustomDataLayer
- `BKE_id_attribute_duplicate` mostly copies the existing `BKE_id_attribute_new`
- but gets the type and domain from the referenced layer
- and copies the data from the old layer into the new layer
Reviewed By: Joseph Eagar & Hans Goudey & Julien Kaspar
Differential Revision: https://developer.blender.org/D14823
Ref D14823
The following CMake options have been added (enabled by default),
except for the lite build configuration.
- WITH_IO_STL
- WITH_IO_WAVEFRONT_OBJ
- WITH_IO_GPENCIL (for grease pencil SVG importing).
Note that it was already possible to disable grease pencil export
by disabling WITH_PUGIXML & WITH_HARU.
This is intended to keep the lite builds fast and small for building,
linking & execution.
Reviewed By: iyadahmed2001, aras_p, antoniov, mont29
Ref D15141
Add three operators to the Collections properties panel:
- `object.instance_offset_to_cursor`, which is already available from
the Object properties panel. The operator works on the active
collection, though, so it's weird to not have it in the Collections
panel.
- `object.instance_offset_from_object` is a new operator, which performs
the same operation as above, but then based on the active object's
evaluated world position.
- `object.instance_offset_to_cursor` is also new, and performs the
opposite of the first operator: it moves the 3D cursor to the
collection's instance offset.
The first two operators make it easier to set the instance offset. The
last operator makes it possible to actually see the offset in the 3D
viewport; drawing it using some overlay could also work, but that would
be more effort to get right, and then snapping the 3D cursor would still
be useful.
The operators are placed in a popup menu, as to not clutter the
interface too much with various buttons.
Reviewed By: dfelinto, eyecandy
Differential Revision: https://developer.blender.org/D14966
A new experimentatl STL importer, written in C++. Roughly 7-9x faster than the
Python based one.
Reviewed By: Aras Pranckevicius, Hans Goudey.
Differential Revision: https://developer.blender.org/D14941
This implements transform modes for the transform tool and Elastic
Transform. This mode uses the Kelvinlets from elastic deform to apply
the transformation to the mesh, using the cursor radius to control the
elasticity falloff.
{F9269771}
In order for this to work, the transform tool uses incremental mode when
elastic transform is enabled. This allows to integrate the displacement of
the Kelvinet in multiple steps.
Review By: Sergey Sharbin & Daniel Bystedt & Julian Kaspar & Campbell
Barton
Differential Revision: https://developer.blender.org/D9653
Ref D15041
In the latest discussions about curves/hair mesh attachement
information (T95776), it was decided to use UV coordinates to
store where on the mesh each root is. For that, we have to specify
which of the UV map attributes to use for UV lookups.
This property isn't used yet, but it will be shortly when refactoring
the attachement information in the add brush and the to particle
system conversion.
Differential Revision: https://developer.blender.org/D15115
It can be assumed that all scripts comply with basic pep8 formatting
regarding white-space, indentation etc.
Also remove note in best practices page & update `tests/python/pep8.py`.
If we want to exclude some scripts from make format,
this can be done by adding them to `ignore_files` in:
source/tools/utils_maintenance/autopep8_format_paths.py
Or using `# nopep8` for to ignore for individual lines.
Ref T98554
To make it consistent with collections, now it's possible to name the new layer created using the `Move to Layer` option.
Differential Revision: https://developer.blender.org/D15092
This commit adds a float selection to curve control points or curves,
a sculpt tool to paint the selection, and uses the selection influence
in the existing sculpt brushes.
The selection is the inverse of the "mask" from mesh sculpt mode
currently. That change is described in more detail here: T97903
Since some sculpt tools are really "per curve" tools, they use the
average point selection of all of their points. The delete brush
considers a curve selected if any of its points have a non-zero
selection.
There is a new option to choose the selection domain, which affects how
painting the selection works. You can also turn the selection off by
clicking on the active domain.
Sculpt brushes can be faster when the selection is small, because
finding selected curves or points is generally faster than the
existing brush intersection and distance checks.
The main limitation currently is that we can't see the selection in the
viewport by default. For now, to see the selection one has to add a
simple material to the curves object as shown in the differential
revision. And one has to switch to Material Preview in the 3d view.
Differential Revision: https://developer.blender.org/D14934
This commit hides "UI attributes" described in T97452 from the UI lists
in mesh, curve, and point cloud properties, and disallow accessing them
in geometry nodes.
Internal UI attributes like selection and hiding values should use the
attribute system for simplicity and performance, but we don't want to
expose those attributes in the attribute panel, which is meant for
regular user interaction. Procedural access may be misleading or cause
problems, as described in the design task above.
These attributes are added by two upcoming patches: D14934, D14685
Differential Revision: https://developer.blender.org/D15069
If the asset is stored in the current file, display the corresponding
icon in the "Source" button in the sidebar. This is a nice indicator and
helps users learn what this icon represents (it's used in the main
region without text too).
This patch makes it possible to change the precision with which to
store volume data in the NanoVDB data structure (as float, half, or
using variable bit quantization) via the previously unused precision
field in the volume data block.
It makes it possible to further reduce memory usage during
rendering, at a slight cost to the visual detail of a volume.
Differential Revision: https://developer.blender.org/D10023
Avoids having to manually enable data-blocks for user-edition when you
do not care about what should be edited by whom. Similar to default
behavior before introduction of system overrides (aka non-user-editable
overrides).
Display information about sound media in "Source" category in side panel
similar to movie resolution and framerate.
The specs are stored in the `Sequence` struct, and are extracted at
the moment of struct creation. If the "source file" is changed,
the specs change also.
Reviewed By: ISS
Differential Revision: https://developer.blender.org/D14565
Actually, delete the strip only deletes the container, but not the linked data. This patch adds the option to delete the scene also. This is very handy for storyboarding.
Reviewed By: ISS
Maniphest Tasks: T97683
Differential Revision: https://developer.blender.org/D14794
This operator allows to add a new scene at the same time that the strip. This is very handy for storyboarding.
Reviewed By: ISS
Maniphest Tasks: T97678
Differential Revision: https://developer.blender.org/D14790
This creates a new curves object with the name of the particle system.
The generated curves match the current evaluated state of the active hair
particle system.
Attachment information is not transferred currently.
Differential Revision: https://developer.blender.org/D14908
This patch adjusts the UI layouts for the tool header and the tool
properties in sculpt mode in a few ways. The goals are to better group
related settings, keep fundamental settings easily accessible, fix the
availability of some options, and make better use of space.
1. Remove ID template in tool header
2. Rename "Add Amount" to "Count" for add brush
3. Add "use pressure" toggles to radius and strength sliders
4. Move strength falloff to a popover
5. Move many "Add" brush settings to popover called "Curve Shape"
6. Move two "Grow/Shrink" options to a popover called "Scaling"
7. Don't display "Falloff" panel in properties when it has no effect
See the differential revision for screenshots and more reasoning.
Differential Revision: https://developer.blender.org/D14922
Add a property to the **Shade Smooth** operator to quickly enable the Mesh `use_auto_smooth` option.
The `Angle` property is exposed in the **Adjust Last Operation** panel to make it easy to tweak on multiple objects without having to go to the Properties editor.
The operator is exposed in the `Object` menu and `Object Context Menu`.
=== Demo ===
{F13066173, size=full}
Regarding the implementation, there are multiple ways to go about this (like making a whole new operator altogether), but I think a property is the cleanest/simplest.
I imagine there are simpler ways to achieve this without duplicating the `use_auto_smooth` property in the operator itself (getting it from the Mesh props?), but I couldn't find other operators doing something similar.
Reviewed By: #modeling, mont29
Differential Revision: https://developer.blender.org/D14894
