This panel is only visible when debug_value is set to 256 and has no
affect in other cases. However, if debug value is not set to this
value, environment variables will be used to control which features
are enabled, so there's no visible changes to anyone in fact.
There are some changes needed to prevent devices re-enumeration on
every Cycles session create.
Reviewers: juicyfruit, lukasstockner97, dingto, brecht
Reviewed By: lukasstockner97, dingto
Differential Revision: https://developer.blender.org/D1720
Although the code made it impossible to use time_start_ uninitialized, at least GCC did
still produce multiple warnings about it.
Since time_dt() is an extremely cheap operation and functionality does not change in any way when
removing the check in the constructor, this commit removes the check and therefore the warning.
This patch adds the "Hilbert Spiral", a custom-designed continuous space-filling curve, as a tile order for rendering in Cycles.
It essentially works by dividing the tiles into tile blocks which are processed in a spiral outwards from the center. Inside each
block, the tiles are processed in a regular Hilbert curve pattern. By rotating that pattern according to the spiral direction,
a continuous curve is obtained, which helps with cache coherency and therefore rendering speed.
The curve is a compromise between the faster-rendering Bottom-to-Top etc. orders and the Center order, which is a bit slower,
but starts with the more important areas. The Hilbert Spiral also starts in the center (unless huge tiles are used) and is still
marginally slower than Bottom-to-Top, but noticeably faster than Center.
Reviewers: sergey, #cycles, dingto
Reviewed By: #cycles, dingto
Subscribers: iscream, gregzaal, sergey, mib2berlin
Differential Revision: https://developer.blender.org/D1166
This change is for a few reasons:
- it works with color, and (therefore) will need to be color managed, at
some point. This will be much easier to do if the code is closer to the
actual color management code (in Blender's core, so to speak).
- it has nothing to do with the actual fire simulation, as it is just
used to create a lookup table
- it can be reused for other purposes (i.e. in Blender internal
renderer, if people are interrested in a blackbody node à la Cycles)
- cleanup: some functions (`contrain_rgb`, `xyz_to_rgb`) already exist
in BLI
Reviewers: brecht
Reviewed By: brecht
Subscribers: brecht
Differential Revision: https://developer.blender.org/D1719
If anyone finds OS X UI drawing glitches with different graphics cards please
report them and I'll add an exception specifically for Intel, but in theory this
should work fine for all graphics cards.
While previous code was already compiling with OSL 1.6 it was using some symbols
which were considered deprecated in upstream.
This commit adds some ifdefs, but soon we'll get rid of all them rather soon
with the upcoming OIIO/OSL update.
Patch from be28706 made it so integrator will use last shader's transparent
shadow flag, which is wrong since last shader might not have transparent
shadow while shaders prior to it might have one.
CYCLES_OPENCL_TEST was removed, there was an insonsistency between
opencl_kernel_use_split() and opencl_get_usable_devices().
From now on, to test non whitelisted devices please use either
CYCLES_OPENCL_MEGA_KERNEL_TEST or CYCLES_OPENCL_SPLIT_KERNEL_TEST.
This commit changes the way how we pass bounce information to the Light
Path node. Instead of manualy copying the bounces into ShaderData, we now
directly pass PathState. This reduces the arguments that we need to pass
around and also makes it easier to extend the feature.
This commit also exposes the Transmission Bounce Depth to the Light Path
node. It works similar to the Transparent Depth Output: Replace a
Transmission lightpath after X bounces with another shader, e.g a Diffuse
one. This can be used to avoid black surfaces, due to low amount of max
bounces.
Reviewed by Sergey and Brecht, thanks for some hlp with this.
I tested compilation and usage on CPU (SVM and OSL), CUDA, OpenCL Split
and Mega kernel. Hopefully this covers all devices. :)
While SCons building system was serving us really good for ages it's no longer
having much attention by the developers and started to become quite a difficult
task to maintain.
What's even worse -- there started to be quite serious divergence between SCons
and CMake which was only accumulating over the releases now. The fact that none
of the active developers are really using SCons and that our main studio is also
using CMake spotting bugs in the SCons builds became quite a difficult task and
we aren't always spotting them in time.
Meanwhile CMake became really mature building system which is available on every
platform we support and arguably it's also easier and more robust to use.
This commit includes:
- Removal of actual SCons building system
- Removal of SCons git submodule
- Removal of documentation which is stored in the sources and covers SCons
- Tweaks to the buildbot master to stop using SCons submodule
(this change requires deploying to the server)
- Tweaks to the install dependencies script to skip installing or mentioning
SCons building system
- Tweaks to various helper scripts to avoid mention of SCons folders/files
as well
Reviewers: mont29, dingto, dfelinto, lukastoenne, lukasstockner97, brecht, Severin, merwin, aligorith, psy-fi, campbellbarton, juicyfruit
Reviewed By: campbellbarton, juicyfruit
Differential Revision: https://developer.blender.org/D1680
The issue was caused by OSL using TLS which is required to be freed before the
Cycles session is freed. This is quite tricky to do in Cycles because different
render session are sharing the same task scheduler, so when one session is being
freed TLS might need to be active still.
In order to solve this, we are now doing JIT optimization ahead of the time
which ensures either TLS of JIT is freed before the render on multi-core system
or freed on OSLRenderSession destroy on single-core system.
This might increase synchronization time due to JIT of unused function, but
that we can solve later with some smart idea,
This commit overrides the user's choice of tile order in the case of viewport rendering and always uses bottom-to-top instead.
This was already done until the TileManager redesign, but since it removed the distinction between viewport and regular rendering
in the manager, the viewport was now also using the selected order. Since this requires sorting of the generated tiles,
it slows down rendering a bit. With the forced bottom-to-top order, this sorting step can now be avoided again.
Since the tile order is invisible anyways for viewport rendering, this commit won't have any impact on users (apart from a slight speedup).
This commit adds "Bands Saw" and "Rings Saw" to the options for the Wave texture node in Cycles, behaving similar to the Saw option in BI textures.
Requested by @cekuhnen on BA.
Reviewers: dingto, sergey
Subscribers: cekuhnen
Differential Revision: https://developer.blender.org/D1699
This is an attempt to emulate real CMOS cameras which reads sensor by scanlines
and hence different scanlines are sampled at a different moment in time, which
causes so called rolling shutter effect. This effect will, for example, make
vertical straight lines being curved when doing horizontal camera pan.
This is controlled by the Shutter Type option in the Motion Blur panel.
Additionally, since scanline sampling is not instantaneous it's possible to have
motion blur on top of rolling shutter.
This is controlled by the Rolling Shutter Time slider which controls balance
between pure rolling shutter effect and pure motion blur effect.
Reviewers: brecht, juicyfruit, dingto, keir
Differential Revision: https://developer.blender.org/D1624
Vector mapping node was doing some weird mapping of both original and mapped
coordinates. Mapping of original coordinates was caused by the clamping nature
of the LUT generated from the node. Mapping of the mapped value again was quite
totally obscure -- one needed to constantly keep in mind that actual value will
be scaled up and moved down.
This commit makes it so values in the vector curve mapping are always absolute.
In fact, it is now behaving quite the same as RGB curve mapping node and the
code could be de-duplicated. Keeping the code duplicated for a bit so it's more
clear what exact parts of the node changed.
Reviewers: brecht
Subscribers: bassamk
Differential Revision: https://developer.blender.org/D1672
This gives about 2x speedup (3.2sec vs. 11.9sec with 32716 handled nodes) when
updating shader for the shader tree.
Reviewers: brecht, juicyfruit, dingto, lukasstockner97
Differential Revision: https://developer.blender.org/D1700
This makes it possible to move some parts of evaluation from host to the device
and hopefully reduce memory usage by avoid having full RGBA buffer on the host.
Reviewers: juicyfruit, lukasstockner97, brecht
Reviewed By: lukasstockner97, brecht
Differential Revision: https://developer.blender.org/D1702
Main goal is to make kernel signatures editing easier and less prone to the
errors caused by missing function signature update or so.
This will also make it easier to add new CPU architectures.
Reviewers: juicyfruit, dingto, lukasstockner97, brecht
Reviewed By: dingto, lukasstockner97, brecht
Differential Revision: https://developer.blender.org/D1703
