Ensure compression is enabled by using shader_read
flag only. Also ensure that MTLTexture contents
remain in optimal layout for reading after any
data modifications.
Authored by Apple: Michael Parkin-White
Pull Request: https://projects.blender.org/blender/blender/pulls/106234
The issue was caused by uninitialized offset used for the scale
variable.
Follow the rest of the usages of the operation which initialize
it explicitly. This makes it very safe and easy fix to backport
to any LTS or corrective release.
Ideally should probably initialize all members in the class
itself, to avoid such situations in the future.
Pull Request: https://projects.blender.org/blender/blender/pulls/106325
The cycling method for the viewer connection starts searching from the next socket
after the last current connection. If a geometry socket is is the last connected
output this caused the method to jump to the next socket after the geometry,
potentially skipping over valid data sockets that are not viewed yet.
The solution is to ignore the geometry sockets in the cycling entirely and only
consider data sockets (i.e. non-geometry sockets).
Pull Request: https://projects.blender.org/blender/blender/pulls/106318
The insert key operator allowed to insert a keyframe on all selected FCurves
and on the Active FCurve at cursor value.
But it didn't allow to insert a keyframe only on the active FCurve.
This patch adds that. It is available in the redo panel and under Key->Insert Keyframes (which can also be called with the I hotkey)
Pull Request: https://projects.blender.org/blender/blender/pulls/106307
This change aimed to solve the following issues:
- Possible threading issue of two tests writing to the same
file, depending on how the ctest is invoked
- Test using the release directory, and potentially leaving
temp file behind on test failure, breaking code sign on
macOS.
Pull Request: https://projects.blender.org/blender/blender/pulls/106311
Found together with a fix for #106043.
Edge panning (in Node Editors, Outliner and VSE) does unnecessary
updates when the view has not changed at all. This includes adding
`MOUSEMOVE` events (even if you dont move the mouse at all).
Adding `MOUSEMOVE` events results in the transform system constantly running (even if you dont move the mouse) which we certainly want to avoid.
Rectify this by only calling these updates when the view changes.
Pull Request: https://projects.blender.org/blender/blender/pulls/106301
The fix for #105363 (6d3ce8273a) made the transform system respect
(Frame) nodes `offsetx`/`offsety`.
Now Node Editors run the transform system even if the mouse is still (due to edge panning -- unnecessarily, see PR #106301 for fixing this). And due to the way `frame_node_prepare_for_draw` recalculates these offsets (based on
on updated positions and `node.runtime->totr` [which in turn gets rounded in `node_update_basis` -- so subpixel precision is lost there, see [1]]), this can lead to slight imprecisions/noise/jitter during transform (if we use float offsets, see the PR for more info).
So to counter this, use rounded offsets now [which will keep the whole circle stable].
NOTE: PR #106301 would fix this already for having the cursor still, but this patch still improves slight jitter when moving, so will commit separately.
[1] comment from `node_update_basis`
> /* Round the node origin because text contents are always pixel-aligned. */
Pull Request: https://projects.blender.org/blender/blender/pulls/106096
No user visible changes expected.
For brush assets, we need a way to store a reference to a brush in .blend files, so that the last active brush can be restored from the file. See #101908. It seems like a generally useful thing to have.
Adds a new DNA struct to store a "weak" asset reference, that is, a reference that can break under a number of circumstances, but should work reliably enough under normal usage. There's no way to reliably reference an asset currently, so this works on a "best effort" basis. It can break when assets are moved inside the asset library, asset libraries are unregistered from the Preferences, or a file is opened on a different machine with different Preferences, for example. It can also break currently if an asset library is renamed.
It contains:
- Information to identify the asset library the asset can be found in.
- A relative "identifier" (currently a relative path) for the asset within the asset library.
There's further code to resolve a weak reference to file paths and Blender library paths.
Part of #101908.
Co-authored-by: Bastien Montagne <bastien@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/105603
The goal is to solve confusion of the "All rights reserved" for licensing
code under an open-source license.
The phrase "All rights reserved" comes from a historical convention that
required this phrase for the copyright protection to apply. This convention
is no longer relevant.
However, even though the phrase has no meaning in establishing the copyright
it has not lost meaning in terms of licensing.
This change makes it so code under the Blender Foundation copyright does
not use "all rights reserved". This is also how the GPL license itself
states how to apply it to the source code:
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software ...
This change does not change copyright notice in cases when the copyright
is dual (BF and an author), or just an author of the code. It also does
mot change copyright which is inherited from NaN Holding BV as it needs
some further investigation about what is the proper way to handle it.
When hitting the "normalize" button in the graph editor, set the y extents of the view to the extents of the `FCurves`.
Previously you had to search for your curves after pressing that button.
Pull Request: https://projects.blender.org/blender/blender/pulls/105857
Similar to recent OBJ UV values merging commit (05a63e3705) - build
mapping of (vertex, UV) by going over the face loops directly, instead
of using BKE_mesh_uv_vert_map_get_vert and then having an additional
map on top. Provide the mapping into ready to use flat arrays, instead
of building a map and then building arrays out of that in a separate
pass.
While at it, avoid the extra cost of building all this complicated
mapping when we don't have or are not exporting UVs.
Timing tests on exporting several models into binary PLY file
(Win10, Ryzen 5950X):
- Suzanne subdivided to level 6 (2.1M verts): 0.93s -> 0.68s
- Rungholt Minecraft level (9.7M verts): 3.3s -> 2.3s
- Stanford Lucy 3D scan (14.0M verts, no UVs): 5.2s -> 1.5s
This is preparation for #106228, the crash does not happen in `main` currently.
The issue was `positions_for_write` might make a copy of the data if it was
shared. This operation is not thread safe on a single mesh. The solution is to
get write-access to the positions only once before threading starts.
For example
```
OIIOOutputDriver::~OIIOOutputDriver()
{
}
```
becomes
```
OIIOOutputDriver::~OIIOOutputDriver() {}
```
Saves quite some vertical space, which is especially handy for
constructors.
Pull Request: https://projects.blender.org/blender/blender/pulls/105594
The UI needs persistent pointers to catalog paths that it can pass
around via context. It was trying to manage this in own storage, but
this didn't work. Not entirely sure why - the menus get redrawn
continuously while assets load, and the root menu rebuilds the mentioned
storage every time. Maybe the submenus redraw a bit later, or the
keyboard navigation handling still accessed data from a previous redraw
somehow.
Either way, instead of managing own catalog path storage, point into the
asset system, which already has persistent storage for the catalog
paths.
Pull Request: https://projects.blender.org/blender/blender/pulls/106237
Don't install libraries in blender.shared and don't generate manifest
as it's not working and not important to have a clean directory here.
Always detect MSVC_REDIST_DIR as it is used by oneAPI. The way
InstallRequiredSystemLibraries is called it already only sets some
variables and doesn't install anything by itself.
Pull Request: https://projects.blender.org/blender/blender/pulls/105999
The overall goal is to use implicit-sharing in many places in Blender
that currently do unnecessary copies. See #95845 for more details.
This commit only adds the base data structures in blenlib and uses those
in `GeometrySet` and `AnonymousAttributeID`, which used a more ad-hoc
version of implicit sharing already. #105994 lists some more places where
support for implicit sharing can be added (most notably: custom data layers).
Pull Request: https://projects.blender.org/blender/blender/pulls/105994
Previous fix/hack a60f651502 made it so that all 'Fake User' linked
IDs are considered as directly linked, so that some IDs (like linked
Text) references are not lost on file save becaus they are not
effectively used.
However, this created unwanted references to all linked assets data,
because an asset always has its fake user set. This ended up keeping
lots of references to sub-assets when appending from the new Essentials
node groups.
NOTE: This is adding another hack to the collection, the whole handling
of 'which unused linked data reference to keep on file save' needs to be
reworked for Blender 3.6.
No user visible changes expected.
With this, empty rows will be added to the tree view so that the
background box is at least a few lines high (like with UI lists). If the
view is used as a drop target, data can be dropped on these empty rows
too then.
This was requested for the Cycles light linking project.
This PR adds support for clearing framebuffers and scissor testing.
Tweaks had to be made to VKTexture to keep track of its layout
on the device. Based on the actual call the layout can switch
to a more optimum layout.
For example during upload of a texture the texture will be converted
to a transfer destination optimized layout. When reading from the
texture it will be converted to a transfer source optimized layout.
The order of the attachments in the framebuffer follows the next rules
- When only color attachments are there the color attachments will
be placed in the slot they are defined. This way it will match
the ShaderCreateInfo binding location.
- When a stencil/depth attachment is added it will be placed
right after the color attachments. When there isn't a color
attachment it will be the first attachment.
Pull Request: https://projects.blender.org/blender/blender/pulls/106044
A few small refactors of the `draw_setting_widget()` function for drawing
animation channel widgets (like 'modifier mute', etc.)
- Use `const` where appropriate.
- Move some variable declarations to their actual use, to clarify their
scope and make it possible to use `const`.
- Return earlier where possible, which should improve performance as some
unnecessary code gets skipped.
No functional changes.
