Previously, it was only possible to inspect the data from the first iteration. That
applied to both, the viewer node as well as socket inspection. Now, there is a
new `Inspection Index` setting in the zone properties. It specifies which iteration
should be used by the inspection features.
In theory we could support features like counting the index from the end, but
that can be done separately as well, as it likely requires more UI.
Pull Request: https://projects.blender.org/blender/blender/pulls/112818
The `lib_link` callback cannot always be fully replaced/removed, as in
some case it is also doing some validation checks, or data editing based
on the result of lib_linking internal ID pointers.
The callback has been renamed for that purpose, from `read_lib` to
`read_after_liblink`. It is now called after all ID pointers have been
fully lib-linked for the current ID, but still before the call to
`do_versions_after_linking`.
This change should not have any behavioral effect. Although in theory
the side-effect of this commit (to split lib linking itself, and the
validation/further processing code) into two completely separated steps
could have some effects, in practice none are expected, and tests did
not show any changes in behavior either..
Part of implementing #105134: Removal of readfile's lib_link & expand code.
Listing the "Blender Foundation" as copyright holder implied the Blender
Foundation holds copyright to files which may include work from many
developers.
While keeping copyright on headers makes sense for isolated libraries,
Blender's own code may be refactored or moved between files in a way
that makes the per file copyright holders less meaningful.
Copyright references to the "Blender Foundation" have been replaced with
"Blender Authors", with the exception of `./extern/` since these this
contains libraries which are more isolated, any changed to license
headers there can be handled on a case-by-case basis.
Some directories in `./intern/` have also been excluded:
- `./intern/cycles/` it's own `AUTHORS` file is planned.
- `./intern/opensubdiv/`.
An "AUTHORS" file has been added, using the chromium projects authors
file as a template.
Design task: #110784
Ref !110783.
This adds support for running a set of nodes repeatedly. The number
of iterations can be controlled dynamically as an input of the repeat
zone. The repeat zone can be added in via the search or from the
Add > Utilities menu.
The main use case is to replace long repetitive node chains with a more
flexible alternative. Technically, repeat zones can also be used for
many other use cases. However, due to their serial nature, performance
is very sub-optimal when they are used to solve problems that could
be processed in parallel. Better solutions for such use cases will
be worked on separately.
Repeat zones are similar to simulation zones. The major difference is
that they have no concept of time and are always evaluated entirely in
the current frame, while in simulations only a single iteration is
evaluated per frame.
Stopping the repetition early using a dynamic condition is not yet
supported. "Break" functionality can be implemented manually using
Switch nodes in the loop for now. It's likely that this functionality
will be built into the repeat zone in the future.
For now, things are kept more simple.
Remaining Todos after this first version:
* Improve socket inspection and viewer node support. Currently, only
the first iteration is taken into account for socket inspection
and the viewer.
* Make loop evaluation more lazy. Currently, the evaluation is eager,
meaning that it evaluates some nodes even though their output may not
be required.
Pull Request: https://projects.blender.org/blender/blender/pulls/109164
This refactors how a geometry nodes node tree is converted to a lazy-function
graph. Previously, all nodes were inserted into a single graph. This was fine
because every node was evaluated at most once per node group evaluation.
However, loops (#108896) break this assumption since now nodes may be
evaluated multiple times and thus a single flat graph does not work anymore.
Now, a separate lazy-function is build for every zone which gives us much
more flexibility for what can happen in a zone. Right now, the change only
applies to simulation zones since that's the only kind of zone we have.
Technically, those zones could be inlined, but turning them into a separate
lazy-function also does not hurt and makes it possible to test this refactor
without implementing loops first. Also, having them as separate functions
might help in the future if we integrate a substep loop directly into the
simulation zone.
The most tricky part here is to just link everything up correctly, especially
with respect to deterministic anonymous attribute lifetimes. Fortunately,
correctness can be checked visually by looking at the generated graphs.
The logging/viewer system also had to be refactored a bit, because now there
can be multiple different `ComputeContext` in a single node tree. Each zone
is in a separate `ComputeContext`. To make it work, the `ViewerPath` system
now explicitly supports zones and drawing code will look up the right logger
for showing inspection data.
No functional changes are expected, except that the spreadsheet now shows
"Simulation Zone" in the context path if the viewer is in a simulation.
A lot of files were missing copyright field in the header and
the Blender Foundation contributed to them in a sense of bug
fixing and general maintenance.
This change makes it explicit that those files are at least
partially copyrighted by the Blender Foundation.
Note that this does not make it so the Blender Foundation is
the only holder of the copyright in those files, and developers
who do not have a signed contract with the foundation still
hold the copyright as well.
Another aspect of this change is using SPDX format for the
header. We already used it for the license specification,
and now we state it for the copyright as well, following the
FAQ:
https://reuse.software/faq/
The usage of the lib pointer was cryptic to say the least, it was
essentialy used to allow or not local IDs results in the mapping
old_id_pointer -> new_id_pointer lookup result.
Now:
- Explicitely pass a boolean to allow or not local ID as result in
lower-level code.
- Pass the 'self ID' pointer instead of its library to the whole
liblinking code (that was already the case in a few places).
Note that naming of the 'self id' pointer is currently very inconsistent
throughout the readfile liblink code, this will have to be cleaned up in
a separate step later. For now, `self_id` has been chosen for new code
as it matches the terminology in lib_query code.
The later change can also allow finer handling of lookup on undo, based
on how it was re-read (or not), should the need for this arise.
This patch adds an integer identifier to nodes that doesn't change when
the node name changes. This identifier can be used by different systems
to reference a node. This may be important to store caches and simulation
states per node, because otherwise those would always be invalidated
when a node name changes.
Additionally, this kind of identifier could make some things more efficient,
because with it an integer is enough to identify a node and one does not
have to store the node name.
I observed a 10% improvement in evaluation time in a file with an extreme
number of simple math nodes, due to reduced logging overhead-- from
0.226s to 0.205s.
Differential Revision: https://developer.blender.org/D15775
This adds support for showing geometry passed to the Viewer in the 3d
viewport (instead of just in the spreadsheet). The "viewer geometry"
bypasses the group output. So it is not necessary to change the final
output of the node group to be able to see the intermediate geometry.
**Activation and deactivation of a viewer node**
* A viewer node is activated by clicking on it.
* Ctrl+shift+click on any node/socket connects it to the viewer and
makes it active.
* Ctrl+shift+click in empty space deactivates the active viewer.
* When the active viewer is not visible anymore (e.g. another object
is selected, or the current node group is exit), it is deactivated.
* Clicking on the icon in the header of the Viewer node toggles whether
its active or not.
**Pinning**
* The spreadsheet still allows pinning the active viewer as before.
When pinned, the spreadsheet still references the viewer node even
when it becomes inactive.
* The viewport does not support pinning at the moment. It always shows
the active viewer.
**Attribute**
* When a field is linked to the second input of the viewer node it is
displayed as an overlay in the viewport.
* When possible the correct domain for the attribute is determined
automatically. This does not work in all cases. It falls back to the
face corner domain on meshes and the point domain on curves. When
necessary, the domain can be picked manually.
* The spreadsheet now only shows the "Viewer" column for the domain
that is selected in the Viewer node.
* Instance attributes are visualized as a constant color per instance.
**Viewport Options**
* The attribute overlay opacity can be controlled with the "Viewer Node"
setting in the overlays popover.
* A viewport can be configured not to show intermediate viewer-geometry
by disabling the "Viewer Node" option in the "View" menu.
**Implementation Details**
* The "spreadsheet context path" was generalized to a "viewer path" that
is used in more places now.
* The viewer node itself determines the attribute domain, evaluates the
field and stores the result in a `.viewer` attribute.
* A new "viewer attribute' overlay displays the data from the `.viewer`
attribute.
* The ground truth for the active viewer node is stored in the workspace
now. Node editors, spreadsheets and viewports retrieve the active
viewer from there unless they are pinned.
* The depsgraph object iterator has a new "viewer path" setting. When set,
the viewed geometry of the corresponding object is part of the iterator
instead of the final evaluated geometry.
* To support the instance attribute overlay `DupliObject` was extended
to contain the information necessary for drawing the overlay.
* The ctrl+shift+click operator has been refactored so that it can make
existing links to viewers active again.
* The auto-domain-detection in the Viewer node works by checking the
"preferred domain" for every field input. If there is not exactly one
preferred domain, the fallback is used.
Known limitations:
* Loose edges of meshes don't have the attribute overlay. This could be
added separately if necessary.
* Some attributes are hard to visualize as a color directly. For example,
the values might have to be normalized or some should be drawn as arrays.
For now, we encourage users to build node groups that generate appropriate
viewer-geometry. We might include some of that functionality in future versions.
Support for displaying attribute values as text in the viewport is planned as well.
* There seems to be an issue with the attribute overlay for pointclouds on
nvidia gpus, to be investigated.
Differential Revision: https://developer.blender.org/D15954
