Replace old color pipeline which was supporting linear/sRGB color spaces
only with OpenColorIO-based pipeline.
This introduces two configurable color spaces:
- Input color space for images and movie clips. This space is used to convert
images/movies from color space in which file is saved to Blender's linear
space (for float images, byte images are not internally converted, only input
space is stored for such images and used later).
This setting could be found in image/clip data block settings.
- Display color space which defines space in which particular display is working.
This settings could be found in scene's Color Management panel.
When render result is being displayed on the screen, apart from converting image
to display space, some additional conversions could happen.
This conversions are:
- View, which defines tone curve applying before display transformation.
These are different ways to view the image on the same display device.
For example it could be used to emulate film view on sRGB display.
- Exposure affects on image exposure before tone map is applied.
- Gamma is post-display gamma correction, could be used to match particular
display gamma.
- RGB curves are user-defined curves which are applying before display
transformation, could be used for different purposes.
All this settings by default are only applying on render result and does not
affect on other images. If some particular image needs to be affected by this
transformation, "View as Render" setting of image data block should be set to
truth. Movie clips are always affected by all display transformations.
This commit also introduces configurable color space in which sequencer is
working. This setting could be found in scene's Color Management panel and
it should be used if such stuff as grading needs to be done in color space
different from sRGB (i.e. when Film view on sRGB display is use, using VD16
space as sequencer's internal space would make grading working in space
which is close to the space using for display).
Some technical notes:
- Image buffer's float buffer is now always in linear space, even if it was
created from 16bit byte images.
- Space of byte buffer is stored in image buffer's rect_colorspace property.
- Profile of image buffer was removed since it's not longer meaningful.
- OpenGL and GLSL is supposed to always work in sRGB space. It is possible
to support other spaces, but it's quite large project which isn't so
much important.
- Legacy Color Management option disabled is emulated by using None display.
It could have some regressions, but there's no clear way to avoid them.
- If OpenColorIO is disabled on build time, it should make blender behaving
in the same way as previous release with color management enabled.
More details could be found at this page (more details would be added soon):
http://wiki.blender.org/index.php/Dev:Ref/Release_Notes/2.64/Color_Management
--
Thanks to Xavier Thomas, Lukas Toene for initial work on OpenColorIO
integration and to Brecht van Lommel for some further development and code/
usecase review!
Initial idea of this input was re-designed in a bit more flexible
way using modifiers.
Also since Color Balance (which was the only thing using effect
mask input) was moved to the modifiers, this input field became
rudiment.
It's pretty tricky to write versioning code to prevent possible
data in cases this field was used, but hope it wouldn't be difficult
to switch to modifiers masks.
Having two ways to control color balance now seems a bit overkill
and not clear.
Removed old Color Balance settings from the interface and logic,
added versioning code to convert this settings to modifier.
Unfortunately, since color balance was a pointer, it's not actually
possible to preserve compatibility of old files saved in new
blender and opened back in old blender.
Hopefully there's no regressions :)
After 2.63 there was a bugfix to take object scale into account for the duplicated
objects, but this breaks compatibility on earlier files. Now there is an option to
control if the scale should be used or not.
Scale is used by default on newer files, and not used on older ones.
This implements basic color grading modifiers in sequencer, supporting
color balance, RGB curves and HUE corrections.
Implementation is close to object modifiers, some details are there:
http://wiki.blender.org/index.php/User:Nazg-gul/SequencerModifiers
Modifiers supports multi-threaded calculation, masks and instant
parameter changes.
Also added cache for pre-processed image buffers for current frame,
so changing sequence properties does not require rendering of original
sequence (like rendering scene, loading file from disk and so)
This implements option which could be used to color balance only
specified area. Currently done by adding Mask input to Adjustment
effect. Affects on color balance and multiply settings.
Supporting masked saturation control is in the list, not supported
in this commit.
Also show value slider in the right of color wheel.
Error flags set on Drivers and F-Curves when they can't be evaluated or flushed
properly are now cleared when loading files, allowing drivers to be re-evaluated
when a file is reloaded. This means that if a driver couldn't be used in the
previous session due to the set of extension modules active at the time (and was
thus disabled), reloading the file with the necessary extensions loaded means
that the driver can work out of the box without manually re-enabling.
Issue was caused by performing conversion from FTFaces to materials from
the end of lib_link_mesh, where tesselated faces were cleared already.
This conversion can't be switched to BMesh structures because in future
MTexPolys could be changed in a way, that versioning stuff wouldn't work
any more. Another issue is that making such a conversion per-mesh would
lead to quite a code spagetti, which is difficult to follow.
Solved by splitting per-mesh cycle in lib_link_mesh, so now it consists
of three steps:
- Do linking stuff such as custom data layers, materials. Perform a
Conversion stuff like tessface -> polys.
- Convert all MTFaces to materials. This conversion handles all meshes
and creates needed materials.
- Free tessfaces, mark mesh as linked.
Such a separation shouldn't noticeably affect on speed of linking.
- Fixed issues with calculating matte with balance != 0.5
It used to be used concave combination of minimal and maximal
channel values which could be inpredictable.
Use concave combination of two non-major channels sorted
by their index, so such combination would always use the same
coefficients for particular non-major channels.
- Added despill balance slider which defines balance between
non-major channels used for calculating average of two
colors. Difference between average value and pixel value of
major screen channel defines amount of despill. Balance of
0.5 gives the same behavior as it was before this slider
was added.
---
svn merge -r48678:48679 -r48789:48790 ^/branches/soc-2011-tomato
(From personal stash of bugs - since early 2.5 versions)
F-Curve colors get applied only on Graph Editor "refresh()". In some cases, undo
was reverting back to a state where the colors had not yet been set. In these
cases, there would be no refresh() after that undo (until expanding a channel or
some other similar action), resulting in "black F-Curves" appearing. So, now we
force such an update after undo to ensure that the curves never display black.
(Noticed while investigating another bug for Mango related to
CLIP_OT_constraint_to_fcurve not sending notifiers required when new F-Curves
are added)
