Without ray offsets intersections at neigbhoring triangles are found, as
the ray start is exactly at the vertex. There was a small offset towards
the center of the triangle, but not enough.
Now this offset computation is moved into Cycles and modified for better
results. It's still not perfect though like any offset approach, especially
with long thin triangles.
Additionaly, this uses the shadow terminate offset for AO rays now, which
helps remove some pre-existing artifacts.
Also fix a couple other places where normals layers weren't properly
tagged dirty or reallocated when the mesh changes.
Caused by cfa53e0fbe. When the size of a mesh changes,
the normal layers need to be reallocated. There were a couple of places
that cleared other runtime data with `BKE_mesh_runtime_clear_geometry`
but didn't deal with normals properly. Clearing the runtime "geometry"
is different from clearing the normals, because sometimes the size of
the normal layers doesn't have to change, in which case simply tagging
them dirty is fine.
When X-ray mode is active the selection is done using the mesh data to
select what is closest to the cursor. When GPU subdivision is active with
the "show on cage" modifier option, this fails as the mesh used for selection
is the unsubdivided one.
This creates a subdivision wrapper before running the selection routines to
ensure that subdivision is available on the CPU side as well.
Differential Revision: https://developer.blender.org/D14188
This was a double free error which happened because `BM_mesh_bm_from_me`
was taking ownership of arrays that were still owned by the Mesh. Note that
this only happens when the mesh is empty but some custom data layers still
have a non-null data pointer. While usually the data pointer should be null in
this case for performance reasons, other functions should still be able to
handle this situation.
Differential Revision: https://developer.blender.org/D14181
When exporting generated coordinates, the subdivision export code was
using the schema for the non-subdivision case, which is invalid as
non-initialized. This typo existed since the initial commit for the
feature (rBf9567f6c63e75feaf701fa7b78669b9a436f13dd).
The scale-to-fit option did nothing for single words when
the text box had a height. This happened because it was expected that
text would be wrapped however single words never wrap.
Now the same behavior for zero-height text boxes is used when text
can't be wrapped onto multiple lines.
0fd72a98ac called functions to set bezier handle positions
that used uninitialized memory. The fix is to define the handle positions
explicitly, like before.
Drag Action was constantly resetting itself to "move".
Solve this by storing the tool settings per tool and no longer clear
gizmo properties when activating a new tool.
Currently, when normals are calculated for a const mesh, a custom data
layer might be added if it doesn't already exist. Adding a custom data
layer to a mesh is not thread-safe, so this can be a problem in some
situations.
This commit moves derived mesh normals for polygons and
vertices out of `CustomData` to `Mesh_Runtime`. Most of the
hard work for this was already done by rBcfa53e0fbeed7178.
Some changes to logic elsewhere are necessary/helpful:
- No need to call both `BKE_mesh_runtime_clear_cache` and
`BKE_mesh_normals_tag_dirty`, since the former also does the latter.
- Cleanup/simplify mesh conversion and copying since normals are
handled with other runtime data.
Storing these normals like other runtime data clarifies their status
as derived data, meaning custom data moves more towards storing
original/editable data. This means normals won't automatically benefit
from the planned copy-on-write refactor (T95845), so it will have to be
added manually like for the other runtime data.
Differential Revision: https://developer.blender.org/D14154
Currently the RNA functions to add mesh elements like vertices
don't clear the runtime cache of things like triangulation, BVH
trees, etc. This is important, since they might be accessed with
incorrect sizes. This is split from a fix for T95839.
Atomic operations performed by the C++ standard library might require
libatomic on platforms which do not have hardware support for those
operations.
This change makes it that such configurations are automatically detected
and -latomic is added when needed.
Differential Revision: https://developer.blender.org/D14106
There was accidentally some displacement related code running even when not
using displacement.
Differential Revision: https://developer.blender.org/D14169
Previously, objects and geometries were mapped between frames
using different hash tables in a way that is incompatible with
geometry instances. That is because the geometry mapping happened
without looking at the `persistent_id` of instances, which is not possible
anymore. Now, there is just one mapping that identifies the same
object at multiple points in time.
There are also two new caches for duplicated vbos and textures used for
motion blur. This data has to be duplicated, otherwise it would be freed
when another time step is evaluated. This caching existed before, but is
now a bit more explicit and works for geometry instances as well.
Differential Revision: https://developer.blender.org/D13497
Reset Defaults left the undo stack in an invalid state,
with the active undo step left at the previous state then it should
have been.
Now the buttons own undo logic is used to perform undo pushes.
- No need for `normal_tx` array if we normalize the planes in `plane_tx`.
- No need to calculate the distance squared to a plane (with `dist_signed_squared_to_plane_v3`) if the plane is normalized. `plane_point_side_v3` gets the real distance, accurately, efficiently and also signed.
So normalize the planes of the member `CameraViewFrameData::plane_tx`.
This is a regression partially introduced in rB0a6f428be7f0.
Bones being transformed into edit mode were snapping to themselves.
And the bones of the pose mode weren't even snapping.
(Curious that this was not reported).
Since Python 3.10 is now supported on all platform,
bump the minimum version to reduce the number of Python versions that
need to be supported simultaneously.
Reviewed By: LazyDodo, sybren, mont29, brecht
Ref D13943
This is an alternate fix for T35170 since it caused T44415.
Having the undo system manipulate the key-block coordinates is error
prone as (in the case of T44415) there are situations when it's
important to apply the difference with the original shape key.
This reverts dab0bd9de6, and instead
avoids the problem by not using the data in `Mesh.key` as a reference
for updating shape-keys when exiting edit-mode.
The assumption that the `Mesh.key` in edit-mode won't be modified
until leaving edit-mode isn't always true. Leading to synchronization
errors. (details noted in code-comments).
Resolve this by using shape-key data stored in the BMesh.
Resolving both T35170 & T44415.
Details:
- Remove use of the original vertices when exiting edit mode.
- Remove use of the original shape-key coordinates when exiting
edit-mode (except as a last resort).
- Move shape-key synchronization into a separate function:
`bm_to_mesh_key`.
- Split the synchronization loop into two branches,
depending on the existence of BMesh shape-key coordinates.
- Always write shape-key values back to the BMesh CD_SHAPEKEY layers.
This was only done in some cases but is now necessary for all
shape-keys as these are used to calculate offsets where the `Mesh.key`
was previously used.
- Report a warning when the shape-key layer isn't found as this uses an
imperfect method of restoring coordinates which should only be used as
a last resort.
Reviewed By: mont29
Ref D14127
The problem was when the Object Offset was enabled because the Constant Offset flag was not checked and the offset always was added to the transformation matrix.
Limit the min and max of the IDProperty for the node group input
from 0 to infinity, and the soft min and max between 0 and 1.
Thanks to @PratikPB2123 for investigation.
Instead of accessing the `CD_NORMAL` layer directly,
use the proper API for accessing mesh normals. Even if the
layer exists, the values might be incorrect due to a deformation.
Related to ef0e21f0ae, 969c4a45ce, and T95839.
The flags overlapped ever since normalize was added, so this requires
versioning to copy the flag value.
Differential Revision: https://developer.blender.org/D14165
The code was using the same flag value for different modifiers,
resulting in matching the toggle to random overlapping flags.
Differential Revision: https://developer.blender.org/D14165
When RMB-select uses "Select Tweak" as a fallback tool,
ignore all bindings mapped to the Control key as these are
used for path selection.
This was fixed in 2a2d873124
however that caused shift-select to fail (T93100).
The node animation versioning code passes `nullptr` to the `oldName` and
`newName` parameters, but those weren't `NULL`-safe. I added an extra
check for this.
No functional changes, just a crash fix.
Althought the float buffers are only used as cache, current code paths
don't look at the flags to identify which kind of image it is. Actual
fix would be to check flags, but that wouldn't be something to add one
week before release.
This commit fixes it by removing the buffers after use in the image
engine.
Bug was introduced in D12167.
Reading input size from an input socket is not possible in tiled compositor before execution is initialized. A similar change was done for the base class, see BlurBaseOperation::init_data().
Reviewed by: Jeroen Bakker
Differential Revision: https://developer.blender.org/D14067
