The Perlin noise algorithms suffer from precision issues when a coordinate
is greater than about 250000.
To fix this the Perlin noise texture is repeated every 100000 on each axis.
This causes discontinuities every 100000, however at such scales this
usually shouldn't be noticeable.
Pull Request: https://projects.blender.org/blender/blender/pulls/119884
for a camera ray, compute the actual range of the hair width that the
current pixel covers, and only integrate that subset, to prevent a
ribbon-like appearance in close-up looks.
When the hair covers less than one pixel on the screen or when the ray
is not camera ray, the model works the same as before.
Pull Request: https://projects.blender.org/blender/blender/pulls/116094
These are now included in the OSL shared libraries, so no reason to
link against it.
The CMake code for WITH_LLVM remains in case it is useful in the future,
but is not enabled by any Blender feature now.
Pull Request: https://projects.blender.org/blender/blender/pulls/118229
This allows users to turn off reflective and refractive caustics
separately from each other when using the Generalized Schlick material.
This will impact the Principled BSDF and Glass BSDF, along with some
custom OSL scripts.
Pull Request: https://projects.blender.org/blender/blender/pulls/117617
Improve the handling of Principled BSDF Caustics from Metallic
and Transmissive components, improving consistency between SVM and OSL,
and offering more predictable results.
Pull Request: https://projects.blender.org/blender/blender/pulls/115081
Along with the 4.1 libraries upgrade, we are bumping the clang-format
version from 8-12 to 17. This affects quite a few files.
If not already the case, you may consider pointing your IDE to the
clang-format binary bundled with the Blender precompiled libraries.
Fix issues related to NaN normals in some situations by trying
to detect when these cases might occur and just reverting back
to default normals.
As a side effect of these changes, OSL now behaves correctly
when given a non-normalized normal.
Pull Request: https://projects.blender.org/blender/blender/pulls/114960
This was required for OSL, which used to be compiled entirely without
RTTI for LLVM. However OSL now only compiles a private part of its code
without RTTI, so this no longer necessary.
Pull Request: https://projects.blender.org/blender/blender/pulls/116035
This path merges the Musgrave and Noise Texture nodes into a single
combined Noise Texture node. The reasoning is that both nodes
intrinsically do the same thing, which is the layering of Perlin noise
derivatives to produce fractal noise. So the patch de-duplicates code
and unifies the use of fractal noise for the end use.
Since the Noise node had a Distortion input and a Color output, while
the Musgrave node did not, those are now available to the Musgrave types
as new functionalities.
The Dimension input of the Musgrave node is analogous to the Roughness
input of the Noise node, so both inputs were unified to follow the same
behavior of the Roughness input, which is arguable more intuitive to
control. Similarly, the Detail input was slightly different across both
nodes, since the Noise node evaluated one extra layer of noise. This was
also unified to follow the behavior of the Noise node.
The patch, coincidentally fixes an unreported bug causing repeated
output for certain noise types and another floating precision bug
#112180.
The versioning code implemented with this patch ensures backward
compatibility for both the Musgrave and Noise Texture nodes. When
opening older Blender files in Blender 4.1 the output of both nodes are
guaranteed to always be exactly identical to that of Blender files
created before the nodes were merged in all cases.
Forward compatibility with Blender 4.0 is implemented by #114236.
Forward compatibility with Blender 3.6 LTS is implemented by #115015.
Pull Request: #111187
Adjust clamping of inputs in the Principled BSDF to avoid errors and
inconsistencies between render engines, while trying to leave as many
inputs as possible unclamped for artisitc purposes.
Pull Request: https://projects.blender.org/blender/blender/pulls/112895
The previous formula for adjusting Coat Tint intensity resulted
in strong tints and sudden colour changes when using a low coat weight.
This commit fixes these issues by mixing between a white tint (no tint)
and the chosen tint based on the Coat Weight.
Pull Request: https://projects.blender.org/blender/blender/pulls/113468
Update the OSL script for the "Geometry" node to follow the correct
Tangent code path when working with point clouds.
There should be no functional change for the end user since the correct
code path was already taken by accident.
Pull Request: https://projects.blender.org/blender/blender/pulls/113472
Update the Glass BSDF to internally use Generalized Schlick fresnel.
This allows for easier expansion of certain features in the future.
There should be no functional change from the users perspective.
Pull Request: https://projects.blender.org/blender/blender/pulls/112701
This keeps the behavior similar to the Disney BRDF, where 0.5
is neutral and lower/higher values respectively decrease/increase
the dielectric specular. But it's more correct in that it's not
an arbitrary scale on Fresnel, but rather adjusting the IOR.
Ref #99447
Ref #112848
Pull Request: https://projects.blender.org/blender/blender/pulls/112552
since the color is applied both at entry and exit, using the square root
of the color would make the perceived color closer to the desired one.
This also makes the transition smoother when changing the `Transmission`
value in the UI, and matches the behaviour of EEVEE.
This was causing a warning when using OSL, since the OSL implementation
didn't implement the input.
Since the socket isn't really implemented on the Blender side anyways,
just get rid of it.
Also, the SVM code uses the shading normal while OSL used the geometric normal.
The SVM logic was changed a while ago to not adjust normals for curves,
but this wasn't applied to OSL as well, causing differences in SVM/OSL renders.
This has two main advantages: First, it allows to get rid of the extra closure
since the remaining float can just be moved to the main closure allocation.
Second, previously sd->N was completely unused and therefore unintialized,
which ended up causing issues for the Normal render pass.
When evaluating emission, no closures can be allocated, so the existing code
would end up returning albedo 1.0, which then caused the layering code to set
the weight of lower layers to zero.
SVM doesn't do this, neither does the OSL testrender from what I can tell, and
in other cases we already handle the inversion on the OSL side if needed.
- Changes defaults from Emission Color 0.0, Emission Strength 1.0 to be the
other way around (Color 1.0, Strength 0.0), suggested by @brecht
- Makes emission component occluded by sheen and coat
(to simulate e.g. dust-covered light sources)
- Moves transparency into the Principled SVM/OSL node, to allow for future
support for e.g. transparent shadows in thin sheet mode.
Note that there are optimization opportunities here (mostly skipping the
non-transparent components for transparent shadow evaluation, and skipping
the parts that don't affect emission for light evaluation), but I have a
separate point for those in the Principled V2 planning since there's some
other optimization topics as well.
Co-authored-by: Weizhen Huang <weizhen@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/111155
Previously, the Principled BSDF used the Subsurface input to scale the radius.
When it was zero, it used a diffuse closure, otherwise a subsurface closure.
This sort of scaling input makes sense, but it should be specified in distance
units, rather than a 0..1 factor, so this commit changes the unit and renames
the input to Subsurface Scale.
Additionally, it adds support for mixing diffuse and subsurface components.
This is part of e.g. the OpenPBR spec, and the logic behind it is to support
modeling e.g. dirt or paint on top of skin. Before, materials would be either
fully diffuse (radius=0) or fully subsurface.
For typical materials, this mixing factor will be either zero or one
(just like metallic or transmission), but supporting fractional inputs makes
sense for e.g. smooth transitions at boundaries.
Another change is that there is no separate Subsurface Color anymore - before,
this was mixed with the Base Color using the Subsurface input as the factor,
but this was not really useful since that input was generally very small.
And finally, the handling of how the path enters the material for random walk
subsurface scattering is changed. Before, this always used lambertian (diffuse)
transmission, but this caused some problems, like overly white edges.
Instead, two different methods are now used, depending on the selected mode.
In Fixed Radius mode, the code assumes a simple medium boundary, and performs
refraction into the material using the main Roughness and IOR inputs.
Meanwhile, when not using Fixed Radius, the code assumes a more complex
boundary (as typically found on organic materials, e.g. skin), so the entry
bounce has a 50/50 chance of being either diffuse transmission or refraction
using the separate Subsurface IOR input and a fixed roughness of 1.
Credit for this method goes to Christophe Hery.
Pull Request: https://projects.blender.org/blender/blender/pulls/110989
- Adds tint control, which simulates volumetric absorption inside the coating.
This results in angle-dependent saturation and affects all underlying layers
(diffuse, subsurface, metallic, transmission). It provides a physically-based
alternative to ad-hoc effects such as tinted specular highlights.
- Renames the component from "Clearcoat" to "Coat", since it's no longer
necessarily clear now. This matches naming in e.g. other renderers or OpenPBR.
- Adds an explicit Coat IOR input, in preparation for future smarter IOR logic
around the interaction between Coat and main IOR. This used to be hardcoded
to 1.5.
- Removes hardcoded 0.25 weight multiplier, and adds versioning code to update
existing files accordingly. OBJ import/export still applies the factor.
- Replaces the GTR1 microfacet component with regular GGX. This removes a corner
case in the Microfacet code, solves #53038, and makes us more consistent with
other standard surface shaders. The original Disney BSDF used GTR1, but it
doesn't appear that it caught on in the industry.
Co-authored-by: Weizhen Huang <weizhen@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/110993
Implements the paper [A Microfacet-based Hair Scattering
Model](https://onlinelibrary.wiley.com/doi/full/10.1111/cgf.14588) by
Weizhen Huang, Matthias B. Hullin and Johannes Hanika.
### Features:
- This is a far-field model, as opposed to the previous near-field
Principled Hair BSDF model. The hair is expected to be less noisy, but
lower roughness values takes longer to render due to numerical
integration along the hair width. The hair also appears to be flat when
viewed up-close.
- The longitudinal width of the scattering lobe differs along the
azimuth, providing a higher contrast compared to the evenly spread
scattering in the near-field Principled Hair BSDF model. For a more
detailed comparison, please refer to the original paper.
- Supports elliptical cross-sections, adding more realism as human hairs
are usually elliptical. The orientation of the cross-section is aligned
with the curve normal, which can be adjusted using geometry nodes.
Default is minimal twist. During sampling, light rays that hit outside
the hair width will continue propogating as if the material is
transparent.
- There is non-physical modulation factors for the first three
lobes (Reflection, Transmission, Secondary Reflection).
### Missing:
- A good default for cross-section orientation. There was an
attempt (9039f76928) to default the orientation to align with the curve
normal in the mathematical sense, but the stability (when animated) is
unclear and it would be a hassle to generalise to all curve types. After
the model is in main, we could experiment with the geometry nodes team
to see what works the best as a default.
Co-authored-by: Lukas Stockner <lukas.stockner@freenet.de>
Pull Request: https://projects.blender.org/blender/blender/pulls/105600
