PaintMaskFloodMode is supposed to be an alias
of eSelectOp. paint_intern.h now includes
ED_select_utils.h and simply assigns the
relevent members of eSelectOp to PaintMaskFloodMode's
members.
If compositing uses renderlayers, and a camera was missing in the
associated scenes, the error message also referred to the scene the comp
tree was in (not the scene of the renderlayer -- which can potentionally
be different).
This was confusing and is now rectified.
Maniphest Tasks: T102514
Differential Revision: https://developer.blender.org/D16542
Always position the nodes added with the node search at the point where
the search operator was invoked by ensuring the operator context is the
main node editor region.
This was an unintended change of rBbdb57541475f, caused by the operator
now getting the cursor position in region space. So when the operator
was called from the menu, it would get the cursor position in the
region space of the menu, which lead to an offset when adding the node
since it expected the coordinates to be in the space of the node editor.
Setting the correct operator context also fixes inconsistent transform
sensitivity depending on zoom when adding nodes via the search in the
menu which has been an issue since as far back as Blender 2.79.
Also includes a small fix for the vertical offset of nodes added by the
search which varied depending on the UI scale. Same fix as in
rB998ffcbf096e.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16555
Add a new flag value `CUMA_REMOVE` to explicitly tag duplicate points
for removal. This prevents a bug where all curve points with vector
handles were deleted, when removing duplicate curve points while
updating the widget. This happened, because the flag value used to tag
points for removal was the same as the value of `CUMA_HANDLE_VECTOR`
used to store the handle type of the curve point.
Reviewed By: Hans Goudey
Differential Revision: http://developer.blender.org/D16463
The 1a1341c387 made it so that when ID's path changes the ID is
tagged for the source re-evaluation. Another factor here is that
there is a code in the read file which replaces alternative path
slash with the native one.
Typically it is not a problem since IDs are re-evaluated on load,
but the movie clip has the special handling on load to calculate
the image sequence length and initialize principal point.
This change makes it so that the principal point is only reset
when the clip resolution changes. This is something which is
also useful for cases when a non-centered primncipal point is
used and someone accidentally clicks on the clip reload button.
It is not really ideal but covers most of the common cases.
Ideally the principal point will be stored in relative or
normalized space.
The remaining part is that there is now extra image sequence
length calculation after file load. This needs more careful
look.
The launcher is designed to exit as soon as possible
so there's no useless processes idling. Now when steam
launches blender with the launcher, this breaks the
time tracking steam has as the thing it just started
exits within milliseconds.
There already is some code in the launcher that makes
the launcher linger to support background mode. This
patch extends this a bit to also wait if the parent
process is steam.exe
Reviewed by: brecht lichtwerk dingto
Differential Revision: https://developer.blender.org/D16527
This code mainly tags IDs with `ID_RECALC_SOURCE` when one of their file
paths is modified by `BKE_bpath_foreach_path_id`.
In addition, a check is added to `BKE_sound_evaluate` to call similar
code as when `ID_RECALC_AUDIO` is used.
Finally, Sergey added some changes to relations buildings between
components for Sound IDs in the depsgraph, linking `PARAMETER` to
`AUDIO`.
Maniphest Tasks: T101326
Differential Revision: https://developer.blender.org/D16528
Imgaes which are render results and the like should not be considered as
unused, even if they do not have actual users.
NOTE: this does not apply to 'regular' images, which should be purged by
the recursive purge code, even if they are currently shown in an Image
Editor (this is not actual data usage).
The `animdata_filter_mask()` was not respecting the filter flag of
`ANIMFILTER_FCURVESONLY` which lead to cases when animation system
element is effectively cast from `MaskLayer*` to `FCurve*`.
The proposed solution more closely follows the GreasePencil filtering
makes it so when `ANIMFILTER_FCURVESONLY` flag is uses no mask layer
channels will be added.
Differential Revision: https://developer.blender.org/D16498
If the edge you are going to slide along is very close to in line
with the adjacent beveled edge, then there will be sharp overshoots.
There is an epsilon comparison to just abandon loop slide if this
situation is happening. That epsilon used to be 0.25 radians, but
bug T86768 complained that that value was too high, so it was changed
to .0001 radians (5 millidegrees). Now this current bug shows that
that was too aggressively small, so this change ups it by a factor
of 10, to .001 radians (5 centidegrees). All previous bug reports
remained fixed.
I18n: make a few messages translatable
* Missing Paths * in the Presets menu when no preset exists yet.
The White Noise entry in the Add Node menu is the only one lacking a "Texture" suffix, which doesn't seem justified since the node itself is already called "White Noise Texture". Rename the entry its name can be extracted and used for the node--and for consistency.
New object material node names (Principled BSDF, Material Output) come from a preset node tree. The nodes' names need to be translated after creation.
Extract the "Fallback Tool" pie menu title.
Translate grease pencil options in the viewport overlay menu.
Ref T102030.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16345
The default name when saving a screen capture in an unsaved .blend
file is "screen.<ext>". This can be translated.
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D16486
Also, single point cyclic Catmull Rom curves aren't evaluated properly.
Cyclic is meant to make no difference in that case. Now they correctly
evaluate to a single point.
After rB716ea1547989 the UV overlay is no longer displayed in
the UV Editor. It only appears for the Image Editor.
So restore the previous behavior, displaying the "UV shadow"
overlay in the UV editor as well.
Reviewed By: Jeroen Bakker, Germano Cavalcante
Maniphest Tasks: T92614, T100926
Differential Revision: https://developer.blender.org/D16490
When dragging out a boolean noodle, releasing and choosing
'switch > Switch' from the search popup, the code would mistakenly
search for 'Start' instead of 'Switch'.
Also the function called was not exactly the right one, leading to the
node being marked as invalid.
Reviewed By: Jacques Lucke
Differential Revision: https://developer.blender.org/D16512
Mask from cavity can now pull settings from three
places: the operator properties, scene tool settings
or the brush. This is needed to make the "create mask"
button work as expected.
Previously these were only written to the console with no UI feedback
whatsoever. Just a bit nicer to give the user some info that something
went wrong.
See also T102495.
Differential Revision: https://developer.blender.org/D15732
The main problem is that the node tree was not properly updated
after a property in the tree changed. More specifically, the collection
pointer in the Collection Info node was cleared, but the node tree
was not updated after that (usually this is handled by rna updates).
Differential Revision: https://developer.blender.org/D16289
- The label for modal keymaps was extracted but did not use the proper
context on translation.
- Same goes for modal keymap items.
- Extract the UI messages from rna_keymap_ui.py
- Translate global keymap names.
- Use the proper context in the status bar for the tool prompt operator
Ref T102071
Maniphest Tasks: T102071
Differential Revision: https://developer.blender.org/D16348
Regression introduced by {rB601995c3b86986cf8f8e5b6e5a65bcfa7f8f2e32}.
Noticed by Heist project as they render final frames with workarounds enabled.
The mentioned patch introduces attaching VBO as textures. This used to be
done by the caller. The mechanism used a different order hence the VBO
could still be unbound when using. This cannot be solved inside the new
mechanism clearly so this patch will just bind when the buffer isn't bound
just before the drawing command is sent to the GPU driver.
Adjusts behavior for trimming Bezier curves, specifically the outer
Bezier handles for the endpoints which do not influence the actual
curve. Handles are only adjusted if they lie within the same segment
with at most one endpoint being a control point (unless they are the
same in which handles are set to the point itself). The result yields
a curve in which the trim result can be inverted by re-setting the
cyclic property for the curve using 'Set Spline Cyclic' node
(iff both trim endpoints lie within a segment).
Differential Revision: https://developer.blender.org/D16488
Patch fixes versioning issue with NURBS files saved with Blender
version from commit 45d038181a to 0602852860 and opened with
Blender version from commit 0602852860. Cyclic Bezier NURBS
saved and then opened with Blender versions mentioned above
changed their shape.
Bug was reported in comments of T101160, circle problem.
Differential Revision: https://developer.blender.org/D16503
The weird code dealing with `MeshPrimitive` didn't increment the
material indices pointer for geometry types besides triangle fans.
Also use a proper accessor to avoid adding a duplicate material
indices attribute, just in case this code is used on existing meshes.
Selection range is +/-7 pixels to actual clicked position, but strip selection
was biased towards rightmost strip.
To make selection more intuitive, select closest strip to clicked position, and
stop iterating when strip intersects clicked pixel.
Reviewed By: sybren
Differential Revision: https://developer.blender.org/D15728
To override the default quality and filepath. After changes to unify the image
operator and this method, the quality changed from 75 to 90 to make both
consistent. However there was no way to lower the quality to match the previous
behavior, this adds support for that.
Ref T102421
The anims data is a runtime cache similar to the image buffer or GPU texture
and needs to be preserved through undo in the same way.
Found as part of D15042 development.
Ensure each graph material_function only evaluates the input links that are connected to it.
Differential Revision: https://developer.blender.org/D16425
rBa8f7d41d3898 added a "duplicate" check for being in curves sculptmode
unnecessarily afaict (`in_sculpt_curve_mode` in addition to the
previously existing `in_curves_sculpt_mode`).
Over time, the later evolved to also take into account the output of a
viewer node, see rBc55d38f00b8c (the previously existing
`in_curves_sculpt_mode` did not receive this).
This all results in the fact that selection is not drawn with a viewer
node (can be useful though, and there are separate opacity controls for
both selection and the viewer attribute, so these can be used/blended to
everyones liking).
So now deduplicate the check.
Differential Revision: https://developer.blender.org/D16467
This test is disabled for the following reasons:
This test is one of the longer ones in this suite (2979 out of 3559ms total)
and nothing is currently monitoring the performance, if this test were to be
20% slower one day, no-one would actually notice.
there are no asserts, the test actually cannot fail.
it's good to have some benchmark code, so like some of the other mesh
benchmark code, exclude it using an `#ifdef` guard so i can be easily
re-enabled when needed.
reviewed by: jbakker
Differential Revision: https://developer.blender.org/D16314
The "visibility_instances.blend" cycles test was failing..
The stack of dupli generator types added in e508de0417
wasn't "popped" correctly after recursive duplis were generated.
Show RGB value "1.000" instead of "1", jus like HSV mode. Also uses full labels
"Red", "Green" and "Blue" rather than the shortened labels "R", "G" and "B",
for both RGB and HSV.
Differential Revision: https://developer.blender.org/D14387
Previously the `CustomData_add_layer` function always returned
the existing layer data when used for types that can only have one
layer. This made it work like an "ensure layer exists" function for those
types. That was used in various places to make code more concise.
0a7308a0f1 changed that to always "recreate" the layer even
when it existed. Maybe this is more logical for an "add layer" function,
but that's not clear, and it breaks a bunch of existing code that relied
on the current behavior. Rather than spending a bunch of time going
through uses of the CustomData API, this patch resets the behavior
to what it was before, but adds an assert and a comment to help
avoid memory leaks and other issues. We should focus on moving
to the attribute API instead.
Differential Revision: https://developer.blender.org/D16458
Code in `deg_object_hide_original` uses the dupli object type to decide
whether to hide the original object. The geometry component system
changed the dupli object generator types, which made this not work.
To maintain existing behavior, maintain a stack of non-geometry-nodes
generator types while building the dupli list, and assign that to the
dupli object instead.
I think this code is on its last legs. It can't handle too many more
hacky fixes like this, and should be replaced soon. Hopefully that is
possible by using a `bke::Instances` type instead. However, this
bug is bad enough that it's worth fixing like this.
Differential Revisions: https://developer.blender.org/D16460
