Recoded the Transform code for NLA-Strips so that they can now be moved between strips and will not get truncated when they get moved into other non-moving strips.
Todos:
* The current code for moving strips between tracks is buggy (only goes up, and has a tendency to move up without being told to)
* Auto-snapping doesn't work yet...
* Chains of selected strips are now converted to meta-strips before transforms begin, and converted back afterwards. This simplifies the transform code needed in later stages...
* Transform-flushing code for Meta-Strips should now work. There seems to be a little bit of numeric inaccuracy problems somewhere, as two strips which met at the same frame can get separated when scaling.
* Meta-strips now draw with proper text identification
* Snapping strips now properly clears meta-strips if a moved strip needs to be moved into a new track to be accomodated.
* Fixed a filter used by a selection-operator.
* Split strip (YKEY) now plays nicely with Transitions and Metas. Meta strips get split up into their child strips, while transitions are ignored.
* Wrapped Meta_Strip->strips in RNA
* Bugfixes in Meta-strip API functions to silence some runtime-errors...
* Added several API functions for Meta-Strips editing. One of these (flush transform) still needs a few tweaks before it does its job well enough for all cases.
* Meta strips are now drawn with a purple-ish colour. The start/end points of the strips they encompass are shown with lines along the length of the strips, with lines starting from the top indicating start-points and lines starting from the bottom indicating end-points.
* Meta strips can be made (i.e. strips can be assigned to meta-strips) by selecting some strips and pressing Shift-G.
Meta strips can be removed by selecting some meta-strips and pressing Alt-G.
* Strips can now be 'snapped' to start from: the current frame, the nearest frame, the nearest second, or the nearest marker; using the Shift-S hotkey.
'Islands' of adjacent selected strips occurring in the same track are moved together as a single strip so that the start-point of the first strip is on the sepcified time, but all the relative lengths of strips stay the same. Internally, temporary meta-strips are created to facilitate this.
Refactored the backend code/API's to support 'meta' strips (i.e. strips containing other strips). These have been implemented to be nested to 'unlimited' depths (in terms of common usages that is, though there is a very remote chance of stack-overflow in theoretrical evil cases only that shouldn't ever be encountered in production).
This paves the way for implementing the necessary tweaks needed for the transform code (in addition to some cool user-level tricks)
Groups (the Action variety) can now be muted, and also be set to not be drawn in the Graph Editor. These settings get applied to all the F-Curves within the group, overriding any settings individual F-Curves might have, allowing users to quickly mute or hide groups of curves without having to go through clicking on all of them.
Also, added a flag that can be used to set the curve visiblity on AnimData level too. This will be enabled in a future commit.
The 'pin' icon beside the name of the active Action when tweaking some strip's action can be used to toggle between editing the Action's keyframes in 'mapped' time or in 'un-mapped' time.
Now it is possible to load old files and be able to switch layers to show/hide objects AND have that reflected in the Animation Editors which rely on the scene layers being set correctly.
* Made NLA Editing functions more aware of transitions.
- A transition can only be added between a pair of action-clips. Previous, two transitions could be added next to each other, which has undefined behaviour
- Deleting a strip with transition(s) on either side will remove the transitions too. Feedback welcome on this
- The 'type' setting for NLA-Strips is no longer editable. This was dangerous as it could result in transitions with undefined behaviour (though nothing would happen).
* Menus for adding F-Modifiers now only show relevant modifiers (i.e. 'Invalid' is not included in the list, and 'Cycles' doesn't need to be shown for NLA since we've got repeat)
* Function Generator and Noise F-Modifiers now have complete GUI's. A few settings were missed during the porting process.
* F-Modifier buttons now have their source-ID's included in the RNA Pointers used. This didn't get them animateable directly, but is a step closer.
These buttons are found in the Evaluation panel, but are currently disabled as I've yet to add the proper code to ensure that animating these will work correctly. They will hopefully be working before the end of the day.
These now use a hybrid drawing approach - using the layout engine for just layouts, but still mostly using old-style buttons in many places where button callbacks and/or special data-access methods are needed (or where RNA wrapping isn't in place yet).
All kinds of changes to get it ready for UI layouts. This means RNA
and operators should be working correct, but most buttons are still
not actually there yet.
* Added near empty soft body, fluid, field and collision panels,
tweaks to cloth panels.
* Fluid bake works, but without escape or showing any progress.
* Fluid/Softbody/Cloth/Collision can now be both added as modifiers
or in the physics panels.
* Missing: fields & soft body for particles.
* Missing: proper updating softbodies, guess this code still needs
updates after pointcache refactor?
Cleanup of scroller drawing in 2D windows.
Before:
http://download.blender.org/institute/rt11.jpg
After:
http://download.blender.org/institute/rt12.jpg
Will add 'zoom' widget circles later, as mockupped here:
http://www.reynish.com/files/blender25/fcurve_scrollbar.png
Also note the scale values are inside scroller; drawing it
on top conflicts with current frame item and markers.
Currently scroller disappear entirely when view is total.
For Joshua:
To make sliders behave nicely, the boundbox (v2d->tot) has to
be refreshed on each change. I've added it in graph drawing
now, but it could be notifier based I guess... not sure what
the correct anim api call would be. Can discuss tomorrow!
On todo:
Layout config hints so people can make scroller positions swap.
* Most of the F-Modifiers have been ported to use the layout engine + RNA for drawing their buttons now. This plays much nicer with various button-layouts.
--> As a nice demo, try adding a Noise Modifier to a NLA-strip, and change the 'size' setting to about 2 to see some effects.
* Generator and Envelope modifiers haven't been ported yet since they're quite complex (requiring more time + energy), and as such, have been made to have some temporary error prints instead. Will check on this tomorrow.
* Finished/cleaned up the RNA-wrapping of most FModifiers.
TODO's (help requested... Brecht?):
Generator modifier's UI cannot be wrapped yet using the layout engine (though I might try using the old system only), as I'm having some trouble wrapping the coefficients array for this (see rna_fcurve.c - rna_def_fmodifier_generator())
More toolbar functionality for workflow review.
- Split the region in two parts, bottom has the Tool Properties, the
top part shows 2 panels, one for python defined tools, other for a
"tool shelf" which (later) will get saved in files.
- Added a full context driven framework for this toolbar, showing
the tools depending on 3D window 'mode'. Both python defined tools
as the shelf respect this. So - for example - you will see different
tools in editmode mesh, as in vertex paint mode, etc.
- First template for the python tools will be committed after this commit;
it has placeholder tools to just show/test functioning.
NOTE: if you had saved a layout that shows tools region, open/close it
once to get the new region created for properties.
TODO:
- Moving paint properties to tool settings
- Test a layout with horizontal toolbar (without properties)
- Bring back floating panels, and put tool-properties here. (as option)
* Using the Ctrl-Shift-M hotkey, F-Modifiers can be added to all the selected strips.
* F-Modifiers can also be added/tweaked from the NLA N-Key properties. The UI now uses the same code as for the graph editor ones.
The UI drawing here is currently messed up from the NLA side, since it seems combining normal layout stuff and old-style uiBlocks doesn't seem to work too well (BUT! the buttons are at least functional).
Next up, I'll need to recode the buttons panel for the Graph Editor so that all of the drawing can be migrated over to use the new layout engine.
* F-Modifier API is now in its own file in blenkernel
* Renamed and refactored these so that they're no dependent on F-Curves, since all they really used was the fcu->modifiers list
* Added missing license blocks to a few files
* F-Modifier UI drawing/handling is now defined in a separate file so that it will be more suitable for inclusion into the NLA Editor's buttons.
* Started removing F-Curve dependence from the modifier drawing code, which wasn't strictly necessary
* Fixed F-Curve RNA wrapping to correctly use FPoints instead of the bulkier BPoints. Although nobody was likely to have encountered bugs here yet, this would almost certainly have contributed to some segfaults/data corruption along the track.
When auto-keying is enabled, the insertion mode is no-longer blank. The version patching code now takes this into account, but the conversion doesn't work for existing .b25.blend defaults files though.
Started cleaning up FModifiers in preparation for allowing them to be used on NLA Strips.
This commit separates the 'Built-in Function' mode for the Generator modifier out into its own modifier, since it was being quite frequently used (and the RNA wrapping for this used to be quite hackish).
BACKWARDS COMPATABILITY WARNING:
Old files with FModifiers saved (i.e. old 2.5 files, but not any others) will not load correctly as a result of these changes (the wrong modifiers will be shown). I've decided that there are not likely to be many files affected by this yet, but doing this will result in a much nicer modifiers-define list in the long run.
For now, some of these polls may be a bit too restrictive, but at least we have some unified+cleaned bases to work from now (instead of relying on the generic ED_operator_area_active).
RNA
* Added the relevant active_*_index properties, with proper
get/set/range, updates and notifiers.
* Context.tool_settings.
* ToolSettings.vertex_group_weight.
Operators
* MESH_OT_uv_texture_add/remove
* MESH_OT_vertex_color_add/remove
* MESH_OT_sticky_add/remove
* OBJECT_OT_vertex_group_add/remove/assign/remove_from/
select/deselect/copy/copy_to_linked
* OBJECT_OT_shape_key_add/remove
UI
* Some updates and cleanups in list template code.
Known issue: when going in & out of editmode, uv textures and vertex
colors dissappear. I thought me->edit_mesh would be NULL when not in
edit mode but it is not?
RNA_function_call_direct_lookup(C, reports, ptr, "do_something", "sC", "some string value", &RNA_SomeItemType, listbase);
Note that from python you could in theory pass collections of items each of a different type while using this API you can't. I don't think this should be a problem as RNA supports collections this way anyway (i.e. where items are all of the same type or inherit from the same base type).
Also a small fix for pointer parameters.
Added slice to PyRNA collections and arrays (py3 only).
eg.
some_verts = mesh.verts[0:10]
some_rna_array[4:-1] = [0,1,2,3]
Collections dont support assignment, when assigning slices, resizing the array isnt support like with python lists.
* Mesh.add_geometry, Mesh.update and make indices editable. This
is without checking if they are valid still, no time now to
implement this.
* Also fix warnings in rna_ui.c, and a bug in CDDM_calc_edges.
Example code:
co = [0.0, 0.0, 0.0] + [1.0, 0.0, 0.0] + [0.0, 1.0, 0.0] + [1.0, 1.0, 0.0]
faces = [0, 1, 2, 0] + [1, 3, 2, 0]
mesh.add_geometry(4, 0, 2)
mesh.verts.foreach_set("co", co)
mesh.faces.foreach_set("verts", faces)
mesh.update()
== Re-added smooth stroke ==
UI: toggle is just in the sculpt menu for now. Also changes the sculpt paint cursor slightly, draws a line between previous and current locations.
It's a different implementation than in 2.4, works like this:
The stroke interpolates between the last mouse location and the current location, weighted towards the previous location. If the stroke gets within a certain radius of the current mouse location, the stroke stops. This radius allows for sharp turns in the stroke.
Todo: there are two hard-coded parameters that should become user settable, that's the weighting between previous and current locations, and most important, the no-update radius.
Note also that this option was added as a per-brush flag, worth discussing whether that's the correct place, or whether it should be a sculpt setting like symmetry?
== Improved stroke spacing ==
The previous implementation of stroke spacing simply guaranteed that stroke dots would not occur any closer than the space setting. It now forces stroke dots to always be the specified distance apart.
Todo: Performance gets pretty awful with a small spacing setting, this needs optimization.
* show only name of the last directory for the bookmark
* small fix of projectfile: header BLI_fileops.h was moved
Note: full path should appear in tool tip later, also for renaming bookmarks later on.
Image Window
* Unpack operator now works.
* Some small layout code tweaks.
Info Window Header
* Moved to python UI code.
* template_running_jobs, template_operator_search added.
* Ported external data operators: pack/unpack all, make
paths relative/absolute, find/report missing files.
Also
* Report RPT_INFO too, not only warnings and errors.
* Run UI handle functions after RNA and Operators.
* Rename particle system add/remove operators, to not
include "slot", that's only there for materials because
that's what they are called now in RNA.
coords = array.array('f', [0.0]) * len(me.verts) * 3
m.verts.foreach_get('co', coords)
the reverse works with set also.
currently works for python buffers or sequences (slower)
Quick speed test with 1,179,654 verts.
*foreach_get*
list 0.377
array 0.032
py 10.29
*foreach_set*
list 0.184
array 0.028
py 9.79
where python was done like this...
----
i= 0
for v in m.verts:
co = v.co
l[i] = co[0]; l[i+1] = co[0]; l[i+2] = co[0]
i+=3
----
some of the error checking here needs to be cleaned up to account for different invalid bad inputs.
Mathutils support for subclassing Vector, Quat, Euler and Matrix types.
Removed C docstrings, prefer to make sure our epydocs are well maintained rather then duplicate, vague doc strings.
Will convert scripts to detect missing docs from the BGE.
* bookmark operators: add and delete bookmark
* first start at menus in file browser: Directory and Bookmarks
* Adding a bookmark via menu or via CTRL+B
* Remove a bookmark with the X button next to it.
* start of filebrowser RNA
* system files, bookmarks, etc. now nicely inside panels to allow collapsing etc.
* filebrowser header now defined in space_filebrowser.py
TODO:
* button type for bookmarks etc. not final yet, at least should get centered still. Suggestions welcome here.
Implementation of RNA side of foreach_get/foreach_set,
Campbell will do python code.
Three functions for efficiently setting some property for all
items in a collection. RNA_property_collection_raw_array gives
access to the properties as an array with length, stride, and
type specified, if this is possible, i.e. not when it uses a
ListBase, or if a manual get/set function is implemented.
Two other functions take a C array pointer and get/set it
using the a collection + property name, using efficient array
access if possible, and otherwise using slower RNA iterator.
RNA_property_collection_raw_get
RNA_property_collection_raw_set
The number of type conversion required here got a bit out of
hand, it could be more efficient still if checking for more
cases, but function is already long enough.
Example: http://www.pasteall.org/6362/c
