Use a Vector<std::string> , instead of a Set<std::string> as a Set does
not keep the same order when iterating over it.
Differential Revision: https://developer.blender.org/D17103
In many cases when reading undo memfile, n the 'restore id from old
main' part of the process, the 'id_old' is not set, which means that
the call to `BKE_main_idmap_insert_id` would try to dereference a `nullptr`.
In practice this is likely not an issue (see comment in code for details),
but at least explicitely check for a nullptr `id_old` pointer.
Would deffer actual cleanup of this area for after 3.5 is branched out.
Currently only affects 'UI' IDs (WindowManager, Screen, etc.), but in
the future other types may be affected as well.
NOTE: this is only used in readfile code itself, not in the
post-processing performed by `setup_app_data`, as this code is too
specific for such generic handling.
Simon mentioned that this gets in the way more than it helps. No geometry
sockets currently show up in the modifier panel. People may build node groups
that have multiple geometry inputs that can be used when the group is used
as node instead of as modifier.
In the future we could also allow e.g. choosing an object to pass into a geometry
socket. That has the problem that we'd also have to duplicate other functionality
of the Object Info node (original vs. relative space).
There were two issues:
* The `new_point_counts_per_curve` was one too large, resulting in
`interpolate_from_neighbors` reading invalid memory.
* Writing the counts into the existing offsets array didn't quite work
because there can be a collision at the offset right between the
last old curve and the first new point. There was a race condition
where this value could be read and written at the same time.
When some path property was displayed in the File Browser, clicking the
icon to open a file browser dialog to choose a file/directory would
show an error. While this makes sense when you are already in a file
browser dialog (we don't support such nested file browser dialogs),
allow it when the file browser is opened as a normal editor, not as a
dialog.
Current implementation had some faulty assumtions and had some work
arounds for crashes that were actually limitation of the implementation.
The main reason for this was that the implementation didn't add new
primitives in the same direction it was already adding. Some when
incorrect behavior was detected it was assumed that the part wasn't
manifold (anymore) and didn't fix that part of the mesh.
The new implementation will extract a solution and use this solution
also as the order to generate primitives in uv space.
This patch fixes several crashes and improves the overall quality
when fixing seam bleeding. It also adds additional debug tools
(print_debug) implementation in order to find issues faster in the
future.
Regression in [0] caused by a change where path joining would
replace a forward slash with a back-slash when joining paths WIN32.
Now the directory is always used as a prefix for the paths returned
by BLI_filelist_dir_contents which resolves the regression.
[0]: 9f6a045e23
`remember_deformed_curve_positions_if_necessary` has to be called before
topology changing operations on curves. Otherwise the crazy-space data
is invalid.
The help circles to fill areas were rotated with the object rotation,
but as the stroke is part of the object, apply the rot matrix again
produced a double rotation, so it can be removed.
Two properties are now exposed in python API :
time of each point, and inittime of each stroke.
Reviewed by: Antonio Vazquez
Differential Revision: https://developer.blender.org/D17104
Only one point should be used to create a reference rotation for other
points to follow. Using two caused the resulting twist to be
asymmetric, especially noticeable on symmetrical, cyclic curves.
Alternate fix to D11886 which caused T101843.
After object-mode undo (memfile undo), the value wan't lost, but the
property would be temporarily converted back to integer type in order
to be forward compatible. Now only use the forward compatible
writing when writing undo steps. Auto-saves and similar files are
currently not forward compatible anyway.
Make the functions more flexible and more generic by changing the curves
arguments to the curve offsets. This way, theoretically they could become
normal utility functions in the future. Also do a consistency pass over
the algorithms that generate new curves geometry for naming and
code ordering, and use of utility functions. The functions are really
quite similar, and it's much easier to tell this way.
The most time-consuming operation in merge by distance is to find
duplicate faces (faces that are different but have the same vertices).
Therefore, some strategies were planned to optimize this algorithm:
- Store the corner indices in an array thus avoiding multiple calls of `weld_iter_loop_of_poly_next`;
- Create a map of polygons linked to edges instead of linked to vertices - this decreases the number of connections and reduces the calculation of the intersection of polygon indices.
There are other fields to optimize, like reusing the `wpolys` array
instead of creating a new array of corner offsets. And join some arrays
as members of the same struct to be used in the same buffer.
But for now, it is already a nice optimization. And the new
`poly_find_doubles` function can be reused in the future to create a
generic utility.
The result of the optimization varies greatly depending on the number
of polygons, the size of each polygon and the number of duplicates.
On average it was something around 2 times faster.
Worst case tested (old vs new): 0.1ms vs 0.3ms
Best case tested (old vs new): 10.0ms vs 3.2ms
Differential Revision: https://developer.blender.org/D17071
`PBVH_Leaf` nodes are now split into a new `PBVH_TexLeaf`
node type when using the paint brush. These nodes are
split by image pixels, not triangles. This greatly
increases performance when working with large
textures on low-poly meshes.
Reviewed By: Jeroen Bakker
Differential Revision: https://developer.blender.org/D14900
Ref: D14900
The problem was that the stroke array was not reset for
each iteration of the loop, so the second time around,
the array was not initialized correctly and
was left with a NaN value.
The USD Preview Surface material import feature is now considered
stable, so this patch removes this option from the Experimental
category in the UI.
The Import USD Preview option is now enabled by default.
The Experimental box has been removed.
A new Materials box has been added to group the Import
USD Preview Surface, Set Material Blend and Material
Collision Mode options.
Reviewed by: Sybren
Differential Revision: https://developer.blender.org/D17053
Rewrite of the Workbench engine using C++ and the new Draw Manager API.
The new engine can be enabled in Blender `Preferences > Experimental > Workbench Next`.
After that, the engine can be selected in `Properties > Scene > Render Engine`.
When `Workbench Next` is the active engine, it also handles the `Solid` viewport mode rendering.
The rewrite aims to be functionally equivalent to the current Workbench engine, but it also includes some small fixes/tweaks:
- `In Front` rendered objects now work correctly with DoF and Shadows.
- The `Sampling > Viewport` setting is actually used when the viewport is in `Render Mode`.
- In `Texture` mode, textured materials also use the material properties. (Previously, only non textured materials would)
To do:
- Sculpt PBVH.
- Volume rendering.
- Hair rendering.
- Use the "no_geom" shader versions for shadow rendering.
- Decide the final API for custom visibility culling (Needed for shadows).
- Profile/optimize.
Known Issues:
- Matcaps are not loaded until they’re shown elsewhere. (e.g. when opening the `Viewort Shading` UI)
- Outlines are drawn between different materials of the same object. (Each material submesh has its own object handle)
Reviewed By: fclem
Maniphest Tasks: T101619
Differential Revision: https://developer.blender.org/D16826
Improve handling for cases where maximum in-flight command buffer count is exceeded. This can occur during light-baking operations. Ensures the application handles this gracefully and also improves workload pipelining by situationally stalling until GPU work has completed, if too much work is queued up.
This may have a tangible benefit for T103742 by ensuring Blender does not queue up too much GPU work.
Authored by Apple: Michael Parkin-White
Ref T96261
Ref T103742
Depends on D17018
Reviewed By: fclem
Maniphest Tasks: T103742, T96261
Differential Revision: https://developer.blender.org/D17019
Required by Metal backend to have correct usage flags for textures which are read by host.
Authored by Apple: Michael Parkin-White
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T96261
Differential Revision: https://developer.blender.org/D17020
Affecting render output preview when tone mapping is used, and EEVEE scenes such as Mr Elephant rendering in pink due to missing shaders.
Authored by Apple: Michael Parkin-White
Ref T103635
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T103635, T96261
Differential Revision: https://developer.blender.org/D16923
AMD GPUs do not appear to produce consistent results with other GPUs when using textureGather in the Metal backend. Disabling for now to ensure correct function of outline rendering.
This may require an additional sub-pixel offset in the texture sampling calls, to achieve correct behaviour.
Authored by Apple: Michael Parkin-White
Ref T103412
Ref T96261
Reviewed By: fclem
Maniphest Tasks: T103412, T96261
Differential Revision: https://developer.blender.org/D16934
This patch fixes an issue where Blender 3.5 alpha with the Metal GPU backend enabled on Japanese macOS fails to compile shaders and crashes on startup.
In a Japanese environment, `defaultCStringEncoding` is the legacy MacJapanese encoding, and it erroneously converts backslashes (0x5c) to Yen symbols (¥).
Therefore, Metal shader compile fails with the following log and Blender crashes.
```
2022-12-29 13:50:10.200 Blender[13404:246707] Compile Error - Metal Shader Library (Stage: 0), error Error Domain=MTLLibraryErrorDomain Code=3 "program_source:225:74: error: non-ASCII characters are not allowed outside of literals and identifiers
template<typename T, access A = access::sample> struct STRUCT_NAME { ¥
^
program_source:226:14: error: no template named 'TEX_TYPE'
thread TEX_TYPE<T, A> *texture; ¥
^
program_source:226:39: error: non-ASCII characters are not allowed outside of literals and identifiers
thread TEX_TYPE<T, A> *texture; ¥
^
program_source:227:29: error: non-ASCII characters are not allowed outside of literals and identifiers
thread sampler *samp; ¥
^
...
```
We can use `stringWithUTF8String` instead.
Reviewed By: fclem, MichaelPW
Differential Revision: https://developer.blender.org/D16881
In the new Draw Manager, when the same DrawGroup has both front and back facing instances, the front facing instances don't offset their indices accordingly.
Differential Revision: https://developer.blender.org/D17069
