This patch adds list colors to the light theme for the spreadsheet,
which are needed for the data set region. Addresses T92492.
Differential Revision: https://developer.blender.org/D13090
When Constructing bezier splines from dna, the positions of the
left/right handles were set directly in the internal vectors, by
requesting a reference to them. The problem is that
BezierSpline::handle_positions_left() calls ensure_auto_handles()
before returning the reference. That function does some calculations on
uninitialized memory if the positions array is not yet filled.
Differential Revision: https://developer.blender.org/D13107
The issue was caused by splitting happening twice.
Fixed by checking for split flag which is assigned to the both states
during split.
The tricky part was to write catcher data at the moment of split: the
transparency and shadow catcher sample count is to be accumulated at
that point. Now it is happening in the `intersect_closest` kernel.
The downside is that render buffer is to be passed to the kernel, but
the benefit is that extra split bounce check is not needed now.
Had to move the passes write to shadow catcher header, since include
of `film/passes.h` causes all the fun of requirement to have BSDF
data structures available.
Differential Revision: https://developer.blender.org/D13177
rB60fee69682ac39 only partially fixed the issue, `BlendFileReadReport
bf_reports` was now properly stored in `BPy_Library` `self` for the
lifetime of the context, but its `reports` member was still referencing
local variable to `bpy_lib_enter` function.
Apply a local-workaround instead of adding support for this use-case
since pre-selection isn't the intended purpose of gizmos.
This also resolves a glitch where poly-build and loop cut would
briefly show loop-cut or poly-build pre-selection after transforming.
See gizmo_preselect_poll_for_draw note for more details.
rBc473b2ce8bdbf8fa42 improved the situation somewhat, but
attribute search still crashes during animation playback, because
the UI search data references stale memory. The proper solution
is to allow the search to own data rather than just referencing it,
but I would prefer not to do that for 3.0. In the meantime, just
disable attribute search when animation is playing.
Differential Revision: https://developer.blender.org/D13179
This is due to a driver bug, so disable it for now until it gets resolved
in a future driver release.
Ref T92972
Differential Revision: https://developer.blender.org/D13167
It's unclear why this fails. Maybe the size of half4 is not the expected
8 bytes and adjacent pixels are overwritten. Or there is some bug in the
HIP compiler writing a struct into global memory, which we probably don't
do elsewhere in the kernel.
Thanks to Thomas, William and Jeroen for helping investigate this.
This commit adds modifier error messages to some of the cases
where the node group is configured improperly. It also clears the
geometry set when there is an error with the node group. This is
consistent to what we do in nodes themselves, and feels more
intuitive than passing the input geometry through the node group
silently.
Fixes T87142
This function was renamed in rB2bb9a465e6c0e1ca765, but it looks like
that commit missed changing the corresponding translation regular
expression.
Differential Revision: https://developer.blender.org/D13171
When clearing geometry the runtime mutexes of a mesh were freed. This
resulted in crashes afterwards. The clear geometry is an RNA function so
would only effect when using from scripts.
This patch separates init/freeing of the mutexes from other code so they
can be used when needed.
Reviewed By: mont29
Maniphest Tasks: T91518
Differential Revision: https://developer.blender.org/D13142
The issue was that the `object_is_geometry` method was used in two different
contexts that expected the function to behave differently. So a recent change
that fixed `object_is_geometry` for one context, broke it for the other context.
The two contexts are:
* Check if a "real" object can contain a geometry to check if it has to be tagged
for sync after an update.
* Check if an object/instance actually is a geometry that cycles can work with.
I created a new `object_can_have_geometry` method for the first use case, instead
of trying to adapt the existing object_is_geometry method to serve both uses.
Additionally, I changed it so that a BObjectInfo is passed into `object_is_geometry`
to make it more explicit when this method is supposed to be used.
Differential Revision: https://developer.blender.org/D13135
First this was wrong for files written in 2.93 read into blender in 3.0
after the CyclesX merge.
Then this was fixed by versioning in rB6321dd3d4007.
But this caused files written in 3.0 to have this versioning applied as
well (leading to socket shifting).
Now only do the versioning for files created before the CyclesX
merge.
Maniphest Tasks: T92979
Differential Revision: https://developer.blender.org/D13173
rBaa13c4b386b13111 added a check for the active object
in drawing code, but it missed adding a check for the active
base before trying to retrieve its object.
The test script did not work on windows
since it had some trouble importing the
api module on the blender side of things.
turning the file path to the module into
a raw string literal sidesteps the
backslash issue in the path.
Differential Revision: https://developer.blender.org/D13163
Reviewed by: brecht
Currently we have a fixed instance recursion limit. While we want to lift this
limitation at some point, that is out of scope for a bug fix. For now just print
a warning to make it easier to detect the issue.
Differential Revision: https://developer.blender.org/D13162
Because the menus list several gizmo visibility settings it makes grammatical sense that the panel name is plural.
This also matches the "Overlays" menu.
With instancing becoming more common with geometry nodes,
instances are less of a separate thing and more of an essential part
of evaluated data. Displaying them with a separate outline, while
helpful in some cases, is not worth the lack of visibility or confusion
about selected/active status. Information about the performance
of the scene due to instancing is always available with the statistics
like vertex count, etc.
The problems were compounded by the fact that the instancing
system is used to output geometry components that don't correspond
to the object's original type. So this patch also fixes that problem.
Fixes T92079, T81010
Ref T91310
Differential Revision: https://developer.blender.org/D13133
Decorators were only added for the first item of an array.
Decorators for all items of an array are added:
- if the layout is flagged `UI_ITEM_PROP_DECORATE` automatically in
`uiItemFullR` or
- calling `uiItemDecoratorR` (but only in certain situations, see below)
When calling `uiItemDecoratorR` with an index of 0, the following
happens:
- the index is passed to `uiItemDecoratorR_prop`
- that checks with `ui_item_rna_is_expand` if decorators should be added
to all items of an array
- the check fails (because it only permits RNA_NO_INDEX -- which is -1)
So two things we can do:
- remain using `uiItemDecoratorR` (that would require to pass an index
of RNA_NO_INDEX -- a bad level include -- or -1
- just use `uiLayoutSetPropDecorate` to flag the row properly
This patch does later.
Differential Revision: https://developer.blender.org/D13159
Currently the Distribute Points on Faces node does not propagate
non-point attributes correctly. That is because it first interpolates the
attributes to the point domain on the input mesh, and then propagates them.
Differential Revision: https://developer.blender.org/D13148
Since the recent change to context paths to use the arrow icon instead of the triangle (D13106),
the `SMALL_TRI_RIGHT_VEC`is no longer used. This patch removes the icon and all references.
- Replace `SMALL_TRI_RIGHT_VEC` with `RIGHTARROW` in Freestyle UI
- Remove references to `SMALL_TRI_RIGHT_VEC` and `ICON_SMALL_TRI_RIGHT_VEC`.
Fix for built-in add-ons has been done in rBAcc2f71bfe9b0/rBAa84028f8a89a.
This will be added to the list of breaking changes [[ https://wiki.blender.org/wiki/Reference/Release_Notes/3.0/Python_API#Breaking_Changes | in the Wiki ]].
Reviewed By: Severin
Differential Revision: https://developer.blender.org/D13130
Nishita sky is not available in Eevee, display a warning to make this clear inside the Sky texture node.
Differential Revision: https://developer.blender.org/D13161
Adds a pass before denoising that calculates the intensity of the image, which can be
passed into the OptiX denoiser for more optimal results for very dark or very bright images.
In addition this also fixes a crash that sometimes occurred on exit. The OptiX denoiser object
has to be destroyed before the OptiX device context object (since it references that). But in
C++ the destructor function of a class is called before its fields are destructed, so
"~OptiXDevice" was always called before "OptiXDevice::~Denoiser" and therefore
"optixDeviceContextDestroy" was called before "optixDenoiserDestroy", hence the crash.
Differential Revision: https://developer.blender.org/D13160
Adds a workaround for a driver bug in r495 that causes artifacts with OptiX denoising.
`optixDenoiserSetup` is not working properly there when called with a stream other than the
default stream, so use the default stream for now and force synchronization across the entire
context afterwards to ensure the other stream Cycles uses to enqueue the actual denoising
command cannot execute before the denoising setup has finished.
Maniphest Tasks: T92472
Differential Revision: https://developer.blender.org/D13158
WITH_OPENCOLORIO and WITH_COMPOSITOR are required to run the tests at all,
since they affect many tests.
WITH_OPENSUBDIV WITH_FREESTYLE, WITH_OPENVDB, WITH_OPENIMAGEDENOISE and
WITH_MOD_FLUID selectively disable some tests.
When adding certain customdata layers (namely UVs, vertex colors and
sculpt vertex colors), the user does not get notified the specific limit
has been hit (blender just silently does nothing).
Now inform the user [decided to not do this in poll() since it could get
messy once operators are extended to operate on all selected objects, so
left this as a visible error in execute() -- or from python].
Maniphest Tasks: T92318
Differential Revision: https://developer.blender.org/D13147
New tracking-camera presets d486ee2dbd used wrong code because I
copied them from the camera-presets. Now they set the right properties
again, the values stay the same as before.
Differential Revision: https://developer.blender.org/D13139
Expose transform tools when in weight paint mode with pose-mode enabled,
displaying transform tools in the toolbar, as is already done in
object & pose mode.
These are only shown when weight-paint + pose mode are active at once.
This allows single key-strokes to activate tools, needed when
tool-access is set as the default action for G/R/S key bindings.
Reviewed By: JulienKaspar
Ref D13028
If the blend file is saved from a script in another thread,
like the render thread for example, Blender will crash on the call that
redraws the UI.
Ref D13140
When the asset view in the sidebar of the pose library would contain
more than a few handful poses, interaction and animation playback
performance would be impacted considerably. This was because our icon
drawing scales image buffers using a rather slow method on the CPU.
This commit changes it so the asset icons are scaled using the GPU.
Note that this is a temporary change. I'd like all icon code to use
GPU-side scaling, see D13144. But such a change is too risky to do in
the release branch at this point, so this fix is specifically for the
3.0 release.
