When using ancored stroked the diameter of the stroke can be 0 what
leads to a division by zero that on certain platforms wrap to a large
negative number that cannot be looked up. This fix will clamp the size
of the brush to 1.
In some cases, the normal edit modifier calculated the normals on one
mesh with the "ensure" functions, then copied the mesh and retrieved
the layers "for write" on the copy. Since 59343ee162, normal
layers are never copied, and normals are allocated with malloc instead
of calloc, so the mutable memory was uninitialized.
Fix by calculating normals on the correct mesh, and also add a warning
to the "for write" functions in the header.
The check to see if newly requested attributes are not already in the
cache was not taking into account the possibility that we do not have
new requested attributes (`num_requests == 0`). In this case, if
`attr_used` already had attributes, but `attr_requested` is empty, we
would consider the cache as dirty, and needlessly rebuild the attribute
VBOs.
These features are complicated to support on GPU and hardly compatible
with subdivision in the first place. In the future, with T68891 and
T68893, subdivision and custom smooth shading will be separate workflows.
For now, and to better prepare for this future (although long term
plan), we should discourage workflows mixing subdivision and custom
smooth normals, and as such, this disables GPU subdivision when
autosmoothing or custom split normals are used.
This also adds a message in the modifier's UI to indicate that GPU
subdivision will be disabled if autosmooth or custom split normals are
used on the mesh.
Differential Revision: https://developer.blender.org/D14194
Reuse the same vertex normals calculation as for the GPU code, by
weighing each vertex normals by the angle of the edges incident to the
vertex on the face.
Additionally, remove limit normals, as the CPU code does not use them
either, and would also cause different shading issues when limit surface
is used.
Fixes T95242: shade smooth artifacts with edge crease and limit surface
Fixes T94919: subdivision, different shading between CPU and GPU
This operation can only be applied on one ID at a time, so only apply it
to the active Outliner item, and not all the selected ones.
Also renamed `Make Library Override` menu entry to `Make Library Override
Single` to emphasis this is not the 'default expected' option for the
user.
Trust user count to actually delete or not the dragged ID when current
dragging is cancelled, since it may be already used by others.
NOTE: This is more a band-aid fix than anything else, cancelling drag
has a lot of other issues here (like never deleting any indirectly
linked/appended data, etc.). It needs a proper rethink in general.
To keep consistency with the new contract option, the dilate now expand the shape beyond the internal closed area.
Note: This was committed only in master (3.2) by error.
This is requested by artist for some animation styles where is necessary to fill the area, but create a gap between fill and stroke.
Also some code cleanup and fix a bug in dilate for top area.
Reviewed By: pepeland, mendio
Differential Revision: https://developer.blender.org/D14082
Note: This was committed only in master (3.2) by error.
Without ray offsets intersections at neigbhoring triangles are found, as
the ray start is exactly at the vertex. There was a small offset towards
the center of the triangle, but not enough.
Now this offset computation is moved into Cycles and modified for better
results. It's still not perfect though like any offset approach, especially
with long thin triangles.
Additionaly, this uses the shadow terminate offset for AO rays now, which
helps remove some pre-existing artifacts.
Also fix a couple other places where normals layers weren't properly
tagged dirty or reallocated when the mesh changes.
Caused by cfa53e0fbe. When the size of a mesh changes,
the normal layers need to be reallocated. There were a couple of places
that cleared other runtime data with `BKE_mesh_runtime_clear_geometry`
but didn't deal with normals properly. Clearing the runtime "geometry"
is different from clearing the normals, because sometimes the size of
the normal layers doesn't have to change, in which case simply tagging
them dirty is fine.
When X-ray mode is active the selection is done using the mesh data to
select what is closest to the cursor. When GPU subdivision is active with
the "show on cage" modifier option, this fails as the mesh used for selection
is the unsubdivided one.
This creates a subdivision wrapper before running the selection routines to
ensure that subdivision is available on the CPU side as well.
Differential Revision: https://developer.blender.org/D14188
This was a double free error which happened because `BM_mesh_bm_from_me`
was taking ownership of arrays that were still owned by the Mesh. Note that
this only happens when the mesh is empty but some custom data layers still
have a non-null data pointer. While usually the data pointer should be null in
this case for performance reasons, other functions should still be able to
handle this situation.
Differential Revision: https://developer.blender.org/D14181
When exporting generated coordinates, the subdivision export code was
using the schema for the non-subdivision case, which is invalid as
non-initialized. This typo existed since the initial commit for the
feature (rBf9567f6c63e75feaf701fa7b78669b9a436f13dd).
The scale-to-fit option did nothing for single words when
the text box had a height. This happened because it was expected that
text would be wrapped however single words never wrap.
Now the same behavior for zero-height text boxes is used when text
can't be wrapped onto multiple lines.
0fd72a98ac called functions to set bezier handle positions
that used uninitialized memory. The fix is to define the handle positions
explicitly, like before.
Drag Action was constantly resetting itself to "move".
Solve this by storing the tool settings per tool and no longer clear
gizmo properties when activating a new tool.
Currently, when normals are calculated for a const mesh, a custom data
layer might be added if it doesn't already exist. Adding a custom data
layer to a mesh is not thread-safe, so this can be a problem in some
situations.
This commit moves derived mesh normals for polygons and
vertices out of `CustomData` to `Mesh_Runtime`. Most of the
hard work for this was already done by rBcfa53e0fbeed7178.
Some changes to logic elsewhere are necessary/helpful:
- No need to call both `BKE_mesh_runtime_clear_cache` and
`BKE_mesh_normals_tag_dirty`, since the former also does the latter.
- Cleanup/simplify mesh conversion and copying since normals are
handled with other runtime data.
Storing these normals like other runtime data clarifies their status
as derived data, meaning custom data moves more towards storing
original/editable data. This means normals won't automatically benefit
from the planned copy-on-write refactor (T95845), so it will have to be
added manually like for the other runtime data.
Differential Revision: https://developer.blender.org/D14154
Currently the RNA functions to add mesh elements like vertices
don't clear the runtime cache of things like triangulation, BVH
trees, etc. This is important, since they might be accessed with
incorrect sizes. This is split from a fix for T95839.
There was accidentally some displacement related code running even when not
using displacement.
Differential Revision: https://developer.blender.org/D14169
Previously, objects and geometries were mapped between frames
using different hash tables in a way that is incompatible with
geometry instances. That is because the geometry mapping happened
without looking at the `persistent_id` of instances, which is not possible
anymore. Now, there is just one mapping that identifies the same
object at multiple points in time.
There are also two new caches for duplicated vbos and textures used for
motion blur. This data has to be duplicated, otherwise it would be freed
when another time step is evaluated. This caching existed before, but is
now a bit more explicit and works for geometry instances as well.
Differential Revision: https://developer.blender.org/D13497
Reset Defaults left the undo stack in an invalid state,
with the active undo step left at the previous state then it should
have been.
Now the buttons own undo logic is used to perform undo pushes.
- No need for `normal_tx` array if we normalize the planes in `plane_tx`.
- No need to calculate the distance squared to a plane (with `dist_signed_squared_to_plane_v3`) if the plane is normalized. `plane_point_side_v3` gets the real distance, accurately, efficiently and also signed.
So normalize the planes of the member `CameraViewFrameData::plane_tx`.
This is a regression partially introduced in rB0a6f428be7f0.
Bones being transformed into edit mode were snapping to themselves.
And the bones of the pose mode weren't even snapping.
(Curious that this was not reported).
Since Python 3.10 is now supported on all platform,
bump the minimum version to reduce the number of Python versions that
need to be supported simultaneously.
Reviewed By: LazyDodo, sybren, mont29, brecht
Ref D13943
This is an alternate fix for T35170 since it caused T44415.
Having the undo system manipulate the key-block coordinates is error
prone as (in the case of T44415) there are situations when it's
important to apply the difference with the original shape key.
This reverts dab0bd9de6, and instead
avoids the problem by not using the data in `Mesh.key` as a reference
for updating shape-keys when exiting edit-mode.
The assumption that the `Mesh.key` in edit-mode won't be modified
until leaving edit-mode isn't always true. Leading to synchronization
errors. (details noted in code-comments).
Resolve this by using shape-key data stored in the BMesh.
Resolving both T35170 & T44415.
Details:
- Remove use of the original vertices when exiting edit mode.
- Remove use of the original shape-key coordinates when exiting
edit-mode (except as a last resort).
- Move shape-key synchronization into a separate function:
`bm_to_mesh_key`.
- Split the synchronization loop into two branches,
depending on the existence of BMesh shape-key coordinates.
- Always write shape-key values back to the BMesh CD_SHAPEKEY layers.
This was only done in some cases but is now necessary for all
shape-keys as these are used to calculate offsets where the `Mesh.key`
was previously used.
- Report a warning when the shape-key layer isn't found as this uses an
imperfect method of restoring coordinates which should only be used as
a last resort.
Reviewed By: mont29
Ref D14127
The problem was when the Object Offset was enabled because the Constant Offset flag was not checked and the offset always was added to the transformation matrix.
Limit the min and max of the IDProperty for the node group input
from 0 to infinity, and the soft min and max between 0 and 1.
Thanks to @PratikPB2123 for investigation.
Instead of accessing the `CD_NORMAL` layer directly,
use the proper API for accessing mesh normals. Even if the
layer exists, the values might be incorrect due to a deformation.
Related to ef0e21f0ae, 969c4a45ce, and T95839.
The flags overlapped ever since normalize was added, so this requires
versioning to copy the flag value.
Differential Revision: https://developer.blender.org/D14165
The code was using the same flag value for different modifiers,
resulting in matching the toggle to random overlapping flags.
Differential Revision: https://developer.blender.org/D14165
The node animation versioning code passes `nullptr` to the `oldName` and
`newName` parameters, but those weren't `NULL`-safe. I added an extra
check for this.
No functional changes, just a crash fix.
