This corrects some alignments issues through new margins introduced in
93544b641b. Basic idea of this fix is to only add the new margins when
drawing a panel with background. These margins were added specifically
for the background boxes, so that makes sense.
Alternative fix to D13199.
This also fixes some margings added unintentionally in mentioned commit.
There is a little jump of the toolbar and the tabs in the Properties
when comparing the UI without this fix to 2.93:
{F12158085} {F12158039}
The jump is gone with this fix applied (compare to the 2.93 screenshot):
{F12158064}
While not a serious issue, this confirms that this fix actually tackles
the root of the issue.
Don't use the side padding for menu item contents when displaying
previews or icons in a row or grid layout. This can cause problems for
the preview drawing and doesn't make sense to draw there anyway.
This not only fixes the mentioned issue, but also too small heighlight
for the collection color tag in the Outliner context menu.
Alternative to and similar to D13125.
Assigning a catalog to an asset via drag-and-drop in the asset browser
now creates an undo step. Not only does this allow undoing the action,
it also tags the blend file as modified.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D13370
Liboverride properties and operations list need to be fully up-to-date
before libraries are reloaded, otherwise re-applying those liboverrides
after linked data is reloaded may miss some changes.
This reverts the changes to fix T87448, where entering the same value in number
buttons causes an unnecessary update. This is not stable enough for 3.0 and so
is being reverted, better to have an unnecessary update than no update in other
cases.
This effectively reverts the changes from rBeb06ccc32462 and follow up fixes
rBe1a9ba94c599, rBbbb52a462ef9, rBec30cf0b742f, and rB071799d4fc44. The code is
disabled with a comment on how it could be implemented better.
Caused by {rBcf2baa585cc8}.
For Curve Guide force fields to work, the `Path Animation` option has to
be enabled. With it disabled, we are lacking the necessary
`anim_path_accum_length` data initialized [done by
`BKE_anim_path_calc_data`] which `BKE_where_on_path` relies on since
above commit.
Now just check for this before using it - and return early otherwise.
Prior to said commit, `BKE_where_on_path` would equally return early
with a similar message, so that is expected behavior here.
Maniphest Tasks: T93338
Differential Revision: https://developer.blender.org/D13371
The issue was that the attribute propagation in the Fillet Curve node seems
pretty broken. I couldn't really make sense of the old code. It changed the
size of the point attribute domains on splines to 1 for some reason which
led to a crash in the next node.
Differential Revision: https://developer.blender.org/D13362
The mirror modifiers merge option caused unnecessary re-ordering
to the vertex array with original vertices merging into their copies.
While this wasn't an error, it meant creating a 1:1 mapping from input
vertices to their final output wasn't reliable (when looping over
vertices first to last) as is done in
BKE_editmesh_vert_coords_when_deformed.
As merging in either direction is supported, keep the source meshes
vertices in-order since it allows the vertex coordinates to be extracted.
NOTE: Since this change introduce issues for some cases (e.g. bound
modifiers like SurfaceDeform), this change is only applied to newly
created modifiers, existing ones will still use the old incorrect merge
behavior.
Reviewed By: @brecht
Maniphest Tasks: T93321, T91444
Differential Revision: https://developer.blender.org/D13355
Revert "Fix T91444: Edge Loop Preview fails with two Mirror Modifiers"
This reverts commit 1a7757b0bc.
Caused issue reported in T93321, boiling down to the fact that other
operations or modifiers (like the SurfaceDeform one) rely on the order
of the vertices in the mesh to remain consistent.
Changing this in a modifier would mean those operations need to be
reset/re-created (e.g. rebound for the SurfaceDeform case), which is not
doable in `do_version` code.
Was happening during rendering, causing visual artifacts when doing
CPU+GPU rendering, and giving different in-progress results on different
devices.
The root of the issue comes to the fact that math used in the approximate
shadow catcher calculation might have resulted in negative alpha channel,
and negative values for display are handled differently on CPU and GPU.
Such difference in handling is caused by an approximate conversion used on
the CPU for the performance reasons.
This change makes it so no negative alpha is generated by the approximate
shadow catcher. Not sure if we need some explicit clamping somewhere to
deal with possible negative values coming from somewhere else.
The shadow catcher cornell box tests are to be updated for the new code,
but the new result seems to be more accurate.
Differential Revision: https://developer.blender.org/D13354
Noticed when was looking into T93155. Steps to reproduce:
- Open the .blend file from the report
- Hit F12 to start rendering
- After some tiles were rendered hit Esc
The issue is caused by "sticky" cancel reported via Progress. This means
that once user hit Esc all further requests for cancel state will return
truth, which was preventing OIDN denoiser from completing the denoising
task.
Now only allow stopping the denoiser when interactive rendering requests
a very fast stopping.
Aiming the fix for 3.0 branch.
Differential Revision: https://developer.blender.org/D13352
With the current code in master, scrambling distance is enabled on non-hardware accelerated ray tracing devices see a measurable performance decrease when compared scrambling distance on vs off. From testing, this performance decrease comes from the large tile sizes scheduled in `tile.cpp`.
This patch attempts to address the performance decrease by using different algorithms to calculate the tile size for devices with hardware accelerated ray traversal and devices without. Large tile sizes for hardware accelerated devices and small tile sizes for others.
Most of this code is based on proposals from @brecht and @leesonw
Reviewed By: brecht, leesonw
Differential Revision: https://developer.blender.org/D13042
This commit improves the scaling of some ui widgets when
zooming by making the radius of the rounded corners
dependent on the element's zoom level.
Needed to fix T92278 without padding issues, see D13125.
Reviewed By: Hans Goudey, Julian Eisel
Differential Revision: https://developer.blender.org/D12842
There are two functions that recalculate the boundbox of an object:
- One that considers the evaluated geometry
- Another that only considers the object's `data`.
Most of the time, the bound box is calculated on the final object
(with modifiers), so it doesn't seem right to just rely on `ob->data`
to recalculate the `ob->runtime.bb`.
Be sure to calculate the BoundBox based on the final geometry and
only use `ob->data` as a fallback
Differential Revision: https://developer.blender.org/D12282
Changes icon used to indicate blend file when overlaid over larger
document icon when in thumbnail view. Only seen when file does not
have a preview.
Followup to {rB611e4ffaab43}
For more details and examples see D13342
Differential Revision: https://developer.blender.org/D13342
Reviewed by Julian Eisel
Without this it's easy to loose track of which catalog you are dragging.
Things feel generally quite jumpy/disconnected, activating the catalog
makes things feel far less like that.
I consider this an important usability fix, therefore I'm adding it to
the release branch.
When dropping catalogs it is ensured that the name of the moved catalog
is unique within the new parent catalog. When dropping a catalog into
the parent, the catalog would not actually move to a different location,
but it would still be renamed. The unique name logic simply isn't smart
enough to ignore the catalog that is about to be moved.
Address this by disallowing dragging a catalog into its own parent. It's
already there.
This was an oversight when I added catalog drag & drop support. I forgot
to add this for dragging catalogs into the top level by dragging into to
the "All" item as well. This made the drag & drop support rather broken
because it wouldn't work for a basic case.
This part of the drawing code assumes that the bone custom object
has only one evaluated geometry component, and it also uses the
object type to check which data to draw, with the functions like
`DRW_cache_object_surface_get` that just take an object input.
Those functions usually work on evaluated objects, which use the
instancing system to access a temporary object with `object.data`
replaced for data types that don't match the original object.
That assumption used to work, but now curve, point cloud, or volume
objects can have an evaluated mesh which is not accessed with the
same object for render engine drawing.
The "correct" solution for the way this code is structured would be to
loop through all of the geometry components and try to get GPU batches
from every one of them. However, that significantly increases complexity
in an area that should probably be refactored anyway. This patch treats
the mesh as a special case, and only draws the evaluated mesh.
The **best** solution in my opinion might be refactoring this area to
use the instancing system with some sort of viewport-only flag so
the custom shape instances aren't added in the render.
The solution is "partial" because the "Wireframe" option only works
for meshes from mesh objects, even after this fix, and because other
data besides meshes is not displayed at all.
Differential Revision: https://developer.blender.org/D13038
The patch slightly modifies two recently added icons "FILE_BLEND" and
"CURRENT_FILE" to better align them to the pixel grid, and change the
design of "FILE_BACKUP" to avoid alignment and readability issues, as
well as avoiding the outline version of the Blender logo which violates
the official logo guidelines.
Differential revision: https://developer.blender.org/D13346
There are few layers of things which lead to the situation
of more noisy material preview: the do-version of the
preview.blend did not happen (at least from the Python
side as we did not investigate the C side deep). This made
Cycles to use default integrator settings for the preview
file ever since the Cycles X was merged. Those settings are
adaptive sampling with max 4K samples, noise threshold 0.01.
Opening the file in Blender 3.0 for edit did run the versioning
code which effectively lowered the number of samples used for
rendering.
This change makes it so the preview file is configured with
the exact effective settings as seen by Cycles prior to the
file was re-saved (adaptive sampling with the parameters noted
above).
This fix does not chaneg the fact that the versioning code is
not used for preview.blend, it only solves the regression in
the quality of previews.
The fix is done and reviewed with collaboration with Dalai and Sergey.
Basically, this fixes disappearing previews when editing asset metadata
or performing undo/redo actions.
The preview generation in a background job will eventually modify ID
data, but the undo push was done prior to that. So obviously, an undo
then would mean the preview is lost.
This patch makes it so undo/redo will regenerate the preview, if the preview
rendering was invoked but not finished in the undone/redone state.
The preview flag PRV_UNFINISHED wasn't entirely what we needed. So I had to
change it to a slightly different flag, with different semantics.
In rBdcdbaf89bd11, I introduced a new operator
(`file.asset_library_refresh()`) to handle Asset Browser refreshing more
separate from File Browser refreshing. However, there already was
`asset.asset_list_refresh()`, which at this point only works for asset
view templates, but was intended to cover the Asset Browser case in
future too. This would happen once the Asset Browser uses the asset list
design of the asset view template.
So rather than having two operators for refreshing asset library data,
have one that just handles both cases, until they converge into one.
This avoids changes to the Python API in future (deprecating/changing
operators).
Differential Revision: https://developer.blender.org/D13239
Alternative to D13291 (description partially copied from there).
New drag & drop reordering code would call constraints reordering
operator with the generic context, and not the one from the panel's
layout. missing the "constraint" member which is mandatory for poll
function to properly deal with override vs. local constraints.
For this to work in a decent way, there needs to be some panel-wide
context that we can restore when executing callbacks outside of the
normal draw context. So similar to uiLayoutSetContextPointer() to set
context on a layout level, this introduces
UI_panel_context_pointer_set() for panel level context (this calls the
former for the current panel root layout as well).
Differential Revision: https://developer.blender.org/D13308
The bounding box transform code assumed that the pivot would always be
the sequence object transform center.
Rework the code so that this assumption is true even if the general
transform pivot is set to be the 2D cursor.
Previously, attribute propagation did not work correctly in when only
deleting edges and faces (but not points). Face and face corner attributes
were propagated wrongly or not at all respectively.
In order to keep the patch relatively small for the release branch,
it does not include some small optimizations. These can be done in 3.1:
* Use a `Span<int>` instead of `IndexMask` to avoid creating an
unnecessary `Vector<int64_t>`.
* Only prepare index mappings when there are actually attributes to
propagate.
Differential Revision: https://developer.blender.org/D13338
This disables motion blur for geometry instances in eevee, which did
not work correctly anyway. See code comment for more details.
Differential Revision: https://developer.blender.org/D13334
This happens if the Wavelength is set to 0.0f.
Not sure if we really need a do_version patch for old files, as an
alternative we could also force a slight offset in the
SinusDisplacementShader. This patch does not do either, just force a
positive range from now on.
Maniphest Tasks: T93322
Differential Revision: https://developer.blender.org/D13329
21.Q4 is required, older version should not show devices in the preferences.
This adds a check for the file version of amdhip64.dll file during hipew
initialization.
Differential Revision: https://developer.blender.org/D13324
This was just a typo in {rBb408d8af31c9}
Must be 'MINIMUM' (instead of 'MININUM').
Maniphest Tasks: T93320
Differential Revision: https://developer.blender.org/D13328
Intention of the icon is to mark add-ons that are official/bundled.
Doesn't make much sense to use the .blend file icon for that. It's
arguable if the Blender logo should be used for this, but the file icon
is definitely the wrong choice.
This changes what domain is used by the raycast mode. This should fix the
behavior for face corner attributes (but may make it a bit slower for other
attributes). I think for 3.0 this is an acceptable trade off. For 3.1 we can do
what the comment suggests already.
Differential Revision: https://developer.blender.org/D13333
The problem was that we forgot to actually remove the vertex group when
it should be deleted. We only removed all the data that was attached to it.
Differential Revision: https://developer.blender.org/D13326
rB33c5e7bcd5e5b79 doversion code was incorrectly dealing with 'insert in
first position' case from older blendfiles.
Specifically, a NULL anchor is valid (it means that the new item is the
first of the stored override data, and should be inserted at start of
the list).
Reported as part of T93321.
The Blender icon must not be used to refer to anything that is not
Blender itself. Using the Blender icon on its own to refer to .blend
files or the currently open file is a no-go, which was brought up by
Ton.
This does the following changes to the icon file:
* Add new "Current File" icon
* Change the .blend file icon to contain a file icon with the Blender
logo, but not merely the Blender logo.
* Change the backup .blend file icon accordingly.
The new "Current File" icon is used in the Asset Browser, but
could/should be used in the Outliner as well. That needs more design
discussion though.
