This was left over from when these scripts were loaded as modules,
where their names needed to be compatible with Pythons module naming.
Version patch existing files so text with register enabled
without a `.py` extension wont start executing on startup.
Resolves T89532.
This supported calculating normals for MPoly array which was copied to
an MFace aligned array.
Remove the functions entirely since MFace use is being phased out and
these function isn't used anywhere.
Use BKE_mesh_calc_normals instead of
BKE_mesh_calc_normals_mapping_simple for curve modifier calculation.
This only made sense for derived-mesh which is no longer used.
Remove the 'only_face_normals' argument.
- BKE_mesh_calc_normals_poly for polygon normals.
- BKE_mesh_calc_normals_poly_and_vertex for poly and vertex normals.
Order arguments logically:
- Pair array and length arguments.
- Position normal array arguments (to be filled) last.
Optimize mesh normal calculation.
- Remove the intermediate `lnors_weighted` array, accumulate directly
into the normal array using a spin-lock for thread safety.
- Remove single threaded iteration over loops
(normal calculation is now fully multi-threaded).
- Remove stack array (alloca) for pre-calculating edge-directions.
Summary of Performance Characteristics:
- The largest gains are for single high poly meshes, with isolated
normal-calculation benchmarks of meshes over ~1.5 million showing
2x+ speedup, ~25 million polygons are ~2.85x faster.
- Single lower poly meshes (250k polys) can be ~2x slower.
Since these meshes aren't normally a bottleneck,
and this problem isn't noticeable on large scenes,
we considered the performance trade-off reasonable.
- The performance difference reduces with larger scenes,
tests with production files from "Sprite Fight" showing
the same or slightly better overall performance.
NOTE: tested on a AMD Ryzen TR 3970X 32-Core.
For more details & benchmarking scripts, see the patch description.
Reviewed By: mont29
Ref D11993
Was reported for a file which does not have an active track set in
AnimData even though it was in strip twek mode (but this was accessed in
is_nlatrack_evaluatable()).
Root cause for this is not totally clear, but I assume the situation is
described as part T87681 (and is fixed in D11052).
This patch here just prevents the crash for files that are already in the
borked state.
Reviewers: sybren
Maniphest Tasks: T89805
Differential Revision: https://developer.blender.org/D12085
Add Apply Constraint, Duplicate Constraint, and Copy To Selected
operators, and include them in a menu similar to the menu for modifiers.
The shortcuts in the extras menu are also matched to modifiers.
All the here added operators are intended to work exactly like the
analogous ones for modifiers. That means the apply operator should apply
a constraint as if it was first in the list, just like modifiers do. I
have added the same warning message as for modifiers when that happens.
The decision to use this approach of appling the constraint as if it was
first, was made for consistency with modifiers. People are already used
to how it works there. Is also provides more intricate control over the
applied transforms, then just applying all constraints up to that one.
Apply all constraints is already kinda implemented in Bake Animation.
Reviewed By: HooglyBoogly, sybren, #user_interface
Differential Revision: https://developer.blender.org/D10914
Idea for 3.0 is to disable all functionality that isn't well polished
and focus on those parts first. Starting with poses.
* Adds a new experimental option "Extended Asset Browser", replacing
"Asset Browser".
* Unlike the previous option, this isn't enabled by default anymore.
This didn't work well in practice and caused plenty of confusion.
* "Mark as Asset" and "Clear Asset" are hidden if the option is
disabled.
* Same for the category selection in the Asset Browser.
* Always show display the "Only Assets" option in the File Browser while
browing inside .blend files. That way you can hide data-blocks that
are not pose assets.
* The Asset Library setup UI in the Preferences is always visible now,
it's needed for pose library access.
Addresses T90181, T90180 and T90300.
Differential Revision: https://developer.blender.org/D12120
ID data-blocks that could be accessed from Python and weren't freed
using BKE_id_free_ex did not release the Python reference count.
Add BKE_libblock_free_data_py function to clear the Python reference
in this case.
Add asserts to ensure no Python reference is held in situations
when ID's are copied for internal use (not exposed through the RNA API),
to ensure these kinds of leaks don't go by unnoticed again.
Added the comparison of non-generic attributes with generic
attributes in the same loop to avoid issues with different
order in layer->types of the two meshes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12149
Caused by {rB37570a73170e}.
Above commit wasnt taking into account that at this point the link could
still be NULL.
Maniphest Tasks: T90564
Differential Revision: https://developer.blender.org/D12180
In the `FileList` struct, rename the `AssetLibraryReference
*asset_library` field to `asset_library_ref` -- it's a description of
which asset library is used, and not the asset library itself.
This is to make space for a future `AssetLibrary *asset_library` field,
which will point to an actual asset library struct/class.
No functional changes.
Reviewed by: Severin
Differential Revision: https://developer.blender.org/D12151
Just like the "Select by Material" node, this node outputs a
boolean attribute for control points that have a matching handle
type. By default left and right handles are considered, but it's
possible to only check one side with the toggle in the node.
Differential Revision: https://developer.blender.org/D12135
Assigning a mesh seems to do its own parameter copying, which
means we need to manual copy its vertex groups here, which was
just overlooked in rB3b6ee8cee708.
Differential Revision: https://developer.blender.org/D12110
Generic attributes CD_PROP_* comparison is added in customdata_compare
Checks for built-in as well as user created attributes.
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D12137
Practice shows that when combining actions and direct animation
it is usually best to combine location, rotation and scale
separately, which is implemented by the Split Channels modes
recently introduced in D9469 for Copy Transforms. This completes
the same set of 6 choices for the Action Constraint.
The default for new constraints is changed to the newly
added Before Original (Split Channels) mode.
The original patch is motivated by Loic Pinsard, who created
an addon that does the equivalent of this feature by splitting
the action into two, separating location and rotation+scale.
Differential Revision: https://developer.blender.org/D7547
The immediate reason for this is that we want to be able to initialize them
to different defaults for light objects, which is hard with Python properties.
But in general it is useful to be able to share these with other renderers.
As a side effect, Eevee now supports a per-object holdout instead of only
per-collection.
Differential Revision: https://developer.blender.org/D12133
Code freeing the array would not properly reset its length value to
zero.
Note that this corrupted data could also be saved in .blend files, so
had to bump fileversion and add some doversion code too.
Fix T90166: crash when creating a liboverride.
This is a simple engine used only to debug the texture of select ids.
It is only used when the `WITH_DRAW_DEBUG` option is enabled and the
debug value is 31.
Reviewed By: fclem
Differential Revision: https://developer.blender.org/D5490
LibOverride of scenes is not really supported currently, there are many
issues with it.
Will disable most user-accessible ways to create such overrides in a
following commit.
Even though the ID itself remain the same after being made local, from
depsgraph point of view this is a different ID. Hence we need to tag all
of its users for COW update, as well as rebuild depsgraph relationships.
Should be also backported to LTS 2.93 (and 2.83 if possible).
This makes the internal naming consistent with the public API. And also gives
us a visibility_flag rather than restrictflag that can be extended with more
flags.
While most modifies don't handle out of memory cases, ocean simulation
could attempt huge allocations: 2048 gb at the maximum resolution.
Resolves T83952.
This node sets the selected (or all) splines in curve to a chosen target
spline type. Poly, Bezier, and NURB splines can be converted to any of
the other types. This is meant to be a building block node, useful in
many procedural situations.
In the future the node could be optimized with multi-threading, or by
avoiding copying in many cases, either by retrieving the curve for write
access or by passing the raw vectors to the new splines where possible.
With edits from Hans Goudey (@HooglyBoogly)
Differential Revision: https://developer.blender.org/D12013
Fix division by zero when `BKE_bone_parent_transform_invert()` inverts a
scale vector with zero components.
Zero values in the to-be-inverted vector are now simply skipped, i.e.
remain zero after inversion. This at least ensures that
`invert_v3_safe(invert_v3_safe(vector))` results in the same vector.
This commit does NOT fix the conceptual problem that an inversion of a
potentially non-invertible vector is relied upon. It just avoids the
division by zero.
When calculating the particle step in `get_effector_tot`, we have to
round up (otherwise we might get an extra round in the for-loop in
`BKE_effectors_apply` for certain cases).
Example from the report:
- 10.000 particles, Effector Amount 3
- was rounding the step down to 3333
- going into the for-loop for 0, 3333, 6666 and 9999 (4 times)
- now rounding the step up to 3334
- going into the for-loop for 0, 3334 and 6668 (3 times as desired)
Maniphest Tasks: T90346
Differential Revision: https://developer.blender.org/D12113
Extend the 'reading error' container to produce the generic short
message in the popup directly visible by the user, and move all detailed
info the `INFO` reports that only show up in the console and Info
editor.
This is an initial implementation of a USD importer.
This work is comprised of Tangent Animation's open source USD importer,
combined with features @makowalski had implemented.
The design is very similar to the approach taken in the Alembic
importer. The core functionality resides in a collection of "reader"
classes, each of which is responsible for converting an instance of a
USD prim to the corresponding Blender Object representation.
The flow of control for the conversion can be followed in the
`import_startjob()` and `import_endjob()` functions in `usd_capi.cc`.
The `USDStageReader` class is responsible for traversing the USD stage
and instantiating the appropriate readers.
Reviewed By: sybren, HooglyBoogly
Differential Revision: https://developer.blender.org/D10700
