Clipping start is negative when the viewport preview is used with the orthographic view,
while Freestyle assumes that imported mesh data are in the camera coordinate system
with the view point located at origin. The present solution is to adjust the clipping
start/end and introduce a Z-axis offset for mesh vertices so as to satisfy the assumption.
Problem report by flokkievids in the BA Freestyle thread, thanks!
Also made changes to suppress warnings in strip creation when Freestyle debugging is disabled.
Now add_freestyle() in pipeline.c takes a second argument to enable/disable
stroke rendering. When stroke rendering is disabled, the function allocates
data structures but does not perform stroke rendering. The allocated data
structures (mostly left unpopulated with data elements) are intended to allow
for the Read Full Sample Layers (Shift-R) command in the compositor.
When the sketchy chaining is used, stroke geometry may contain a 180-degree U-turn.
If the 'error' parameter of the Bezier Curve geometry modifier is small (e.g., 10),
Bezier curve fitting will recursively split the original stroke into two pieces.
This splitting may take place at a U-turn point, causing a numerical singularity issue
that leads to a crash.
Problem report by edna in the BA Freestyle thread, with an example .blend to reproduce
the problem. Thanks a lot!
There were two issues:
- Line visibility computations are very slow in the case of the provided .blend file, which gave
an impression that the rendering process got stuck. The slowness can be explained by the present
data structures used for the line visibility computations, together with the specific mesh distribution
of the test scene. At the moment Freestyle uses a regular grid in the 2D image coordinate system
to divide tris/quads into small groups in order to accelerate the line visibility computations.
On the other hand, the test scene is populated a big plane (made of one quad) and a moderately
detailed mesh object (22K tris). The scale of the latter mesh is animated from nearly zero to
about 0.2 to make the object show up over time. When the scale is nearly equal to zero, all the
tris concentrate in one grid cell, so essentially there is no performance gain from the grid data
structure optimized for speed. It looks like a better grid data structure (possibly based on
adaptive grid refinement) is necessary to genuinely address the identified performance issue. For now
the progress bar of Blender is employed to better inform users of the amount of work done in the line
visibility computations.
- A crash was caused by an excessive memory allocation request. The X and Y dimensions of the grid
data structure are determined based on the average area of mesh faces in the given scene. When the big
plane in the test scene is excluded from the rendering, the average area is almost zero (on the order
of 1e-5). As a result of this extremely small average area, the X and Y dimensions were set to a very
large number, causing a fatal memory allocation error. The present revision has introduced a hard
upper limit to the dimensions of the grid data structure to avoid this kind of numerical instability.
Suitable for inclusion in 2.67a.
Logical AND, OR and XOR operations on freestyle.Nature instances gave an error in some cases.
The updated C implementation of these bitwise operations is intended to reproduce the following Python implementation:
class Nature(int):
def __and__(self, other):
return Nature(int(self) & int(other))
def __or__(self, other):
return Nature(int(self) | int(other))
def __xor__(self, other):
return Nature(int(self) ^ int(other))
The problem report was by plasmasolutions on IRC, thanks a lot!
SpatialNoiseShader, as well as SmoothingShader were not updating stroke length after
geometry modification, causing an infinite loop in Stroke::Resample(int iNPoints) due to
incorrect length-based resampling of stroke vertices.
Reverted the trunk revision 56136 and part of revision 56127 concerning the local Main
for Freestyle and temporary scene generation for stroke rendering.
The function do_merge_fullsample() in pipeline.c has access to the Scene of each Render,
so that the temporary Scene generated by Freestyle has to be kept for FSAA even after
stroke rendering has been done. By the same token, the local Main has been moved from
the BlenderStrokeRenderer class to Render. It is noted that free_all_freestyle_renders()
in pipeline.c is intended to get the temporary Scene of each Render released specifically
taking account of the FSAA case.
It's more like an ownership thing, but it's not so much
clear who actually is an owner of temporary scene, so
for now just ensure Render does not have link to it
after strokes are rendered.
There're also suspicious thing related on why separate
RE_free_database is needed for freestyle renders, but
that's also another story.
This means main database is no longer pollutes with
temporary scene and objects needed for freestyle
render.
Actually, there're few of separated temporary mains
now. Ideally it's better to use single one, but it's
not so much trivial to pass it to all classes. Not
so big deal actually.
Required some changes to blender kernel, to make it
possible to add object to a given main, also to
check on mesh materials for objects in given main.
This is all straightforward changes.
As an additional, solved issue with main database
being infinitely polluted with text blocks created
by create_lineset_handler function.
This fixes:
- #35003: Freestyle crashes if user expands objects in FRS1_Scene
- #35012: ctrl+f12 rendering crashes when using Freestyle
Because of our release soon, feature has been added behind the Debug Menu.
CTRL+ALT+D and set it to -1. Or commandline --debug-value -1.
When debug set to -1, you can put the viewport to 'render' mode, just like
for Cycles. Notes for testers: (and please no bugs in tracker for this :)
- It renders without AA, MBlur, Panorama, Sequence, Composite
- Only active render layer gets rendered. Select another layer will re-render.
- But yes: it works for FreeStyle renders!
- Also does great for local view.
- BI is not well suited for incremental renders on view changes. This only
works for non-raytrace scenes, or zoom in ortho or camera mode, or for
Material changes. In most cases a full re-render is being done.
- ESC works to stop the preview render.
- Borders render as well. (CTRL+B)
- Force a refresh with arrow key left/right. A lot of settings don't trigger
re-render yet.
Tech notes:
- FreeStyle is adding a lot of temp objects/meshes in the Main database. This
caused DepsGraph to trigger changes (and redraws). I've prepended the names
for these temp objects with char number 27 (ESC), and made these names be
ignored for tag update checking.
- Fixed some bugs that were noticable with such excessive re-renders, like
for opening file window, quit during renders.
Least-squares fitting parameters were stored in a fixed size array, causing a
buffer overflow depending on the number of input points.
Problem report with a .blend file to reproduce the issue and a bugfix patch by
christiankrupa and jensverwiebe on IRC, thanks a lot!
Many thanks also to Bastien Montagne for forwarding the problem report by email.
A crash in the Freestyle renderer was reported by Ton on IRC with a stack trace
below. Note that #2 is in Freestyle, whereas #1 is in the compositor. The problem
was observed in a debug build on OS X 10.7 (gcc 4.2, openmp disabled, no llvm).
----------------------------------------------------------------------
Program received signal EXC_BAD_ACCESS, Could not access memory.
Reason: 13 at address: 0x0000000000000000
[Switching to process 72386 thread 0xf303]
0x0000000100c129f3 in NodeBase::~NodeBase (this=0x10e501c80) at COM_NodeBase.cpp:43
43 delete (this->m_outputsockets.back());
Current language: auto; currently c++
(gdb) where
#0 0x0000000100c129f3 in NodeBase::~NodeBase (this=0x10e501c80) at COM_NodeBase.cpp:43
#1 0x0000000100c29066 in Node::~Node (this=0x10e501c80) at COM_Node.h:49
#2 0x000000010089c273 in NodeShape::~NodeShape (this=0x10e501c80) at NodeShape.cpp:43
#3 0x000000010089910b in NodeGroup::destroy (this=0x10e501da0) at NodeGroup.cpp:61
#4 0x00000001008990cd in NodeGroup::destroy (this=0x10e5014b0) at NodeGroup.cpp:59
#5 0x00000001008990cd in NodeGroup::destroy (this=0x114e18da0) at NodeGroup.cpp:59
#6 0x00000001007e6602 in Controller::ClearRootNode (this=0x114e19640) at Controller.cpp:329
#7 0x00000001007ea52e in Controller::LoadMesh (this=0x114e19640, re=0x10aba4638, srl=0x1140f5258) at Controller.cpp:302
#8 0x00000001008030ad in prepare (re=0x10aba4638, srl=0x1140f5258) at FRS_freestyle.cpp:302
#9 0x000000010080457a in FRS_do_stroke_rendering (re=0x10aba4638, srl=0x1140f5258) at FRS_freestyle.cpp:600
#10 0x00000001006aeb9d in add_freestyle (re=0x10aba4638) at pipeline.c:1584
#11 0x00000001006aceb7 in do_render_3d (re=0x10aba4638) at pipeline.c:1094
#12 0x00000001006ae061 in do_render_fields_blur_3d (re=0x10aba4638) at pipeline.c:1367
#13 0x00000001006afa16 in do_render_composite_fields_blur_3d (re=0x10aba4638) at pipeline.c:1815
#14 0x00000001006b04e4 in do_render_all_options (re=0x10aba4638) at pipeline.c:2021
----------------------------------------------------------------------
Apparently a name conflict between the two Blender modules is taking place.
The present commit hence intends to address it by putting all the Freestyle C++
classes in the namespace 'Freestyle'. This revision will also prevent potential
name conflicts with other Blender modules in the future.
Special thanks to Lukas Toenne for the help with C++ namespace.
