This replaces sequential ray moving followed with scene intersection with
single BVH traversal, which gives us all possible intersections.
Only implemented for CPU, due to qsort and a bigger memory usage on GPU
which we rather avoid. GPU still uses the regular bvh volume intersection code, while CPU now uses the new code.
This improves render performance for scenes with:
a) Camera inside volume mesh
b) SSS mesh intersecting a volume mesh/domain
In simple volume files (not much geometry) performance is roughly the same
(slightly faster). In files with a lot of geometry, the performance
increase is larger. bmps.blend with a volume shader and camera inside the
mesh, it renders ~10% faster here.
Patch by Sergey and myself.
Differential Revision: https://developer.blender.org/D1264
Object flags are depending on bounding box which is only available after
mesh synchronization.
This was broken since 7fd4c44 which happened quite close to the release
and oddly enough was not sopped by anyone. Render test is coming for this.
Was spotted by Thomas Dinges while working on another patch.
This patch adds support for light portals: objects that help sampling the
environment light, therefore improving convergence. Using them tor other
lights in a unidirectional pathtracer is virtually useless.
The sampling is done with the area-preserving code already used for area lamps.
MIS is used both for combination of different portals and for combining portal-
and envmap-sampling.
The direction of portals is considered, they aren't used if the sampling point
is behind them.
Reviewers: sergey, dingto, #cycles
Reviewed By: dingto, #cycles
Subscribers: Lapineige, nutel, jtheninja, dsisco11, januz, vitorbalbio, candreacchio, TARDISMaker, lichtwerk, ace_dragon, marcog, mib2berlin, Tunge, lopataasdf, lordodin, sergey, dingto
Differential Revision: https://developer.blender.org/D1133
This more a workaround for CUDA optimizer which can't optimize clamp(x, 0, 1)
into a single instruction and uses 4 instructions instead.
Original patch by @lockal with own modification:
Don't make changes outside of the kernel. They don't make any difference
anyway and term saturate() has a bit different meaning outside of kernel.
This gives around 2% of speedup in Barcelona file, but in more complex shader
setups with lots of math nodes with clamping speedup could be much nicer.
Subscribers: dingto
Projects: #cycles
Differential Revision: https://developer.blender.org/D1224
This way we can get rid of inefficient memory usage caused by BVH boundbox
part being unused by leaf nodes but still being allocated for them. Doing
such split allows to save 6 of float4 values for QBVH per leaf node and 3
of float4 values for regular BVH per leaf node.
This translates into following memory save using 01.01.01.G rendered
without hair:
Device memory size Device memory peak Global memory peak
Before the patch: 4957 5051 7668
With the patch: 4467 4562 7332
The measurements are done against current master. Still need to run speed tests
and it's hard to predict if it's faster or not: on the one hand leaf nodes are
now much more coherent in cache, on the other hand they're not so much coherent
with regular nodes anymore.
Reviewers: brecht, juicyfruit
Subscribers: venomgfx, eyecandy
Differential Revision: https://developer.blender.org/D1236
This way memory overhead caused by the BVH building is not so visible and peak
memory usage will be reduced.
Implementing this idea is not so straightforward actually, because we need to
synchronize images used for true displacement before meshes. Detecting whether
image is used for true displacement is not so striaghtforward, so for now all
all displacement types will synchronize images used for them.
Such change brings memory usage from 4.1G to 4.0G with the 01_01_01_D scene
from gooseberry. With 01_01_01_G scene it's 7.6G vs. 6.8G (before and after
the patch).
Reviewers: campbellbarton, juicyfruit, brecht
Subscribers: eyecandy
Differential Revision: https://developer.blender.org/D1217
Combine all the highpoly pixel arrays into a single array with a lookup
object_id for each of the highpoly objects.
Note: This changes the Bake API, external engines should refer to the
bake_api.c for the latest API.
Many thanks for Sergey Sharybin for the complete review, changes
suggestion and feedback. (you rock!)
Reviewers: sergey
Subscribers: pildanovak, marcclintdion, monio, metalliandy, brecht
Maniphest Tasks: T41092
Differential Revision: https://developer.blender.org/D772
Issue was caused by MSVC not being able to optimize some code out in the same
way as GCC/Clang does, so now that parts of code are explicitly unfolded in
order to help compilers out.
This makes speed loss much less drastic on my laptop. That's probably as good
as we can do with MSVC without investing infinite amount of time looking trying
to workaround the optimizer.
Originally we thought it's needed in order to distinguish builtin file from
filename which starts with '@', but the filepath is actually full path there
and it's unlikely to have file system where '@' is a proper root character.
Surprisingly this does not give visible speed differences, but it's still
nice to get rid of redundant check.
There were two major problems with the interactivity of material previews:
- Beckmann tables were re-generated on every material tweak.
This is because preview scene is not set to be persistent, so re-triggering
the render leads to the full scene re-sync.
- Images could take rather noticeable time to load with OIIO from the disk
on every tweak.
This patch addressed this two issues in the following way:
- Beckmann tables are now static on CPU memory.
They're couple of hundred kilobytes only, so wouldn't expect this to be
an issue. And they're needed for almost every render anyway.
This actually also makes blackbody table to be static, but it's even smaller
than beckmann table.
Not totally happy with this approach, but others seems to complicate things
quite a bit with all this render engine life time and so..
- For preview rendering all images are considered to be built-in. This means
instead of OIIO which re-loads images on every re-render they're coming
from ImBuf cache which is fully manageable from blender side and unused
images gets freed later.
This would make it impossible to have mipmapping with OSL for now, but we'll
be working on that later anyway and don't think mipmaps are really so crucial
for the material preview.
This seems to be a better alternative to making preview scene persistent,
because of much optimal memory control from blender side.
Reviewers: brecht, juicyfruit, campbellbarton, dingto
Subscribers: eyecandy, venomgfx
Differential Revision: https://developer.blender.org/D1132
Official Documentation:
http://www.blender.org/manual/render/workflows/multiview.html
Implemented Features
====================
Builtin Stereo Camera
* Convergence Mode
* Interocular Distance
* Convergence Distance
* Pivot Mode
Viewport
* Cameras
* Plane
* Volume
Compositor
* View Switch Node
* Image Node Multi-View OpenEXR support
Sequencer
* Image/Movie Strips 'Use Multiview'
UV/Image Editor
* Option to see Multi-View images in Stereo-3D or its individual images
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
I/O
* Save/Open Multi-View (OpenEXR, Stereo3D, individual views) images
Scene Render Views
* Ability to have an arbitrary number of views in the scene
Missing Bits
============
First rule of Multi-View bug report: If something is not working as it should *when Views is off* this is a severe bug, do mention this in the report.
Second rule is, if something works *when Views is off* but doesn't (or crashes) when *Views is on*, this is a important bug. Do mention this in the report.
Everything else is likely small todos, and may wait until we are sure none of the above is happening.
Apart from that there are those known issues:
* Compositor Image Node poorly working for Multi-View OpenEXR
(this was working prefectly before the 'Use Multi-View' functionality)
* Selecting camera from Multi-View when looking from camera is problematic
* Animation Playback (ctrl+F11) doesn't support stereo formats
* Wrong filepath when trying to play back animated scene
* Viewport Rendering doesn't support Multi-View
* Overscan Rendering
* Fullscreen display modes need to warn the user
* Object copy should be aware of views suffix
Acknowledgments
===============
* Francesco Siddi for the help with the original feature specs and design
* Brecht Van Lommel for the original review of the code and design early on
* Blender Foundation for the Development Fund to support the project wrap up
Final patch reviewers:
* Antony Riakiotakis (psy-fi)
* Campbell Barton (ideasman42)
* Julian Eisel (Severin)
* Sergey Sharybin (nazgul)
* Thomas Dinged (dingto)
Code contributors of the original branch in github:
* Alexey Akishin
* Gabriel Caraballo
It is still possible to free a bit more memory by detecting buildin images
which are not used by shaders, but that's not going to improve memory usage
that much to bother about this now.
Such change brings peak memory usage from 4.1GB to 3.4GB when rendering
01_01_01_D layout scene from the Gooseberry project. Mainly because of
freeing memory used by rather huge environment map in the viewport.
Reviewers: campbellbarton, juicyfruit
Subscribers: eyecandy
Differential Revision: https://developer.blender.org/D1215
This attribute is not really supported for volumes, so it get's converted to
constant 0 at shader compile time.
TODO: We should consider doing the same for tangent attribute in order to save
some annoying checks at tracing time.
Our own implementation is in fact the same performance as in fast_math from
OpenShadingLanguage, but implementation from fast_math is using explicit madd
function, which increases chance of compiler deciding to use intrinsics.
This patch is based on some work done in D788 and re-formulation from Beckmann
implementation in OpenShadingLanguage.
Skipping texture lookup helps a lot on GPUs where it's more expensive to access
texture memory than to do some extra calculation in threads.
CPU code still uses lookup-table based approach since this seems to be still
faster (at least on computers i've got access to).
This change gives about 2% speedup on BMW scene with GTX560TI.
It did not preserve stratification too well and lookup-table approach was
working much better. There are now also some more interesting forumlation
from Wenzel and OpenShadingLanguage which should work better than old code.
