Calling `MEM_freeN` on data allocated with `MEM_new` is bad, since it
will not call a destructor matching the one invoked as part of
`MEM_new`.
While in practice cases fixed below were 'not a problem' currently, as
they are trivial Cpp types (and therefore their destructor is doing
nothing), `MEM_freeN` has no way to ensure it is dealing with such a
trivial data type, so allowing such mismatch is dirty and dangerous.
Note that almost all fixed cases look more like unintentional mistakes
(mis-usages of `MEM_new` instead of `MEM_cnew`).
NOTE: There is one more (known!) case in the asset code, which fix is
slightly less trivial, and will go through a separate PR.
NOTE: This is a by-product of some work to detect such invalid usages of
`MEM_freeN` on memory chunks allocated with `MEM_new`.
Pull Request: https://projects.blender.org/blender/blender/pulls/123691
Basically this tries to make the API to stop and kill jobs more explicit &
consistent, so intent is expressed clearly & behavior as expected.
- Remove use of the job start callback address as identifier for the job.
6887dea786 already removed this pattern from the jobs system internals, this
commit also removes it from the API.
- Make stop & kill API and implementation consistent. E.g. don't stop/kill jobs
by either owner **or** type/callback in one function, and by owner (if
provided) **and** type/callback in another. Causes some small behavior
changes, documented inline.
- Use the same job type and API for all preview render jobs (change by Brecht).
There doesn't seem to be a need for the separated types, in fact the
separation might have caused some issues earlier (and added code complexity).
- Add/improve function documentation.
This does actually have subtle behavior changes that are known, see PR, but
they were investigated carefully and seem like implementing wanted behavior.
Co-authored-by: Brecht Van Lommel <brecht@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/123086
Now the `uiBlock` array for node is indexed with `node.index()` instead
of the draw-index which is not as readily available in some cases.
The main alternative would be to create an extra map from node index
to draw-index but that doesn't seem worth it right now.
The fix is to support interleaving the drawing of zones and frames.
The draw order is determined by the width of the zones/frames.
Larger areas are drawn before smaller ones. This makes sure that
everything is as visible as possible.
The zone border outlines are still drawn on top of all frames.
Solving that is technically more challenging, because we don't want
to use transparency for zone backgrounds because that results in
many possible mixed colors which we want to avoid. Fortunately,
drawing the outlines on top seems to be quite useful anyway.
The hidden socket in the Viewer is not shown when a new link to it is created.
This is because the hidden property of the socket is not updated when a new
link to it is created.
Fixing it by simply manually update the property after a new link is created.
Pull Request: https://projects.blender.org/blender/blender/pulls/120503
Extract
- Cycles denoiser enum.
- Extensions user preferences UI.
- Node operator poll message from new node function.
Improve
- Split "(Enabled|Disabled) on startup, overriding the preference."
into two messages.
Disambiguate
- "Add" when describing the action of adding something should use the
Operator context.
- "Dimensions", in noise textures.
- "Transform" as a noun, the matrix transform type of Geometry Nodes,
as opposed to the verb to move things in space.
- "Parent" as a noun or verb (the parent of an object, to parent an
object to another).
Some issues reported by Satoshi Yamasaki, deathblood, and Gabriel Gazzán.
Pull Request: https://projects.blender.org/blender/blender/pulls/122969
Masks are not updated when edited when using the GPU compositor. That's
because the GPU compositor caches static resources and invalidates them
according to the recalculate flags that the depsgraph flushes to IDs.
The issue is that the flags are not flushed to the evaluated IDs of the
compositor depsgraph, but rather to some other evaluated versions of the
IDs.
To fix this, we make the compositor depsgraph persistent and store it in
the scene runtime. This allows us to reliably track changes to resources
used by the compositor and also reduces the overhead of depsgraph
creation in the compositor job.
Patch originally provided by Sergey.
Fixes#121188.
Pull Request: https://projects.blender.org/blender/blender/pulls/123085
This patch removes the Auto Render option from the compositor. This is
done for the following reason:
- The option didn't really work except in the case of transforming an
object. So it wasn't really reliable.
- It made little sense to use since the introduction of the Viewport
Compositor.
- It had a number of UX issues, including the fact that it can't be used
with animation playback, and the fact that rendering can get in the
way of the UI depending on the preferences for temporary editors.
Pull Request: https://projects.blender.org/blender/blender/pulls/123132
- "Show the result of running commands in the main interface...": add
punctuation.
- "Re-Installed" -> "Reinstalled" seems more common.
- "increase_" and "decrease_subdivision" in the Grease Pencil
modal...: use title case instead of snake case for label.
- "Use a automatic number..." -> "an", typo.
- "... points,{} splines": missing space.
- "End Frame is larger than Start Frame": wrong order in error message.
- "Approximate the object as sphere, which diameter is equal to
thickness the defined...": grammar.
- "Show Seconds" -> "Use Timecode": this option is not necessarily about
seconds. Suggested by Pablo Vasquez.
- Brightness and contrast node input descriptions: add missing spaces.
- "Gamma controls the relative intensity... full white.": remove
trailing ".".
Pull Request: https://projects.blender.org/blender/blender/pulls/122972
A few of the recently added submenus are not included in the list of builtin
menus, so node assets under those catalog names will generate redundant submenus.
Fixes same issue as b49c84276c for newly added nested menus.
Pull Request: https://projects.blender.org/blender/blender/pulls/122855
It seems that when ensure_nodetree_previews calls duplicate_material,
ntreeLocalize removes the muted node from the copy of the nodetree,
so later in ensure_nodetree_previews nodeFindNodebyName can't find it
and therefore parent is NULL.
With this change, the muted node just doesn't get its preview updated.
Pull Request: https://projects.blender.org/blender/blender/pulls/122776
Add an overlay option to automatically display a label on reroute nodes.
This automatic label is propagated through chained reroute nodes and
is based on the explicit label of linked reroute nodes.
The automatic label is dimmed to distinguish it from manually set ones.
Pull Request: https://projects.blender.org/blender/blender/pulls/113368
Since ebb61ef30f reroute nodes couldn't be inserted on links anymore,
when their socket's type is currently incompatible.
Because the sockets of reroute nodes change types dynamically
according to the sockets they are linked to, it should always be
allowed to insert reroutes onto links.
Pull Request: https://projects.blender.org/blender/blender/pulls/122637
Blender crashes when toggling the compositor device from CPU to GPU.
This is because when submitting the compositor job, the device might be
set to CPU, so GPU related data are not initialized in the job, but
between the time the job is submitted and the time it gets executed, the
device might change to GPU, which then tries to accept the uninitialized
GPU data from the job.
To fix this, we use the evaluated scene from the depsgraph since it
captures the state of the scene used in the job initialization.
Pull Request: https://projects.blender.org/blender/blender/pulls/122661
Blender crashes when the interactive GPU compositor is running in a node
editor while rendering. This is because the GPU compositor is sharing
the same GPU context used for rendering, which is not allowed. To fix
this, we use a dedicated render list for interactive compositing, to use
its dedicated GPU context.
This is implemented by keeping another render list for the purpose of
compositing and similarly clearing its context when it is no longer
needed.
Pull Request: https://projects.blender.org/blender/blender/pulls/122472
Blender crashes when duplicating a node editor with an active
compositor session. That's because the runtime data of the editor is
nullptr upon duplication. This is a regression in 51a7961e09, where the
runtime data was set to nullptr upon duplication, while it should be
assigned a newly allocated structure or duplicate the existing
structure. To fix this, we do the former and allocate a new structure
because that's what the developer intended in the original patch.
The crash is rare and went unnoticed because the runtime data is
initialized in the init method as well, which typically gets called
quickly right after the area is duplicated.
Pull Request: https://projects.blender.org/blender/blender/pulls/122506
This patch makes it such that the GPU context required for the
compositor is only created when the GPU compositor is in use. This
should fix#121761 for the CPU compositor, but generally also make the
CPU compositor more robust to such errors in the future, and a tiny bit
faster since context creation is skipped.
Pull Request: https://projects.blender.org/blender/blender/pulls/122420
Remove the button "Update Views" that requires the user to update visible views manually. This is now consistent with the automatic update of compositor tree, when views are added or deleted, see #120685.
The patch also addresses #109866 (not really a fix since behavior in that bug report is intentional).
Pull Request: https://projects.blender.org/blender/blender/pulls/122290
This adds support for renaming some sockets in the node UI directly by Ctrl+Clicking
on them. This is sometimes more convenient than going to the sidebar. It affects the
Menu Switch and Bake node as well as the Simulation and Repeat zone.
Some related notes:
* The Group Input and Group Output node are not yet supported, because it currently
breaks the right-alignment on the Group Input node. I couldn't find a workaround for
this yet.
* Double-clicking on the socket name does not trigger renaming yet. This seems to
be a deeper issue in the interface code.
* The highlighting when hovering over sockets that can be renamed is very dim
making it hard to see. Alternatives like drawing a box around the label when hovering
it (like in list views) have been discussed but seem to be much more difficult to get to work.
Despite these limitations, it seems reasonable to add this already, as it shouldn't affect
anyone negatively. The nodes still look like before.
Co-authored-by: Hans Goudey <hans@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/121945
This improves working with viewer nodes in geometry and compositor nodes.
Previously, the viewer node would typically stay at the position where it was first
inserted which leads to very long links in many cases. Now the viewer node
automatically moves to the place where the user ctrl+shift+clicked to view data.
The viewer is placed slightly to the right and top of the current node. It is moved
up a bit, so that it does not get in the way as quickly when the user wants to add
another new node. Furthermore, the viewer node position is chosen so that it
does not intersect with other nodes.
In the future we could implement animating the node position so that it slowly
transitions to it's new places.
Pull Request: https://projects.blender.org/blender/blender/pulls/121951
Volumes and grids were not yet handled by the Geometry Nodes value
logging system. This patch adds basic information (number of grids)
to the value logger and node tooltips.
Pull Request: https://projects.blender.org/blender/blender/pulls/121622
This patch adds support for timing GPU compositor executions. This was
previously not possible since there was no mechanism to measure GPU
calls, which is still the case. However, since 2cf8b5c4e1, we now flush
GPU calls immediately for interactive editing, so we can now measure the
GPU evaluation on the host, which is not a very accurate method, but it
is better than having no timing information. Therefore, timing is only
implemented for interactive editing.
This is different from the CPU implementation in that it measures the
total evaluation time, including any preprocessing of the inputs like
implicit type conversion as well as things like previews.
The profiling implementation was moved to the realtime compositor since
the compositor module is optional.
Pull Request: https://projects.blender.org/blender/blender/pulls/122230
These popups had refreshing enabled, but the callback used for
refreshing would access a likely dangling operator pointer. One case can
use the operator-type pointer instead, in the other case disable
refreshing altogether. Also see 8ea79dc3a7.
Since 2fbf206491 it's possible to store named strings in context, rather
than having to wrap them in RNA pointers. Here this can avoid some
boilerplate code.
After this the `AssetCatalogPath` RNA struct should be unused. Might
be better to remove it in 5.0 only though, since it's part of the API.
Added to #110461.
Pull Request: https://projects.blender.org/blender/blender/pulls/122331
