When transforming multiple strips to limits of sequencer timeline they get
squashed into one channel.
Store selection minimum and maximum channel in TransSeq and limit
transformation so no strip can be transformed beyond timeline boundary.
Reviewed By: Sergey, mano-wii
Differential Revision: https://developer.blender.org/D10013
Move `eUndoStepDir` to `BKE_undo_system.h` and use its values
everywhere.
Note that this also introduce the `STEP_INVALID` value in that enum.
Finally, kept the matching struct members in some lower-level readfile
code as an `int` to avoid having to include `BKE_undo_system.h` in a lot
of unrelated files.
No need to show certain operators when they have no functionality.
For example, when adding a library override from the outliner menu, there should only be an option to add one (i.e. reset, delete, resync operators not relevant for objects without library override).
Reviewed By: mont29
Differential Revision: https://developer.blender.org/D10301
The rotation direction was flipped recently.
This meant that rotation on a single axis gave negative results compared
with previous Blender releases.
This partially reverts a9b53daf23.
Differential Revision: https://developer.blender.org/D10299
**Problem**:
Translating a strip will truncate it when next to a transition.
**Solution**:
The code only accounted for the prev/next strip for whether it exceeds.
When it was a transition, the exceed logic fails. Now, we use the
nearest non-transition strip instead.
Reviewed By: sybren, #animation_rigging
Differential Revision: https://developer.blender.org/D10083
Dyntopo does not have Face Sets implemented yet, so the entire mesh is
considered a single Face Set. In that case, the check unique face set
function should always return true.
Reviewed By: JacquesLucke
Maniphest Tasks: T85230
Differential Revision: https://developer.blender.org/D10259
This ensured that the sculpt mode deformation is flushed to the mesh
datablock after leaving sculpt mode, so it can be duplicated and
extracted correctly.
Reviewed By: JacquesLucke
Maniphest Tasks: T85136
Differential Revision: https://developer.blender.org/D10254
A missing flush of the deformed PBVH coordinates to the shape key.
Reviewed By: JacquesLucke
Maniphest Tasks: T84370
Differential Revision: https://developer.blender.org/D10174
The edge preview data of the boundary needs to be freed with the
boundary data created for the brush. Also, all data for the
ScultpSession preview that is used to render the cursor needs to be
freed with the ##SculptSession##.
Found by Jacques Lucke
Reviewed By: JacquesLucke
Differential Revision: https://developer.blender.org/D10173
The white rotation Gizmo should always use the View orientation.
Before, if you set an orientation for the gizmo other than the default,
that gizmo would behave like the contraint Z Gizmo.
This is an old bug (strange not to have been reported before).
To define the direction of rotation, the View Vector is used.
However, only the projection matrix was being considered, but in
perspective mode, the position of the pivot also matters.
Normally sockets only have one input link. This commit adds the back-end
changes needed to use multiple input links per socket.
Multi-input sockets can be defined with a new flag in `bNodeSocketType`.
The changes necessary to make the sockets work in the geometry nodes
evaluator are generalizing input socket values as a vector of values,
and supporting this in the derived node tree structure.
This patch should contain no functional changes. Two upcoming patches
will use this system for the "Join Geometry" node and expose link picking
and updated display in the UI: D10069 and D10181.
Reviewed By: Jacques Lucke, Hans Goudey
Differential Revision: https://developer.blender.org/D10067
Implements a node to get collection objects.
These objects are then passed along as instances in the node tree.
Follow up tasks:
Multiple nodes does not support instancing yet: T85159
Changing collection offset does not trigger a refresh: T85274
Reviewed By: Jacques, Dalai, Hans
Differential Revision: http://developer.blender.org/D10151
The 'ui_pan_to_scroll' uses 'WM_event_absolute_delta_y'. For scrolling the List View
we need to invert the direction to respect "natural scroll direction" system preferences.
Differential Revision: https://developer.blender.org/D10291
Now we only use 'undo' or 'redo' in function names when the direction is
clear (and we assert about it). Otherwise, use 'load' instead.
When passing an undo step to BKE functions, consider calling code has
done its work and is actually passing the target step (i.e. the final
step intended to be loaded), instead of assuming we have to load the
step before/after it.
Also deduplicate and simplify a lot of core undo code in BKE, now
`BKE_undosys_step_load_data_ex` is the only place where all the complex
logic of undo/redo loop (to handle several steps in a row) is placed. We also
only use a single loop there, instead of the two existing ones in
previous code.
Note that here we consider that when we are loading the current active
step, we are undoing. This makes sense in that doing so //may// undo
some changes (ideally it should never do so), but should never, ever
redo anything.
`BKE_undosys_step_load_from_index` also gets heavily simplified, it's
not basically a shallow wrapper around
`BKE_undosys_step_load_from_index`.
And some general update of variable names, commenting, etc.
Part of T83806.
Differential Revision: https://developer.blender.org/D10227
When a searchbox-button for string properties (e.g. to reference a vertex
group) was created, and a value was set, the tooltip timer would constantly get
cancelled.
That was because the code to validate the current value
(`ui_but_search_refresh()` - early exists for non-string properties) would call
a helper function to update the search results (`ui_searchbox_update_fn()`),
which always reset tooltips. Resetting them in the helper makes sense, for as
long as the searchbox is open. But while it's not, and we just validate the
current value, it shouldn't do this.
This was also noticable in the output settings of dynamic paint, and probably a
number of other cases (especially with script UIs which tend to use string
properties more often).
Likely caused by de53c039ad.
This lead to wrong, stretched UVs regardless of the ON/OFF state of
"Correct Aspect" option (some code in the operator respected this
setting properly, whereas it was hardcoded in another part).
Before rB9296ba867462, `uvedit_pack_islands_multi` was always called
with `correct_aspect` = false for the UnwrapOptions.
After rB9296ba867462, `ED_uvedit_pack_islands_multi` was always called
with `correct_aspect` = true for the UVPackIsland_Params.
Both seem wrong [in that they do not take the operator setting into
account]. Now respect that setting [same as the following
`uv_map_clip_correct_multi` does as well btw.]
Now results match 2.90 [where this was still python] perfectly.
Maniphest Tasks: T85194
Differential Revision: https://developer.blender.org/D10246
Drawing on e.g. the X-Z plane was broken due to an earlier
commit (rBef28da262342). This was causing the projection when drawing
on an axis plane to fail.
The fix checks that the user is in view plane projection mode.
Reviewed By: antoniov
Maniphest Tasks: T85203
Differential Revision: https://developer.blender.org/D10252
Some orientations are not possible to be calculated for certain scenes.
In these cases, others are chosen and informed by the operator.
However, the user may prefer that the chosen one be displayed (even if it
is not actually used).
This corresponds to older versions of Blender.
This could happen with files saved before ef4aa42ea4, so before global areas
were written to .blend files.
We would just always add the top- and status-bar, even though the screen wasn't
supposed to have them. I'm not entirely sure what caused the further issues
observed there, most code should probably handle the case fine still. But
apparently something didn't.
Steps to reproduce were:
* Open Blender from before ef4aa42ea4 (e.g 2.91 release)
* In 3D View, View > Area > Toggle Fullscreen Area
* Save the file
* Open the saved file (can be in newer version too)
The fullscreen is corrupt now, especially noticable after duplicating the
workspace.
This solution replaces {rBf9e994d0f463}.
That commit created an inverted orientation matrix but the 'Align to
Transform Orientation' operator doesn't work well with inverted matrices.
This new solution makes the rotate operator use the negative vector of the
axis.
This reverts commit f9e994d0f4.
And fixes T85227.
That commit created an inverted orientation matrix but the 'Align to
Transform Orientation' operator doesn't work well with inverted matrices.
