This is useful to save time manually averaging many timing results.
The minimum is included because often it can be more stable than an
average, and it can help to expose calls from other contexts with lower
times that would make the average useless.
Differential Revision: https://developer.blender.org/D14417
In a test file from T96282, this commit reduces the runtime of the
delete geometry node from 82 ms to 23 ms, a 3.6x improvement.
Writing to vertex groups in other cases should be faster too.
The largest improvement comes from not writing a new weight
of zero if the vertex is not in the group. This mirrors the behavior
of custom data interpolation in `layerInterp_mdeformvert`.
Other improvements come from using `set_all` for writing
output attributes and implementing that method for vertex groups.
I also implemented `materialize` methods. Though I didn't obverse
an improvement from this, I think it's best to remove virtual method
call overhead where it's simple to do so.
The test file for the delete geometry node needs to be updated.
These methods could be parallelized too, but better to do that later.
Differential Revision: https://developer.blender.org/D14420
Rename "size" variables and functions to use "num" instead,
based on T85728 (though this doesn't apply to simple C++
containers, it applies here). Rename "range" to "points" in
some functions, so be more specific.
Differential Revision: https://developer.blender.org/D14431
There are some filenames where the UDIM pattern guessing would fail
unnecessarily. The user can fix these up afterwards but it would be
nicer if they would detect properly in the first place.
Examples:
`test.1001.ver0023.png` would guess wrong since it uses the image
sequence detection code which finds the first sequence from the end. It
would guess `filename.1001.ver<UDIM>.png`
`uv-test.u1_v2.png` would fail detection due to a bug in the processing.
Make this much more reliable and add tests for the most important tile
related get/set/detection functions.
Differential Revision: https://developer.blender.org/D14320
Basic testing on windows only so far. Will need some testing on Linux as well
when the Linux enablement patch is ready.
Does not enable Vega APUs yet (which would be gfx902 or gfx90c).
Differential Revision: https://developer.blender.org/D14432
For render image buffers to be acquired, a lock must be provided. Also
fixed wrong usage of release, it must always be called regardless if the
returned image buffer is NULL.
Explicit template specialization has to happen outside of class
definition (some compilers are more lenient). Since it is not possible to
specialize the method without also specializing the enclosing class for
all of its possible types, the method is moved outside of the class, and
specialized there.
This adds a const qualifier to some code path in the Alembic and USD
importers. More could be added elsewhere. This change is done as it will
be required when GeometrySets are supported and helps keeping diff noise
in the patch to a bare minimum.
ViewMapIO.h is only included in Controller.cpp init_options().
However, g_models_path and g_flags set here are never used elsewhere.
Therefore, ViewMapIO files can be deleted without affecting anything.
Differential Revision: https://developer.blender.org/D14423
Use templates to optimize the CPU texture sampler to interpolate using
float for single component datatypes instead of using float4 for all types.
Differential Revision: https://developer.blender.org/D14424
New supported features:
* 3D/spherical brush that samples a good position on the curves.
* Falloff.
The custom falloff curve mapping is not yet available in the ui because that
requires some more ui reorganization. This is better done when we have
a better understanding of what settings we need exactly.
Currently, the depth of the 3d brush is only sampled once per stroke, when
first pressing LMB. Sometimes it is expected that the depth of the brush can
change within a single brush. However, implementing that in a good way
is not straight forward and might need additional options. Therefore that
will be handled separately. Some experimentation results are in D14376.
Ref T96445.
Differential Revision: https://developer.blender.org/D14376
rBc1909770e7f192574ea62449dd14b4254637e604 introduced "PXR_LIB_PREFIX" for building the
dependencies, so only makes sense to use the same name in the Hydra render delegate CMake too
This patch adds a Hydra render delegate to Cycles, allowing Cycles to be used for rendering
in applications that provide a Hydra viewport. The implementation was written from scratch
against Cycles X, for integration into the Blender repository to make it possible to continue
developing it in step with the rest of Cycles. For this purpose it follows the style of the rest of
the Cycles code and can be built with a CMake option
(`WITH_CYCLES_HYDRA_RENDER_DELEGATE=1`) similar to the existing standalone version
of Cycles.
Since Hydra render delegates need to be built against the exact USD version and other
dependencies as the target application is using, this is intended to be built separate from
Blender (`WITH_BLENDER=0` CMake option) and with support for library versions different
from what Blender is using. As such the CMake build scripts for Windows had to be modified
slightly, so that the Cycles Hydra render delegate can e.g. be built with MSVC 2017 again
even though Blender requires MSVC 2019 now, and it's possible to specify custom paths to
the USD SDK etc. The codebase supports building against the latest USD release 22.03 and all
the way back to USD 20.08 (with some limitations).
Reviewed By: brecht, LazyDodo
Differential Revision: https://developer.blender.org/D14398
If the `Automatic Constraint` modifier was activated while an axis
constraint was already set, the orientation used would be the default
orientation of the mode and not that of the scene.
This was because the `initSelectConstraint` function was not called in
this case and the `Automatic Constraint` mode was enabled by other
indirect means
So the solution is to call `initSelectConstraint` in either case and
remove these "indirect means" of enabling `Automatic Constraint`.
This moves `MOD_meshsequencecache.c` to C++ and fixes compile warnings
introduced from the change. This uses C++ style casts, as well as
`nullptr` instead of `NULL`.
This will allow to output `GeometrySets` from the modifier, which is C++.
Differential Revision: https://developer.blender.org/D13662
This enables the configuration to specify aliases for compatibility with other
configurations.
When a colorspace name is saved in a.blend, that is the alias of a colorspace
in the current configuration, it will show the main colorspace from the
configuration in the user interface and Python API instead.
Loading & saving the .blend file does not make any changes to the stored name,
so as to not make hidden modifications. Only when setting the property again
will the alias name be overwritten by the main colorspace name.
Fixes T96049
Differential Revision: https://developer.blender.org/D14419
The Output Properties > Output panel now has a Color Management subpanel to
override scene settings. When set to Override instead of Follow Scene, there
are settings to:
* For OpenEXR, choose a (linear) colorspace for RGBA passes
* For other file formats, use different display/view/look/exposure/gamma
These settings affect animation render output, image save of renders and the
compositor file output node. Additionally, the image save operator and
compositor file output nodes also support overriding color management.
Includes some layout changes to the relevant panels to accomdate the new
settings and to improve consistency. Ideally subpanels would be used to better
organize these settings, however nodes and operators don't currently support
creating subpanels.
Differential Revision: https://developer.blender.org/D14402
When using GradingPrimaryTransform the generated GLSL code fails to compile. The actual issue is
inside OCIO (https://github.com/AcademySoftwareFoundation/OpenColorIO/issues/1603).
The reason is that unset clamping values are rendered out as `inf`, which isn't recognizable
by GLSL.
The issue is worked around by defining a default for `inf`.
Reviewed By: brecht
Maniphest Tasks: T96502
Differential Revision: https://developer.blender.org/D14425
When converting ghost keys to Blender's event system:
- All keys that aren't part of the GHOST_TKey enum map to EVENT_NONE
(ignored), note that it's an internal error if the value of key isn't
a known value.
- Modify the switch statement so any missing members of GHOST_TKey
warn at compile time (GCC & Clang only).
- GHOST_kKeyUnknown maps to EVT_UNKNOWNKEY.
We could ignore this key, changing can be evaluated separately.
Avoid adding events with their type set to EVENT_NONE as these
can't be categorized usefully (keyboard/mouse/NDOF ... etc),
and add an extra case that needs to be accounted for.
Adding these events seems to be an unintentional change from [0],
these keys used to be ignored in 2.4x.
[0]: a1c8543f2a
This reverts commit e55f4657f7.
It's not intended to support assigning shortcuts to this operator,
which could only work for built-in keying sets caused warnings to be
reported warnings when exporting key-maps.
Prefer D14289, preventing users running into this problem to begin with.
- Follow the same conventions as the 3D viewport for UV selection
(using SelectPick_Params internally).
- Use WM_operator_properties_mouse_select for selection properties.
Vertices were not drawn properly as the logic for mapped mesh was used
in the BMesh case.
Edge display would ignore subdivided edges which would come from coarse
edges when setting display flags.
The checks for calling outliner flushing didn't account for
entering pose mode for the first time or that pose-bone selection
can also change the object selection.
Resolve by recording what changed and refresh accordingly.
Also de-duplicate calls to DEG_id_tag_update.
- Document parameters.
- Add code-comments.
- Remove some historic/unhelpful code-comments.
- Rename argument names that were ambiguous
(object was a boolean for e.g.).
- Move `gpu` picking into an allocated struct which is only
allocated & used when using GPU picking.
- Move variable declarations after menu picking has been handled.
