In a test file from T96282, this commit reduces the runtime of the
delete geometry node from 82 ms to 23 ms, a 3.6x improvement.
Writing to vertex groups in other cases should be faster too.
The largest improvement comes from not writing a new weight
of zero if the vertex is not in the group. This mirrors the behavior
of custom data interpolation in `layerInterp_mdeformvert`.
Other improvements come from using `set_all` for writing
output attributes and implementing that method for vertex groups.
I also implemented `materialize` methods. Though I didn't obverse
an improvement from this, I think it's best to remove virtual method
call overhead where it's simple to do so.
The test file for the delete geometry node needs to be updated.
These methods could be parallelized too, but better to do that later.
Differential Revision: https://developer.blender.org/D14420
Rename "size" variables and functions to use "num" instead,
based on T85728 (though this doesn't apply to simple C++
containers, it applies here). Rename "range" to "points" in
some functions, so be more specific.
Differential Revision: https://developer.blender.org/D14431
There are some filenames where the UDIM pattern guessing would fail
unnecessarily. The user can fix these up afterwards but it would be
nicer if they would detect properly in the first place.
Examples:
`test.1001.ver0023.png` would guess wrong since it uses the image
sequence detection code which finds the first sequence from the end. It
would guess `filename.1001.ver<UDIM>.png`
`uv-test.u1_v2.png` would fail detection due to a bug in the processing.
Make this much more reliable and add tests for the most important tile
related get/set/detection functions.
Differential Revision: https://developer.blender.org/D14320
For render image buffers to be acquired, a lock must be provided. Also
fixed wrong usage of release, it must always be called regardless if the
returned image buffer is NULL.
The Output Properties > Output panel now has a Color Management subpanel to
override scene settings. When set to Override instead of Follow Scene, there
are settings to:
* For OpenEXR, choose a (linear) colorspace for RGBA passes
* For other file formats, use different display/view/look/exposure/gamma
These settings affect animation render output, image save of renders and the
compositor file output node. Additionally, the image save operator and
compositor file output nodes also support overriding color management.
Includes some layout changes to the relevant panels to accomdate the new
settings and to improve consistency. Ideally subpanels would be used to better
organize these settings, however nodes and operators don't currently support
creating subpanels.
Differential Revision: https://developer.blender.org/D14402
Split retrieval of translated text for the "invalid" messages for NURBS
curves from the actual calculation, which is a lower-level function.
Also fixes an issue where "At least two points required" would always
display in the "Active Spline" panel.
Differential Revision: https://developer.blender.org/D14315
A mistake in the mesh normal refactor caused the wrong mesh to
be used when calculating normals with a shape key's deformation.
This commit fixes the normal calculation by using the correct mesh,
with just adjusted vertex positions, and calculating the results
directly into the result arrays when possible. This completely avoids
the need to make a local copy of the mesh, which makes sense,
since the only thing that changes is the vertex positions.
Differential Revision: https://developer.blender.org/D14317
Currently there is a "calc_face_normal" argument to mesh to bmesh
conversion, but vertex normals had always implicitly inherited whatever
dirty state the mesh input's vertex normals were in. Probably they were
most often assumed to not be dirty, but this was never really correct in
the general case.
Ever since the refactor to move vertex normals out of mesh vertices,
cfa53e0fbe, the copying logic has been explicit: copy the
normals when they are not dirty. But it turns out that more control is
needed, and sometimes normals should be calculated for the resulting
BMesh.
This commit adds an option to the conversion to calculate vertex
normals, true by default. In almost all places except the decimate
and edge split modifiers, I just copied the value of the
"calc_face_normals" argument.
Differential Revision: https://developer.blender.org/D14406
Make a copy of ImageFormatData that contains the effective color management
settings, and pass that along to the various functions. This will make it
possible to add more complex logic later.
For compositing nodes, passing along view and display settings through
many functions made it harder to add additional settings, so just get those
from the scene now.
Differential Revision: https://developer.blender.org/D14401
This adds a new Add brush for the new curves object type in sculpt mode.
The brush is used to insert new curves (typically hair) on the surface object.
Supported features:
* Add single curve exactly at the cursor position when `Add Amount` is 1.
* Front faces only.
* Independent interpolate shape and interpolate length settings.
* Smooth and flat shading affects curve shape interpolation.
* Spherical and projection brush.
This also adds the `surface_triangle_index` and `surface_triangle_coordinate`
attributes. Those store information about what position on the surface each
added curve is attached to:
* `surface_triangle_index` (`int`): Index of the internal triangle that a curve
is attached to. `-1` when the curve is not attached to the surface.
* `surface_triangle_coordinate` (`float2`): First two numbers of a barycentric
coordinate that reference a specific position within the triangle.
Ref T96444.
Differential Revision: https://developer.blender.org/D14340
Also fixes missing code to read/write/free/copy color management settings
in various places. This can't be set through the UI currently, but still
should be handled consistently.
Previously, the conversion was done manually for a fixed set of types.
Now, there is a more general utility that can be used in other contexts
(outside of geometry nodes attribute processing) as well.
As the grease pencil simplify is a subotion of general simplify, if the general switch is disabled, the grease pencil simplify must be disabled too.
This patch also disable the UI panel.
Create a function on CurvesGeometry that can also be used for an edit
mode operator in the future. Dealing with CustomData directly means the
code is a bit more verbose than would be ideal, but this would be a
simple thing to clean up in the future if we get an attribute API here.
Also change the reverse node to first work on a read-only geometry
component, and only get write access if there is a curve selected.
Differential Revision: https://developer.blender.org/D14375
A mistake in 8538c69921. The offsets include the segment at the
corresponding index, but the evaluated offset calculation was adjusting
the offset for the second to last segment.
Make the new curves' translate and transform functions also affect
the handle position attributes.
Differential Revision: https://developer.blender.org/D14372
Caused by rB43bc494892c3, moving this 'new id' relink to generic
remapping code added the over-head of proper, generic post-processing,
compared to the special-cases previous code was only designed to handle.
Fortunately with recent 'multi-remapping' work we can easily rewrite
that new id relink code to use the multi-remapping approach too.
No behavioral change is expected from this commit, besides the improved
performances (essentially restored to what they where before
rB43bc494892c3).
Change the sample mode to don't duplicate the last vertex of the
stroke and instead use the cyclic flag to close previously cyclic
strokes. This is necessary for the following modifiers.
Reviewed By: NicksBest
Differential Revision: http://developer.blender.org/D14359
The previous fix including `<algorithm>` was an improvement
but not the actual error, which appears to be that `int64_t` is
long long int on one platform but just long int on another.
The fix includes the template argument directly.
This patch adds evaluation for NURBS, Bezier, and Catmull Rom
curves for the new `Curves` data-block. The main difference from
the code in `BKE_spline.hh` is that the functionality is not
encapsulated in classes. Instead, each function has arguments
for all of the information it needs. This makes the code more
reusable and removes a bunch of unnecessary complications
for keeping track of state.
NURBS and Bezier evaluation works the same way as existing code.
The Catmull Rom implementation is new, with the basis function
based on Cycles code. All three types have some basic tests.
For NURBS and Catmull Rom curves, evaluating positions is the
same as any generic attribute, so it's implemented by the generic
interpolation to evaluated points. Bezier curves are a bit special,
because the "handle" control points are stored in a separate attribute.
This patch doesn't include generic interpolation to evaluated points
for Bezier curves.
Ref T95942
Differential Revision: https://developer.blender.org/D14284
Similar to other changes to ID remapping, gives huge speedups in some
cases, like certain types of liboverride creation.
Case from {T96092} goes from 1725 seconds (almost 30 minutes) to 45
seconds to generate the liboverride, on my machine.
Reviewed By: jbakker
Maniphest Tasks: T96092
Differential Revision: https://developer.blender.org/D14240
This commit removes the implementations of legacy nodes,
their type definitions, and related code that becomes unused.
Now that we have two releases that included the legacy nodes,
there is not much reason to include them still. Removing the
code means refactoring will be easier, and old code doesn't
have to be tested and maintained.
After this commit, the legacy nodes will be undefined in the UI,
so 3.0 or 3.1 should be used to convert files to the fields system.
The net change is 12184 lines removed!
The tooltip for legacy nodes mentioned that we would remove
them before 4.0, which was purposefully a bit vague to allow
us this flexibility. In a poll in a devtalk post showed that the
majority of people were okay with removing the nodes.
https://devtalk.blender.org/t/geometry-nodes-backward-compatibility-poll/20199
Differential Revision: https://developer.blender.org/D14353
Volatile fields were introduced to the RenderResult struct years ago[1].
However, volatile is most likely not doing what it was intended to do
in this instance, and is problematic when moving files to c++ (see
discussion from D13962). There are complex rules around what happens to
these fields but none of them guarantee what the above commit alluded to.
This patch drops the volatile and cleans up the APIs surrounding it.
[1] rB7930c40051ef1b1a26140629cf1299aa89eed859
Passing on all platforms:
https://builder.blender.org/admin/#/builders/18/builds/338
Differential Revision: https://developer.blender.org/D14298
Some old platforms and drivers have limited amount of SSBO binding per
compute shader. This disables GPU subdivision if we cannot possibly
bind all required buffers within this limit.
For now the maximum number of buffers used by the GPU code is hardcoded,
but will be programmatically detected when shader creation is automated.
Ref D14337
The performance issue was noticeable when tracking a lot of tracks
which are using keyframe pattern matching. What was happening is that
at some cache gets filled in and the furthest away frame gets removed
from the cache: the frame at marker's keyframe gets removed and needs
to be re-read from disk on the next tracking step.
This change makes it so frames at markers' keyframes are not removed
from cache during tracking.
Steps to easily reproduce:
- Set cache size to 512 Mb.
- Open image sequence in clip editor
- Detect features
- Track all markers
Originally was reported by Rik, thanks!
This commit adds three nodes:
- `Remove Attribute`: Removes an attribute with the given name
- `Named Attribute`: A field input node
- `Store Named Attribute`: Puts results of a field in a named attribute
They are added behind a new experimental feature flag, because further
development of attribute search and name dependency visualization will
happen as separate steps.
Ref T91742
Differential Revision: https://developer.blender.org/D12685
