Customizable highlighting of editor edges that can be used to help
differentiate between areas, indicate active area, and/or help users
with visual impairment. Can be completely removed as well. This
replaces the active area header highlighting, which doesn't work for
transparent headers.
Pull Request: https://projects.blender.org/blender/blender/pulls/116684
While we continue to improve our tooltips, this PR appends a period to
descriptions if it does not already end in punctuation (.!?), or does
not contain a bullet character. This only does so under the same
circumstances as in earlier code, removed in #125460.
Pull Request: https://projects.blender.org/blender/blender/pulls/128097
This adds an eyedropper button to properties where you can choose a bone.
Clicking it activates the modal operation and you can pick:
* Bones from the Outliner
* Bones from the 3D Viewport if the Armature is in Pose Mode or Edit Mode
## Limitation
Picking from the 3D viewport while in Object Mode doesn't work due to technical reasons.
The selection buffer is only filled with pose bones if the armature is in pose mode.
Using the picker while in object mode gives you the Armature object, not its bones.
So you cannot use the bone picker to constrain an object to a bone.
UNLESS you pin the panel with the object, go to pose mode and then pick.
There is a warning printed for those cases to tell the user why this hasn't worked.
Pull Request: https://projects.blender.org/blender/blender/pulls/121523
Refactoring of the color picker popup. This simplifies code, removes
cruft, and adds new features. The Hex input is removed from its own
tab and placed at the bottom of the layout. The picker circle is made
just a bit smaller. "#" added to the hex values.
Pull Request: https://projects.blender.org/blender/blender/pulls/125675
This adds a new type of zone to Geometry Nodes that allows executing some nodes
for each element in a geometry.
## Features
* The `Selection` input allows iterating over a subset of elements on the set
domain.
* Fields passed into the input node are available as single values inside of the
zone.
* The input geometry can be split up into separate (completely independent)
geometries for each element (on all domains except face corner).
* New attributes can be created on the input geometry by outputting a single
value from each iteration.
* New geometries can be generated in each iteration.
* All of these geometries are joined to form the final output.
* Attributes from the input geometry are propagated to the output
geometries.
## Evaluation
The evaluation strategy is similar to the one used for repeat zones. Namely, it
dynamically builds a `lazy_function::Graph` once it knows how many iterations
are necessary. It contains a separate node for each iteration. The inputs for
each iteration are hardcoded into the graph. The outputs of each iteration a
passed to a separate lazy-function that reduces all the values down to the final
outputs. This final output can have a huge number of inputs and that is not
ideal for multi-threading yet, but that can still be improved in the future.
## Performance
There is a non-neglilible amount of overhead for each iteration. The overhead is
way larger than the per-element overhead when just doing field evaluation.
Therefore, normal field evaluation should be preferred when possible. That can
partially still be optimized if there is only some number crunching going on in
the zone but that optimization is not implemented yet.
However, processing many small geometries (e.g. each hair of a character
separately) will likely **always be slower** than working on fewer larger
geoemtries. The additional flexibility you get by processing each element
separately comes at the cost that Blender can't optimize the operation as well.
For node groups that need to handle lots of geometry elements, we recommend
trying to design the node setup so that iteration over tiny sub-geometries is
not required.
An opposite point is true as well though. It can be faster to process more
medium sized geometries in parallel than fewer very large geometries because of
more multi-threading opportunities. The exact threshold between tiny, medium and
large geometries depends on a lot of factors though.
Overall, this initial version of the new zone does not implement all
optimization opportunities yet, but the points mentioned above will still hold
true later.
Pull Request: https://projects.blender.org/blender/blender/pulls/127331
lib override and add asset operation appears in nested context menu.
They are incorrectly exposed when right clicked on an operator in
context menu. So don't expose then when opening nested context menu on
operator.
Pull Request: https://projects.blender.org/blender/blender/pulls/126927
We already have the `description` property on panels but are currently not
displaying it when hovering over a panel header. With this patch, the
descriptions will be shown in group nodes as well as the geometry nodes
modifier.
I had to do two lower level changes for layout panels because it didn't work
with tooltips properly.
* Tooltips make the label in the panel header interactive, but clicking to
open/close the panel should still work.
* The tooltip should disappear when clicking on the header. This is consistent
with tooltips in other places.
Pull Request: https://projects.blender.org/blender/blender/pulls/127852
This commit adds low-level logic in BKE to support three behaviors in
case of name conflict when renaming an ID:
1. Always tweak new name of the renamed ID (never modify the other ID
name).
2. Always set requested name in renamed ID, modifying as needed the
other ID name.
3. Only modify the other ID name if it shares the same root name with the
current renamed ID's name.
It also adds quite some changes to IDTemplate, Outliner code, and
RNA-defined UILayout code, and the lower-level UI button API, to allow
for the new behavior defined in the design (i.e. option three from above list).
When renaming from the UI either 'fails' (falls back to adjusted name) or forces
renaming another ID, an INFO report is displayed.
This commit also fixes several issues in existing code, especially
regarding undo handling in rename operations (which could lead to saving
the wrong name in undo step, and/or over-generating undo steps).
API wise, the bahavior when directly assigning a name to the `ID.name`
property remains unchanged (option one from the list above). But a new
API call `ID.rename` has been added, which offers all three behaviors.
Unittests were added to cover the new implemented behaviors (both at
BKE level, and the RNA/Py API).
This commit implements #119139 design.
Pull Request: https://projects.blender.org/blender/blender/pulls/126996
The function would return two very different layouts in different code
paths, making it not clear to the caller what to expect. For one code
path the return value was rather useless, and in fact unused, so I was
able to just remove this. Also clarified behavior and return values in
the function API comment.
Since 5bcb0c9935, `uiLayout.template_ID()` already supports passing a label, in
which case the `uiLayout.use_property_split` would be respected. This makes the
template fit nicely with the surrounding layout, where buttons might have a
label split on the left, and a decorator button on the right.
This change brings the same to `uiLayout.template_search()`, plus makes it
respect `uiLayout.use_property_decorate`
Pull Request: https://projects.blender.org/blender/blender/pulls/127751
Replace uses of WM_window_native_pixel_x,y with
WM_window_native_pixel_size() which returns an int2 for convenience
and avoids an unnecessary call to GHOST_GetNativePixelSize(..).
Avoid setting default cursor while number dragging. But always reset
cursor in title area if even there is a button in that space. Decrease
the title height slightly to work with title-less popups.
Pull Request: https://projects.blender.org/blender/blender/pulls/127598
Avoid truncation errors causing unneccessary resizing by passing floats
to UI_block_translate. That function translates block and button rects
which are floats.
Pull Request: https://projects.blender.org/blender/blender/pulls/127505
The single characters "\" could not be used for filtering
because it was treated as an escape characters.
Although "\\" could be used to match "\".
Disable escape character behavior as this mostly makes sense for
matching file-names for shell input.
Previously, mapping old to new items was O(n^2) because each new item was
compared to all old items until the corresponding one was found. This patch
introduces a pre-filter to the old elements that have to be checked. Instead of
comparing all old items, only the ones with the same label are compared now.
This reduces the time complexity to O(n), making the tree view much more
usable with many items.
For an NLA strip to use a slotted Action, it needs to specify which slot
to use in that action. This is now handled by two new properties on the
strip in DNA & RNA: `action_slot_handle` and `action_slot_name`.
These serve the same purpose as their counterparts on the `AnimData`
struct.
Note that this commit does NOT add NLA evaluation support for slotted
Actions. It merely allows assigning them. Evaluation, tweak mode
support, etc. will be implemented in future commits.
Pull Request: https://projects.blender.org/blender/blender/pulls/127359
PR ##127465 accidentally removed a check for is_floating, which means
that you get a drag cursor near the top of dropdown menus. This fixes
that dumb mistake.
Pull Request: https://projects.blender.org/blender/blender/pulls/127472
Some popup menus have content at the very top, within the title bounds.
In this case don't show the drag cursor if there is a button under the
mouse location.
Pull Request: https://projects.blender.org/blender/blender/pulls/127465
The icons used for the status bar event icons were recently sorted,
resulting in a reversal of the filled/unfilled pairs. This PR makes
them not rely on the order. This also improves the centering of the
text in the buttons. The complaint about the word "Space" is because
this word has a descender. This requires using BLF_boundbox, rather
than BLF_width_and_height to get the position relative to the baseline.
Pull Request: https://projects.blender.org/blender/blender/pulls/127376
Mouse cursor changes when hovering at the top of popup blocks to
indicate that these can be dragged. On Mac this looks like a hand,
while for other platforms it is a drag cursor.
Pull Request: https://projects.blender.org/blender/blender/pulls/118358
This commit mainly replaces a lot of `memset(0)` by empty value
initialization of `PointerRNA` and related data.
It also moves a few remaining areas from C alloc/free to C++ new/delete
memory hanlding.
Part of the effort to make PointerRNA non-trivial (#122431).
The version text shown over the splash screen image needs to always be
white regardless of the theme. With "Blender Light" this text is black
and almost impossible to read. This PR adds the ability to set a
specific color for labels without icons and does so for the splash
screen.
Pull Request: https://projects.blender.org/blender/blender/pulls/126340
This commit essentially moves allocation of KeyMaps and Operators
PointerRNA data storage to use C++ new/delet, instead of C alloc/free.
Part of the effort to make PointerRNA non-trivial (#122431).
Pull Request: https://projects.blender.org/blender/blender/pulls/126935
