Regular rendering now works tiled, and supports save buffers to save memory
during render and cache render results.
Brick texture node by Thomas.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Brick_Texture
Image texture Blended Box Mapping.
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Nodes/Textures#Image_Texturehttp://mango.blender.org/production/blended_box/
Various bug fixes by Sergey and Campbell.
* Fix for reading freed memory in some node setups.
* Fix incorrect memory read when synchronizing mesh motion.
* Fix crash appearing when direct light usage is different on different layers.
* Fix for vector pass gives wrong result in some circumstances.
* Fix for wrong resolution used for rendering Render Layer node.
* Option to cancel rendering when doing initial synchronization.
* No more texture limit when using CPU render.
* Many fixes for new tiled rendering.
direct and indirect lighting differently. Rather than picking one light for each
point on the path, it now loops over all lights for direct lighting. For indirect
lighting it still picks a random light each time.
It gives control over the number of AA samples, and the number of Diffuse, Glossy,
Transmission, AO, Mesh Light, Background and Lamp samples for each AA sample.
This helps tuning render performance/noise and tends to give less noise for renders
dominated by direct lighting.
This sampling mode only works on the CPU, and still needs proper tile rendering
to show progress (will follow tommorrow or so), because each AA sample can be quite
slow now and so the delay between each update wil be too long.
For sample images see:
http://www.dalaifelinto.com/?p=399 (equisolid)
http://www.dalaifelinto.com/?p=389 (equidistant)
The 'use_panorama' option is now part of a new Camera type: 'Panorama'.
Created two other panorama cameras:
- Equisolid: most of lens in the market simulate this lens - e.g. Nikon, Canon, ...)
this works as a real lens up to an extent. The final result takes the
sensor dimensions into account also.
.:. to simulate a Nikon DX2S with a 10.5mm lens do:
sensor: 23.7 x 15.7
fisheye lens: 10.5
fisheye fov: 180
render dimensions: 4288 x 2848
- Equidistant: this is not a real lens model. Although the old equidistant lens simulate
this lens. The result is always as a circular fisheye that takes the whole sensor
(in other words, it doesn't take the sensor into consideration).
This is perfect for fulldomes ;)
For the UI we have 10 to 360 as soft values and 10 to 3600 as hard values (because we can).
Reference material:
http://www.hdrlabs.com/tutorials/downloads_files/HDRI%20for%20CGI.pdfhttp://www.bobatkins.com/photography/technical/field_of_view.html
Note, this is not a real simulation of the light path through the lens.
The ideal solution would be this:
https://graphics.stanford.edu/wikis/cs348b-11/Assignment3http://www.graphics.stanford.edu/papers/camera/
Thanks Brecht for the fix, suggestions and code review.
Kudos for the dome community for keeping me stimulated on the topic since 2009 ;)
Patch partly implemented during lab time at VisGraf, IMPA - Rio de Janeiro.
Most of the changes are related to adding support for motion data throughout
the code. There's some code for actual camera/object motion blur raytracing
but it's unfinished (it badly slows down the raytracing kernel even when the
option is turned off), so that code it disabled still.
Motion vector export from Blender tries to avoid computing derived meshes
when the mesh does not have a deforming modifier, and it also won't store
motion vectors for every vertex if only the object or camera is moving.
=== BVH build time optimizations ===
* BVH building was multithreaded. Not all building is multithreaded, packing
and the initial bounding/splitting is still single threaded, but recursive
splitting is, which was the main bottleneck.
* Object splitting now uses binning rather than sorting of all elements, using
code from the Embree raytracer from Intel.
http://software.intel.com/en-us/articles/embree-photo-realistic-ray-tracing-kernels/
* Other small changes to avoid allocations, pack memory more tightly, avoid
some unnecessary operations, ...
These optimizations do not work yet when Spatial Splits are enabled, for that
more work is needed. There's also other optimizations still needed, in
particular for the case of many low poly objects, the packing step and node
memory allocation.
BVH raytracing time should remain about the same, but BVH build time should be
significantly reduced, test here show speedup of about 5x to 10x on a dual core
and 5x to 25x on an 8-core machine, depending on the scene.
=== Threads ===
Centralized task scheduler for multithreading, which is basically the
CPU device threading code wrapped into something reusable.
Basic idea is that there is a single TaskScheduler that keeps a pool of threads,
one for each core. Other places in the code can then create a TaskPool that they
can drop Tasks in to be executed by the scheduler, and wait for them to complete
or cancel them early.
=== Normal ====
Added a Normal output to the texture coordinate node. This currently
gives the object space normal, which is the same under object animation.
In the future this might become a "generated" normal so it's also stable for
deforming objects, but for now it's already useful for non-deforming objects.
=== Render Layers ===
Per render layer Samples control, leaving it to 0 will use the common scene
setting.
Environment pass will now render environment even if film is set to transparent.
Exclude Layers" added. Scene layers (all object that influence the render,
directly or indirectly) are shared between all render layers. However sometimes
it's useful to leave out some object influence for a particular render layer.
That's what this option allows you to do.
=== Filter Glossy ===
When using a value higher than 0.0, this will blur glossy reflections after
blurry bounces, to reduce noise at the cost of accuracy. 1.0 is a good
starting value to tweak.
Some light paths have a low probability of being found while contributing much
light to the pixel. As a result these light paths will be found in some pixels
and not in others, causing fireflies. An example of such a difficult path might
be a small light that is causing a small specular highlight on a sharp glossy
material, which we are seeing through a rough glossy material. With path tracing
it is difficult to find the specular highlight, but if we increase the roughness
on the material the highlight gets bigger and softer, and so easier to find.
Often this blurring will be hardly noticeable, because we are seeing it through
a blurry material anyway, but there are also cases where this will lead to a
loss of detail in lighting.
but this makes it more reliable for now.
Also add an integrator "Clamp" option, to clamp very light samples to a maximum
value. This will reduce accuracy but may help reducing noise and speed up
convergence.
emitting objects or world lighting do not contribute to the shadow pass.
Consider this more as a pass useful for some compositing tricks, unlike
other lighting passes this pass can't be used to exactly reconstruct the
combined pass.
Currently supported passes:
* Combined, Z, Normal, Object Index, Material Index, Emission, Environment,
Diffuse/Glossy/Transmission x Direct/Indirect/Color
Not supported yet:
* UV, Vector, Mist
Only enabled for CPU devices at the moment, will do GPU tweaks tommorrow,
also for environment importance sampling.
Documentation:
http://wiki.blender.org/index.php/Doc:2.6/Manual/Render/Cycles/Passes
By default lighting from the world is computed solely with indirect light
sampling. However for more complex environment maps this can be too noisy, as
sampling the BSDF may not easily find the highlights in the environment map
image. By enabling this option, the world background will be sampled as a lamp,
with lighter parts automatically given more samples.
Map Resolution specifies the size of the importance map (res x res). Before
rendering starts, an importance map is generated by "baking" a grayscale image
from the world shader. This will then be used to determine which parts of the
background are light and so should receive more samples than darker parts.
Higher resolutions will result in more accurate sampling but take more setup
time and memory.
Patch by Mike Farnsworth, thanks!
disk to be reused by the next render.
This is useful for rendering animations where only the camera or materials change.
Note that saving the BVH to disk only to be removed for the next frame is slower
if this is not the case and the meshes do actually change.
For a render, it will save bvh files to the cache user directory, and remove all
cache files from other renders. The files are named using a MD5 hash based on the
mesh, to verify if the meshes are still the same.
The rendering device is now set in User Preferences > System, where you can
choose between OpenCL/CUDA and devices. Per scene you can then still choose
to use CPU or GPU rendering.
Load balancing still needs to be improved, now it just splits the entire
render in two, that will be done in a separate commit.
- rename 'bcycles' --> '_cycles', since this is the python convention when a py module uses a C module internally.
- use macros for returning None
- make with_osl an attribute rather then a function.
- changes methods METH_VARARGS --> METH_O when single args are used.
* Compile all of cycles with -ffast-math again
* Add scons compilation of cuda binaries, tested on mac/linux.
* Add UI option for supported/experimental features, to make it
more clear what is supported, opencl/subdivision is experimental.
* Remove cycles xml exporter, was just for testing.
