This reverts commit d53862351d.
After conducting tests with artists at the studio, it was observed that
altering the Transform Modal Maps caused significant disruption due to
the heavy reliance on the "Proportional Editing" and "Automatic
Constraint" features.
Considering this, it is now deemed more beneficial to provide users
with the choice of adapting their muscle memory to the new changes.
Pull Request: https://projects.blender.org/blender/blender/pulls/109660
This PR adds a new operator to run a node group on object geometry.
Only curves sculpt mode is supported for now, to simplify the design.
A new geometry node editor context to edit operator groups is also
added. This allows changing any node group, rather than only node
groups that are part of the active modifier context.
3D viewport menus are added with any geometry node group
asset in a catalog that contains the `Operator` tag. Currently Blender
must be restarted to refresh the list of available operators.
This is only the first phase of the node group operator feature.
Many more features will be added in next steps.
See #101778
Pull Request: https://projects.blender.org/blender/blender/pulls/108947
As suggested in #108669, the "Navigate during Transform" option has
been removed and this feature works by default.
Now if you press `G`, `R` or `S` to move, rotate or scale an object you
can also navigate in the viewport.
Note that this update modifies the default keymap.
Now pressing `Alt` is required for the following modals:
- `PROPORTIONAL_SIZE_UP`,
- `PROPORTIONAL_SIZE_DOWN`,
- `PROPORTIONAL_SIZE`,
- `AUTOIK_CHAIN_LEN_UP`,
- `AUTOIK_CHAIN_LEN_DOWN`,
- `AUTOCONSTRAIN`,
- `AUTOCONSTRAINPLANE`.
Pull Request: https://projects.blender.org/blender/blender/pulls/109388
Added selection support to the Follow Active Quads operator.
Simplified code and added comments.
Also added new error codes:
* STATUS_ERR_MISSING_UV_LAYER
* STATUS_ERR_NO_FACES_SELECTED
Pull Request: https://projects.blender.org/blender/blender/pulls/109095
Adds an optional list of panels to node trees. Each socket can be
assigned a panel. UI panels will be created in the future in the
modifier for these grouped sockets.
Panels are stored as a pointer array in node trees, next to socket
declarations. Each panel has a name, but it does not have to be unique.
In future a panel might also store whether it is visible by default and
similar information.
C API and RNA API are both added. Panels and their socket
assignments are accessible to users through another list in the "Group"
tab of the node editor sidebar.
Sockets in the same panel will remain together even when adding,
removing, or moving sockets or panels, renaming, etc.
A socket can be moved up or down within a panel but each panel
remains a contiguous block. Actual tree views may be created later.
Pull Request: https://projects.blender.org/blender/blender/pulls/108649
Caused by 5ca65001ea (which was already patched with ae7c71ef09 and
fa5cc84a0a)
Getting the right modifier would still fail / throw errors when not done
from the modifier extra ops dropdown.
Only there, a 'modifier' attribute is set for context (via
`uiLayoutSetContextPointer` in `modifier_ops_extra_draw`).
So now check if a 'modifier' attribute is set for context (and fallback
to using the active modifier instead).
This way, polling errors in F3 search are gone and you can actually
execute the operators which are also in modifier extra ops dropdown from
elsewhere (e.g. F3 search).
Pull Request: https://projects.blender.org/blender/blender/pulls/108795
Now the operator is used for both the internal & external editor,
so there is no need for the caller to call this operator only when
the preferences are set.
Add a user preference to set up a custom text editor for editing text
files with the "Edit Source" action in the UI context menu.
- An operator TEXT_OT_jump_to_file_at_point has been added.
- A custom editor can be set in the user preferences.
- A preset has been included for "Visual Studio Code".
- When the editor is not set, use Blender's internal editor.
Ref !108299.
Since ccc9eef1b9, the asset-library-reference isn't required anymore to
get the full path of an asset. So don't check for this in the `poll()`
method of the operator.
- "Invalid" in transformation messages.
- For three messages, translation occured after a string
- concatenation, so the full message was not found.
Instead, translate a format pattern and format it afterwards.
- Alembic errors when there is an import type mismatch.
Pull Request: https://projects.blender.org/blender/blender/pulls/108212
`PREFERENCES_OT_copy_prev` handling of versionning was for older release
cycles type (pre-3.0), now that we are in 4.0, we can use a simpler
logic: Just look for startup data from this major release cycle (i.e.
4.x currently) and the previous one (i.e. all 3.x releases).
Fixes the 're-use previous settings' option not showing when first
starting 4.0 build.
The Quick Fur operator creates a curves object with hair modifiers and
a material.
These modifiers' and material's names can be translated if the user
chose to translate data in the preferences.
Only the modifier names are translated, the node groups are not
because they may be reused instead of appended again.
Pull Request: https://projects.blender.org/blender/blender/pulls/107909
When adding a new simulation zone, the input and output would be
accessed by their name, however the name can be translated if the user
has enabled translation of data.
Instead, get the first socket of type 'GEOMETRY' in the simulation
input and output nodes.
Pull Request: https://projects.blender.org/blender/blender/pulls/107819
- "... (matches pythons ...)": capitalize and use possessive ('s).
- "Layer Proxy Protection": replace proxy by override, following 2.80.
- "Enable Plane Trim": expand description.
- "Make curve path children to rotate along the path": remove "to".
- "Option for curve-deform: make deformed child to stretch along
entire path": remove "to".
- "... apply the curve radius with path following it and deforming":
rephrase unclear description.
- "Custom light falloff curve" : unrelated to lights, used in Grease
Pencil modifiers.
- "Grease Pencil layer assigned to the generated strokes": rephrase
because a GP stroke is assigned to a layer, not the other way
around.
- "Attribute domain where the attribute domain is stored in the
simulation state": remove second "domain" (typo).
Pull Request: https://projects.blender.org/blender/blender/pulls/107916
This makes the URL links to blender.org to have more information than
just utm_source=blender
For example:
* utm_source=blender-3.6.0-alpha
* utm_source=blender-3.3.16-release
Pull Request #107849
This fuctionality allow the Blender project to know if users
are reaching our websites from within Blender:
* User Manual
* Python API
* Release Notes
* Development Fund
Pull Request #107849
This adds support for building simulations with geometry nodes. A new
`Simulation Input` and `Simulation Output` node allow maintaining a
simulation state across multiple frames. Together these two nodes form
a `simulation zone` which contains all the nodes that update the simulation
state from one frame to the next.
A new simulation zone can be added via the menu
(`Simulation > Simulation Zone`) or with the node add search.
The simulation state contains a geometry by default. However, it is possible
to add multiple geometry sockets as well as other socket types. Currently,
field inputs are evaluated and stored for the preceding geometry socket in
the order that the sockets are shown. Simulation state items can be added
by linking one of the empty sockets to something else. In the sidebar, there
is a new panel that allows adding, removing and reordering these sockets.
The simulation nodes behave as follows:
* On the first frame, the inputs of the `Simulation Input` node are evaluated
to initialize the simulation state. In later frames these sockets are not
evaluated anymore. The `Delta Time` at the first frame is zero, but the
simulation zone is still evaluated.
* On every next frame, the `Simulation Input` node outputs the simulation
state of the previous frame. Nodes in the simulation zone can edit that
data in arbitrary ways, also taking into account the `Delta Time`. The new
simulation state has to be passed to the `Simulation Output` node where it
is cached and forwarded.
* On a frame that is already cached or baked, the nodes in the simulation
zone are not evaluated, because the `Simulation Output` node can return
the previously cached data directly.
It is not allowed to connect sockets from inside the simulation zone to the
outside without going through the `Simulation Output` node. This is a necessary
restriction to make caching and sub-frame interpolation work. Links can go into
the simulation zone without problems though.
Anonymous attributes are not propagated by the simulation nodes unless they
are explicitly stored in the simulation state. This is unfortunate, but
currently there is no practical and reliable alternative. The core problem
is detecting which anonymous attributes will be required for the simulation
and afterwards. While we can detect this for the current evaluation, we can't
look into the future in time to see what data will be necessary. We intend to
make it easier to explicitly pass data through a simulation in the future,
even if the simulation is in a nested node group.
There is a new `Simulation Nodes` panel in the physics tab in the properties
editor. It allows baking all simulation zones on the selected objects. The
baking options are intentially kept at a minimum for this MVP. More features
for simulation baking as well as baking in general can be expected to be added
separately.
All baked data is stored on disk in a folder next to the .blend file. #106937
describes how baking is implemented in more detail. Volumes can not be baked
yet and materials are lost during baking for now. Packing the baked data into
the .blend file is not yet supported.
The timeline indicates which frames are currently cached, baked or cached but
invalidated by user-changes.
Simulation input and output nodes are internally linked together by their
`bNode.identifier` which stays the same even if the node name changes. They
are generally added and removed together. However, there are still cases where
"dangling" simulation nodes can be created currently. Those generally don't
cause harm, but would be nice to avoid this in more cases in the future.
Co-authored-by: Hans Goudey <h.goudey@me.com>
Co-authored-by: Lukas Tönne <lukas@blender.org>
Pull Request: https://projects.blender.org/blender/blender/pulls/104924
When pressing F3 to bring up the Search Menu, an error appeared
because the MoveModifierToNodes operator's poll method did not
consider the context where no object was selected.
Pull Request: https://projects.blender.org/blender/blender/pulls/107310
This property is not editable after 7966cd16d6,
though doing so didn't seem to give an error. It doesn't have
to be set anymore, since the data is redundant with the
"loop_start" anyway.
Give errors in a few cases:
- The mesh has no UV map
- The faces have no area
- The applied modifier has no curve data (it may have been modified)
Use errors instead of cancelling the operator completely so the
operator can still do something useful when many meshes are
selected and only some fail.
Pull Request: https://projects.blender.org/blender/blender/pulls/106823
Makes it possible to select multiple custom script directories in Preferences >
File Paths, replacing the single Scripts path option. Each of these directories
supports the regular script directory layout with a startup file (or files?),
add-ons, modules and presets.
When installing an add-on, the script directory can be chosen.
NOTE: Deprecates the `bpy.types.PreferencesFilePaths.script_directory`
property, and replaces `bpy.utils.script_path_pref` with
`bpy.utils.script_paths_pref`.
Pull Request: https://projects.blender.org/blender/blender/pulls/104876
